• 대한토목학회논문집
• /
• 제40권6호
• /
• pp.547-553
• /
• 2020

노후화 시설물의 증가에 따라 선제적 유지관리의 중요성은 점차 증대되고 있다. 선제적 유지관리는 시설물의 응답 계측으로부터 시작되기 때문에 높은 정밀도를 가지는 응답을 획득하는 것이 중요하다. 국부적인 응답 중 변형률은 균열 감지 및 피로 진전 예측 등에 활용가능하다. 변형률 센서는 크게 이산형 및 분포형 센서로 구분된다. 이산형 센서의 대표적인 예가 광섬유 브래그 격자(FBG)와 전기 저항식 게이지이다. 이산형 센서는 높은 정확성과 재현성(고 정밀)을 가지지만, 측정점이 제한된다는 한계를 가진다. 브릴루앙 산란 기반 광섬유 변형률 계측 시스템 중 하나인 Brillouin Optical Correlation Domain Analysis (BOCDA)은 대표적인 분포형 센서이며, 5 cm 라는 높은 공간 분해능을 가진다. BOCDA는 투영된 광원에서 발생하는 산란파를 이용하여 광섬유 전 구간의 변형률을 계측한다. 측정점이 많아지는 장점이 있으나, 이산형 센서에 낮은 정확도와 재현성을 가진다. 본 연구에서는 고 정밀 데이터(이산형 센서)와 저 정밀 데이터(분포형 센서) 각각의 장점을 융합하는 후처리 기법을 제안하였으며, 이에 대한 가능성을 검증 실험을 통해 확인했다.

• Coupled systems mechanics
• /
• 제6권4호
• /
• pp.439-464
• /
• 2017

The hydro-elastic system consisting of a pre-stretched highly elastic plate, compressible Newtonian viscous fluid, and the rigid wall is considered and it is assumed that on the plate a lineal-located time-harmonic force acts. It is required to investigate the dynamic behavior of this system and determine how the problem parameters and especially the pre-straining of the plate acts on this behavior. The elasticity relations of the plate are described through the harmonic potential and linearized (with respect to perturbations caused by external time-harmonic force) form of these relations is used in the present investigation. The plane-strain state in the plate is considered and the motion of that is described within the scope of the three-dimensional linearized equations of elastic waves in elastic bodies with initial stresses. The motion of the fluid is described by the linearized Navier-Stokes equations and it is considered the plane-parallel flow of this fluid. The Fourier transform with respect to the space coordinate is applied for a solution to the corresponding boundary-value problem. Numerical results on the frequency response of the interface normal stress and normal velocity and the influence of the initial stretching of the plate on this response are presented and discussed. In particular, it is established that the initial stretching of the plate can decrease significantly the absolute values of the aforementioned quantities.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권3호
• /
• pp.186-195
• /
• 2010

본 논문은 SC합성보에 정착구의 높이, 새들의 형태, 가력시점을 변수로 하여 비부착 포스트텐션 보강을 하고 휨실험을 통해 보강방법을 평가하여 적절한 보강방법을 제시하고자 하엿다. 실험결과 보강 전 SC합성보의 최대내력은 실험값/이론값이 0.97로 나타났으나 보강 후는 1.00~1.21로 나타나 보강효과를 확인할 수 있었다. 변위 및 변형률 분석결과 정착구의 높이 및 가력시점에 상관없이 보강 후 중립축에 정착구를 설치한 D120계열 실험체가 최대하중이후 급격한 하중저하 없이 변위가 지속적으로 증가하며 각 부분의 변형률도 비교적 적게 나타나는 안정적인 거동을 했다. 보강효과면에서 선 가력 후 보강한 SCR-UD120실험체가 보강 전 SC합성보에 비해 최대내력이 1.72배 증가하여 가장 우수한 것으로 나타났다.

• The Plant Pathology Journal
• /
• 제20권1호
• /
• pp.63-66
• /
• 2004

Ginseng (Panax ginseng) is one of the most widely cultivated medicinal herbs in Korea. However, yield losses reached up to 30-60％ due to various diseases during 3 or 5 years of ginseng cultivation in the country. Therefore, successful production of ginseng roots depends primarily on the control of diseases. The objective of this study was to select potential biocontrol agents from rhizobacteria isolated from various plant internal root tissues for the control of multiple ginseng diseases as an alternative to fungicides. Among 106 Bacillus strains, two promising biocontrol agents, Bacillus pumilus strain B1141 and Paenibacillus lentimobus strain B1146, were selected by screening against root rot of ginseng caused by Cylindrocarpon destructans in a greenhouse. Pre-inoculation of selected isolates to seed or l-year-old root of ginseng resulted in stimulation of shoot and/or root growth of seedlings, and successfully controlled root rot caused by C. destructans (P<0.05). Furthermore, drenching of cell suspension of the selected isolates on seedling-growing pots reduced the incidence of Phytophthora blight after the seedlings were challenged with zoospores of Phytophthora cactorum (P<0.05). P. lentimorbus strain B1146 showed antifungal activity against various soil-borne pathogens in vitro, while B. pumilus strain B1141 did not show any. Results of this study suggest that some rhizobacteria can induce resistance against various plant diseases on ginseng.

• Advanced Composite Materials
• /
• 제17권2호
• /
• pp.125-137
• /
• 2008

FBG (Fiber Bragg Grating) sensors and optical fibers were embedded into CFRP dry preforms before resin impregnation in VaRTM (Vacuum-assisted Resin Transfer Molding). The embedding location was the interface between the skin and the stringer in a CFRP-stiffened panel. The reflection spectra of the FBG sensors monitored the strain and temperature changes during all the molding processes. The internal residual strains of the CFRP panel could be evaluated during both the curing time and the post-curing time. The temperature changes indicated the differences between the dry preform and the outside of the vacuum bagging. After the molding, four-point bending was applied to the panel for the verification of its structural integrity and the sensor capabilities. The optical fibers were then used for the newly-developed PPP-BOTDA (Pulse-PrePump Brillouin Optical Time Domain Analysis) system. The long-range distributed strain and temperature can be measured by this system, whose spatial resolution is 100 mm. The strain changes from the FBGs and the PPP-BOTDA agreed well with those from the conventional strain gages and FE analysis in the CFRP panel. Therefore, the fiber-optic sensors and its system were very effective for the evaluation of the VaRTM composite structures.

• The Plant Pathology Journal
• /
• 제23권1호
• /
• pp.22-25
• /
• 2007

Biocontrol activity of five strains of selected rhizo-bacteria were tested in tomato against bacterial wilt caused by Ralstonia solanacearum. After root bacterization the plants were grown in a perlite-hydroponic system. Upon challenge inoculation with the pathogen, all of the rhizobacterial strains efficiently suppressed the bacterial wilt in tomato in various rates, at maximum by the strain, Bacillus vallismortis strain EXTN-1. While the percent of infected plants in the non-bacterized control plants were 95%, it was only 65% in plants pre-treated with EXTN-1. It was also demonstrated that the movement of R. solanacearum within the stem was significantly hampered when the plants were root bacterized. As EXTN-1 has no antagonistic properties against R. solanacearum, the bacterial wilt was probably suppressed by a mechanism other than antibiosis. Previously, the strain had been proven to produce an efficient elicitor for inducing systemic resistance in many crops. As the present study confirmed that EXTN-1 has the ability for reducing the pathogen spread in tomato, the strain could be effectively used as a potential biocontrol agent against bacterial wilt.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권2호
• /
• pp.241-248
• /
• 2019

Objective: To isolate and identify new methanogens from the rumen of Holstein steers in Korea. Methods: Representative rumen contents were obtained from three ruminally cannulated Holstein steers ($793{\pm}8kg$). Pre-reduced media were used for the growth and isolation of methanogens. Optimum growth temperature, pH, and sodium chloride (NaCl) concentration as well as substrate utilization and antibiotic tolerance were investigated to determine the physiological characteristics of the isolated strain. Furthermore, the isolate was microscopically studied for its morphology. Polymerase chain reaction of 16S rRNA and mcrA gene-based amplicons was used for identification. Results: One strain designated as KOR-2 was isolated and found to be a non-motile irregular coccus with a diameter of 0.2 to $0.5{\mu}m$. KOR-2 utilized $H_2+CO_2$ and formate but was unable to metabolize acetate, methanol, trimethylamine, 2-propanol, and isobutanol for growth and methane production. The optimum temperature and pH for the growth of KOR-2 were $38^{\circ}C$ and 6.8 to 7.0, respectively, while the optimum NaCl concentration essential for KOR-2 growth was 1.0% (w/v). KOR-2 tolerated ampicillin, penicillin G, kanamycin, spectromycin, and tetracycline. In contrast, the cell growth was inhibited by chloramphenicol. Phylogenetic analysis of 16S rRNA and mcrA genes revealed the relatedness between KOR-2 and Methanoculleus bourgensis. Conclusion: Based on the physiological and phylogenetic characteristics, KOR-2 was thought to be a new strain within the genus Methanoculleus and named Methanoculleus bourgensis KOR-2.

• 대한토목학회논문집
• /
• 제42권2호
• /
• pp.151-162
• /
• 2022

스마트 건설 기술의 도입으로 공장에서 일괄 대량생산이 가능한 프리팹 부재에 대한 관심이 높아졌다. 프리팹 프리스트레스 콘크리트 거더는 가설시 프리팹 바닥판과의 정합성을 위해 제작부터 가설 전 단계까지 거더의 형상관리가 중요하다. 이 연구에서는 프리팹 거더의 상연 및 하연에 병치된 변형률 측정치를 이용한 캠버 재구성 기법을 제시한다. 특히, 긴장력 도입 이후 가설 전까지 콘크리트의 시간 의존적 거동이 고려된 변형률 데이터에 대해 캠버 재구성 기법을 적용한다. 몬테카를로 수치 모사를 통해 제한된 센서의 개수, 계측 오차 그리고 비선형적 시간 의존적 거동들에 대해 재구성된 캠버의 통계적 정확도를 분석하고 타당성을 검증한다.

• Steel and Composite Structures
• /
• 제49권4호
• /
• pp.381-392
• /
• 2023

This study experimentally investigates the flexural behavior of steel-UHPC composite slabs composed of an innovative negative Poisson's ratio (NPR) steel plate and Ultra High Performance Concrete (UHPC) slab connected via demountable high-strength bolt shear connectors. Eight demountable composite slab specimens were fabricated and tested under traditional four-point bending method. The effects of loading histories (positive and negative bending moment), types of steel plate (NPR steel plate and Q355 steel plate) and spacings of high-strength bolts (150 mm, 200 mm and 250 mm) on the flexural behavior of demountable composite slab, including failure mode, load-deflection curve, interface relative slip, crack width and sectional strain distribution, were evaluated. The results revealed that under positive bending moment, the failure mode of composite slabs employing NPR steel plate was distinct from that with Q355 steel plate, which exhibited that part of high-strength bolts was cut off, part of pre-embedded padded extension nuts was pulled out, and UHPC collapsed due to instantaneous instability and etc. Besides, under the same spacing of high-strength bolts, NPR steel plate availably delayed and restrained the relative slip between steel plate and UHPC plate, thus significantly enhanced the cooperative deformation capacity, flexural stiffness and load capacity for composite slabs further. While under negative bending moment, NPR steel plate effectively improved the flexural capacity and deformation characteristics of composite slabs, but it has no obvious effect on the initial flexural stiffness of composite slabs. Meanwhile, the excellent crack-width control ability for UHPC endowed composite members with better durability. Furthermore, according to the sectional strain distribution analysis, due to the negative Poisson's ratio effect and high yield strength of NPR steel plate, the tensile strain between NPR steel plate and UHPC layer held strain compatibility during the whole loading process, and the magnitude of upward movement for sectional plastic neutral axis could be ignored with the increase of positive bending moment.

• 한국해양학회지:바다
• /
• 제14권1호
• /
• pp.63-68
• /
• 2009

광생물학적 수소생산 잠재력을 가진 다양한 미소생물 가운데, 남세균은 21세기의 수소경제 시대에 적합한 생물군으로 오랫동안 알려져 왔다. 광생물학적으로 수소에너지를 생산하게 될 경우, 해양 단세포성 질소고정 남세균은 남세균류의 하부 분류군들 가운데 가장이상적인 종류의 하나로 평가되고 있다. 단세포성 질소고정 남세균을 이용한 수소생산 기술을 개발하기 위해 반드시 고려해야 할 3가지 사항은 1) 자연계에 존재하는 최우수 수소생산 종주의 확립 2) 광생물학적 수소생산을 뒷받침하는 종주-특이적 최적조건의 탐색 3) 유전학적 방법을 이용한 수소생산 종주의 개량 등이다. 본고에서는 광생물학적 수소생산기술의 상업화를 향한 최근의 연구 개발 추세를 돌아보고, 해양 단세포성 남세균 종주를 이용한 광생물학적 수소생산 기술 분야에서 한국의 세계선도적 지위 확보를 위해서는 향후 10-15년간 집중적인 연구 개발이 절실함을 제안하고자 한다.