• Journal of the Korean institute of surface engineering
• /
• v.53 no.4
• /
• pp.190-199
• /
• 2020

Copper pyrophosphate baths were employed in order to study the dependencies of current efficiency, residual stress, surface morphology and microstructure of electrodeposited Cu thin layers on applied current density. The current efficiency was obtained to be more than about 90 %, independent of the applied current density. Residual stress of Cu electrodeposits was measured to be in the range of -30 MPa and 25 MPa with the increase of applied current density from 0.5 to 15 mA/㎠. Relatively smooth surface morphologies of the electodeposited Cu layers were obtained at an intermediate current range between 3 and 4 mA/㎠. The Cu electrodeposits showed FCC(111), FCC(200), and FCC(220) peaks and any preferred orientation was not observed in this study. The average crystalline size of Cu thin layers was measured to be in the range of 44~69 nm.

• Journal of Information Processing Systems
• /
• v.8 no.4
• /
• pp.669-684
• /
• 2012

Discrete wavelet transforms are extensively preferred in biomedical signal processing for denoising, feature extraction, and compression. This paper presents a new denoising method based on the modeling of discrete wavelet coefficients of ECG in selected sub-bands with Kernel density estimation. The modeling provides a statistical distribution of information and noise. A Gaussian kernel with bounded support is used for modeling sub-band coefficients and thresholds and is estimated by placing a sliding window on a normalized cumulative density function. We evaluated this approach on offline noisy ECG records from the Cardiovascular Research Centre of the University of Glasgow and on records from the MIT-BIH Arrythmia database. Results show that our proposed technique has a more reliable physical basis and provides improvement in the Signal-to-Noise Ratio (SNR) and Percentage RMS Difference (PRD). The morphological information of ECG signals is found to be unaffected after employing denoising. This is quantified by calculating the mean square error between the feature vectors of original and denoised signal. MSE values are less than 0.05 for most of the cases.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.236-239
• /
• 2000

Both the X-ray diffraction data of the normal direction in the sample orientation and the pole figure data of three reflections, (111), (200) and (220), were used to do the Rietveld refinement for the copper sheet prepared by a cold rolling process. The agreement between calculated and observed patterns was not satisfactory, which was attributed to the preferred orientation effect of the copper sheet. The Rietveld refinement for the copper sheet could be done successfully by applying the pole density of each reflection obtained from the corresponding inverse pole figure to the X-ray diffraction data of the normal direction. The R-weighted pattern, $R_{wp}$ was 12.99% and the goodness-of-fit indicator, S, was 3.68.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.1
• /
• pp.22-29
• /
• 2008

In this paper, we propose an adaptive color enhancement algorithm. It is used for the flat panel displays (FPDs) such as LCD, PDP, and so on. The proposed algorithm consists of an adaptive linear approximation CDF(Cumulative Density Function) algorithm and an adaptive saturation enhancement algorithm. The one is for contrast enhancement which prevents an image from the distortion by luminance transient of an input image. The other is the algorithm which improves the saturation without the contour artifact and over-saturation, whose problems are generated during the enhancing saturation. In addition, it allows to achieve the high quality image using the saturation enhancement method for a preferred color of original image. Visual test and standard deviation of their histograms have been applied to evaluate the resultant output images of the proposed algorithm.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.209-214
• /
• 2002

This research analyzes the types of resident's satisfaction and the preferred rental housing types in Gwangju. The results are summarized as follows : This study devided the characters of resident's satisfaction into four factors and classified the types of residents into three specific groups by the factors of resident's satisfaction : high dwelling density and management improvement demanding type, medium size and general satisfaction type, environmental improvement demanding type The first type includes the lowest income group and relatively high income group coincidently. They need wider living space or want improvement of the level of management service. The second type omnipresently satisfies not only medium sized living space but also other items. This type will be regarded as the inducement standard for the rental housing policy. The third type includes the lowest group in economic and physical level who wants the general upgrade of living space and management level. And, residents need long-term rental housing and wider housing area by 5 pyong.

• Journal of the Korean institute of surface engineering
• /
• v.22 no.4
• /
• pp.207-214
• /
• 1989

The surface morphology and the proferred orientation of the Pb-Sn alloy electrodeposite were investated by the change of electrolysis conditions in pulse current electroplating. The preferred orientation of Pb-phase in alloy deposits was changed in the sequence of (110)longrightarrow(100)or(100)+(111)longrightarrow(111) with increasing peak current density, while that of $\beta$-Sn phase changed from (321)+(301)to(301)+(111) mixed orientation. The surface morphology was closely related to the preferred orientation of alloy electrodeposits. The alloy deposits, which had (100)or(111) for pb-phase and (321)or(100)(301)for $\beta$-Sn sespectively, showed the surface structure of granular crystallites. The alloy deposits whih mixed orientations for both phases had microstructure of closely the closely stacked crysrallites, which was inclined to the surface.

• Journal of the Korean Ceramic Society
• /
• v.39 no.5
• /
• pp.511-516
• /
• 2002

Hexagonal $YMnO_3$ thin films were prepared from $Y(NO_3)_3{\cdot}5H_2O$ and $Mn(CH_3CO_2)_2{\cdot}4H_2O$ as starting materials on the Si(100) substrates by the sol-gel method. The crystal structure and the electrical properties of the $YMnO_3$ thin films were investigated as a function of heat treatment temperature, the amount of water(Rw) of hydrolysis and the addition of catalysis. The crystallization of the $YMnO_3$ thin film began at 700${\circ}C$ and completed at 800${\circ}C$ for 1 h. The c-axis (0001) preferred orientation of hexagonal $YMnO_3$ was detected for the $YMnO_3$ thin films with Rw=6 and that was decreased for the $YMnO_3$ thin films with Rw=1 and Rw=12. The crystallinity and preferred orientation of the $YMnO_3$ thin films were depended on the addition of acid and/or alkali catalysis, which, in turn, the preferred orientation of c-axis was decreased and the orthorhombic phase of $YMnO_3$ was detected to the specimens with the addition of catalysis. The $YMnO_3$ thin film with Rw=6 showed good leakage current density of $1.2{\times}10-8 A/cm^2$ at the applied voltage of 0.2V and the leakage current density was not changed drastically with applied voltage.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.673-681
• /
• 1995

Surface morphology and preferred orientation of 20${\mu}{\textrm}{m}$ gold electrodeposit formed from aqueous solution of the sodium gold sulfite were studied in terms of current density, plating temperature and Au concentration. As the current density changed from 13.0mA/$\textrm{cm}^2$ to 4.6mA/$\textrm{cm}^2$, the solution temperature from 3$0^{\circ}C$ to 6$0^{\circ}C$, pH from 12.0 to 9.0, agitation speed from 0 rpm to 3200rpm and Au concentration from 10g/1 to 14 g/1, local Au concentration near the cathodic surface increased. With increasing the Au concentration, the surface morphology chanced from porous structure to fine-grained structure. Furthermore, it was observed that the preferred orentation of the Au layer changed from (111) to (220) upon the same variation In the Au concentration. The surface morphology and the preferred orientation of the Au layer were found to be closely related to each other.

• Journal of Forest and Environmental Science
• /
• v.28 no.1
• /
• pp.56-62
• /
• 2012

There is little information about appropriate greenspace structures to satisfy aesthetic function in Korea. The purpose of this study was to analyze Korean's aesthetic preferences for greenspace structures concerned with urban tree plantings of an areal type to explore desirable greenspace landscapes. The study considered 5 structural variables of greenspace which were species composition, tree density, tree size, vertical and horizontal structure, and tree layout pattern. A photo-questionnaire was prepared through color simulations of different landscape types for each structural variable. Preference responses of an interval-scale rating from 214 respondents were statistically analyzed between landscape types and between respondent groups. Respondents preferred greenspace landscapes with diverse tree species to single species, higher tree density to lower density, larger trees to many smaller trees, multilayered and grouped plantings to single-layered and sparse plantings, and informal pattern to formal pattern. These preferences tended to be relatively higher for educated specialist and student groups than for other generalist group. Thus, multilayered and dense plantings in natural pattern including larger trees of diverse species, which are similar to ecological plantings, are recommended to increase aesthetic function of greenspace.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.335-337
• /
• 1989

The Charcteristics of the HCD ion plating system for TiN coating was Investigated. 1-V curvet of the HCD ( hollow cathode discharge ), radiation temperatures of the Ta tube and the Ti pool and the electron density and the temperature of the generated plasma are shown. The preferred orientation and the micro-hardness of coatings performed by HCD process are studied.