• 제목/요약/키워드: pre-painted

검색결과 14건 처리시간 0.026초

자동차 선도장 강판용 폴리에스테르 폴리올 기반 폴리우레탄의 합성과 물성에 대한 연구 (Study for Synthesis and Properties of Polyurethane Based on Polyester Polyol with Varying Hydroxyl Values for Automotive Pre-painted Metal Sheet Applications)

  • 강충열;이재영;노승만;남준현;박종명;정현욱;유상수
    • 접착 및 계면
    • /
    • 제12권1호
    • /
    • pp.34-42
    • /
    • 2011
  • 자동차용 도장시스템으로 새롭게 대두되고 있는 roll coating process는 비친환경적이면서도 생산성이 떨어지는 기존의 습식도장공정을 완전 대체할 수 있는 기술로 알려져 있다. Pre-painted 강판 시스템에서 도막 유연성 및 강도 등의 구현을 위하여 경화거동뿐만 아니라 내식성 및 성형가공성, 유변학적 거동 등의 평가가 매우 중요하다. 본 연구에서는 pre-painted system에 적용하기 위하여 polyester 수지를 수산화기 및 분자량 변성을 통하여 합성한 후, 경화거동 및 딥드로잉, 인장력, 유변특성 등을 평가하였다. 40 (mg KOH-/mol)정도의 수산화기를 갖는 N-0375-40 system이 유연성 및 도막강도, 경화거동 등의 가장 우수한 물성을 나타내었다.

Development of Heat Absorbing and High Electromagnetic Shielding Pre-Painted Steel Sheet

  • Hosokawa, Tomoaki;Ueda, Kohei;Yuasa, Kensei;Nakazawa, Makoto
    • Corrosion Science and Technology
    • /
    • 제9권4호
    • /
    • pp.153-158
    • /
    • 2010
  • Electrical appliances such as audiovisual equipment and personal computers have recently had heat and electromagnetic problems. In order to solve those problems, 'High heat absorbing pre-painted steel sheet (hereinafter referred to as PSS)', 'High electromagnetic shielding PSS' and 'High heat absorbing and high electromagnetic shielding PSS' have been developed. In this paper, the heat characteristics and electromagnetic shielding properties of PSS are investigated by methods that use enclosures and their mechanisms are discussed. It was found that 'High heat absorbing PSS' and 'High heat absorbing and high electromagnetic shielding PSS'could reduce the heat problem. The mechanism of the heat characteristics was presumed for the high heat absorptivity of the back coating inside the enclosure. And it was also found that 'High electromagnetic shielding PSS' and 'High heat absorbing and high electromagnetic shielding PSS' could shield electromagnetic waves well. The mechanism of the electromagnetic shielding properties was considered for the low transfer impedance of the back coating inside the enclosure. 'High heat absorbing PSS' and 'High electromagnetic shielding PSS' have been adopted as materials for electrical appliances and 'High electromagnetic shielding and high heat absorbing PSS' have been tested for that purpose.

Effect of Pre-immersion Time on Electrophoretic Deposition of Paint on AZ31 Magnesium Alloy

  • Van Phuong, Nguyen;Moon, Sungmo
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2014년도 추계학술대회 논문집
    • /
    • pp.45-45
    • /
    • 2014
  • The importance of magnesium alloys has significantly increased due to their low density, high strength/weight ratio, very good electromagnetic shielding features and good recyclability. However, unfortunately, Mg alloys are very susceptible to corrosion due to their high chemically activities (= -2.356 V vs. NHE at $25^{\circ}C$), hence, most commercial Mg alloys require corrosion protective coatings. Organic coating such as painting, powder coating and electrophoretic deposition of paint (E-paint) is typically used in the final stages of the coating process of Mg alloys. In this study, effect of pre-immersion time on the deposition of E-paint on AZ31 Mg alloy was investigated. It was found that during pre-immersion time, AZ31 Mg alloy rapidly reacts with E-paint solution and paint can be self-deposited on the AZ31 surface without applying of electric current. The pore size on the E-painted AZ31 Mg alloy increased with increasing pre-immersion time from 0 to 5 min. Both adhesion and corrosion resistance of E-painted AZ31 Mg alloy decreased with increasing pre-immersion time. The best E-paint AZ31 Mg alloy, which showed stronger adhesion after water immersion test and good corrosion resistance, was started to deposit after 5 s of pre-immersion time.

  • PDF

자동차 선도장용 베이스코트에서 알루미늄 입자 크기와 형태에 따른 물성 연구 (A Study on Properties with Particle Size and Type of Aluninum in Pre-painted Basecoat of Automotive)

  • 이재우;이미춘;조을룡
    • Elastomers and Composites
    • /
    • 제49권2호
    • /
    • pp.160-166
    • /
    • 2014
  • 자동차 선도장용으로 알루미늄 페이스트를 사용하여 6가지 베이스코트용 포뮬레이션이 설계되었다. 알루미늄 페이스트는 pancake 형태의 금속 안료인 #501, #801, #601와 cornflake 형태의 금속 안료인 #750, #770, #790가 사용되었다. 베이스코트의 상대적인 경화 밀도는 #501, #801, #601, #750, #770, #790 순으로 증가하였다. T-bending, 내충격성, 테이핑 부착력은 경화 밀도의 증가에 따라 향상되었다. Cornflake 형태의 안료에 대한 외관(combined factor) 테스트에서 입자가 가장 작은 #790이 다른 두 가지(#750, #770)와 비교하였을 때 가장 좋은 combined factor를 보여 주었다.

P.V.D.F 페인트 도장강판의 연속공정하의 열처리 조건에 따른 물성 변화 연구 (Study on Physical Properties of Polyvinylidene fluoride Paint Coated Steel by Thermal Treatment Condition under Continuous Mass Production)

  • 정민영;김용희;이보룡;문만빈
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2015년도 춘계학술대회 논문집
    • /
    • pp.187-187
    • /
    • 2015
  • Polyvinylidene fluoride (PVDF) 코팅은 뛰어난 내후성으로 인해 Pre-painted metal에 많이 응용되며 주로 고가의 건축물 외장재에 적용되고 있는데, 수지의 열가소성 특성으로 인해 도막경화시 Baking 온도 및 냉각속도가 도막의 결정화도에 영향을 주어 가공특성이 상이하게 변함을 확인 하였다.

  • PDF

접착제 경화시점에 따른 하이브리드 접합 파단모드 및 접합강도 평가 (Evaluation of Failure Mode and Strength on Baking Time of Adhesive for Hybrid Joining)

  • 최철영;;최원호;김준기;김종훈;박영도
    • Journal of Welding and Joining
    • /
    • 제29권6호
    • /
    • pp.49-55
    • /
    • 2011
  • With the development of pre-painted steel sheets for automotive body application, a new joining method is required such as hybrid joining with combination of adhesive bonding and mechanical joining. The objective of this study is to investigate the effect of pre- and post-baking of adhesive bonding on failure mode and strength of hybrid joining of automotive steel sheets. Experiments show that the hybrid joining exhibits better bonding strength and displacement than conventional adhesive joining and mechanical fastening each. Comparison of pre- and post-baked hybrid joining results suggested that baking at $160^{\circ}C$ after mechanical joining was found to have higher joining properties than pre-baking condition. The prebaking condition changed its fracture mode from interfacial to button fracture. The changes in fracture mode with post-baking of hybrid joining was attributed to variation in neck thickness and undercut of joint.

미국형 기사의 탄생: 에드윈 어스틴 애비의 벽화에 등장하는 중세 기사의 기원과 사회적 기능 연구 (The Birth of American Knights: A Study on the Origin and Social Function of the Medieval Knights appeared in Edwin Austin Abbey's Murals)

  • 이미경
    • 미술사와시각문화
    • /
    • 제22호
    • /
    • pp.254-279
    • /
    • 2018
  • 본 논문은 에드윈 어스틴 애비의 벽화 ${\ll}$성배의 탐색${\gg}$에 등장하는 중세 기사의 기원과 사회적 기능에 관한 연구이다. 미국 문화에서 중세 기사 유형은 1850년대 말문학에서 먼저 등장했으며, 1870년대에는 정치 카툰에서도 다루어졌다. 아메리칸 르네상스 벽화 중에서는 1895년 애비의 벽화에서 처음 나타났다. 중세 기사는 영국에서 라파엘전파 화가들이 즐겨 그린 주제였다. 영국에서활동한 애비는 라파엘전파 회화와 로열 아카데미의 회화 전통을 종합하여 중세기사를 형상화했다. 그러나 신체적 활동에 기반한 모험담을 강조한 라파엘전파화가들과 달리, 애비는 기사의 도덕성을 강조했다. 이는 애비가 1890년대 미국도금시대의 사회적, 경제적 상황을 고려한 결과로 풀이된다. 미국은 남북전쟁 이후 경제적 번영을 이루었으나 화려한 경제 성장 이면에는 사회의 안정과 결속을해치는 부정부패, 빈부격차, 그로 인한 계급사회의 갈등이 도사리고 있었다. 극심한 빈부 격차는 사회적 위기로 이어졌다. 문학과 미술에서는 이에 대한 자각과 자성을 촉구했다. 애비는 도금시대 자본가의 만행을 고발하고 개혁의 희망을 담은벽화 ${\ll}$성배의 탐색${\gg}$을 제작했으며, 개혁의 이상을 실현시킬 수 있는 지도자의 상징으로 갤러해드를 선택했다. 애비의 벽화는 보스턴 공공 도서관에 설치되어 정부의 부패와 그로 인한 경제적, 사회적 혼란에 대한 경각심을 불러일으키고 자치 단체의 도덕성 쇄신을 촉구하는 공적 기능을 수행했다. 도덕적 책임감을 강조한 애비의 미국형 기사는 또한 애국심을 고취하는 매개체가 되었다. 이 작품에서 중세 유럽 기사는 미국 시민으로 탄생했으며, 시민적 덕목을 지닌 지도자의 표상으로 변화했다.

알루미늄 철도차량 차체 제작 및 도장 기술 개발 (Development of Construction and Painting Technology for the Aluminum Carbody of Rolling stock)

  • 서승일;김진태;박일철;이동헌;신돈수
    • 한국철도학회논문집
    • /
    • 제2권2호
    • /
    • pp.1-5
    • /
    • 1999
  • Based on the development of designed technology for aluminum carbody. the prototype aluminum carbody has been constructed. All extrusion profiles required for the carbody has been produced and their quality has also been proven. For sound construction. welding technology to join aluminum extrusion profiles has been developed and jigs for precise assembly of blocks have been made. The aluminum carbody for urban subway train has been completed with the required chamber being set and the welding deformations being constrained by jigs. The safety of the carbody structure has also been proven by the static load test. And also, painting technology has been developed and the surface of the carbody has been pre-treated and painted. The developed technology to construct the aluminum carbody can be used in mass production of aluminum cars ordered by domestic and foreign customers.

  • PDF

Model Cut-edge Formed on Zinc Coated Steels by Laser Machining and Its Corrosion Behavior

  • Sakairi, Masatoshi;Kageyama, Akihiro;Kikuhchi, Tatsuya
    • Corrosion Science and Technology
    • /
    • 제9권1호
    • /
    • pp.29-33
    • /
    • 2010
  • Laser machining technique, which is used focusing pulse YAG laser beam irradiation was applied to form area ratio controlled model cut-edge on pre painted Zn coated steels. A corrosion behavior of formed model cut-edge was investigated by rest potential measurement in 1 mol $m^{-3}$ NaCl with and without 0.5 kmol $m^{-3}$ $H_3BO_4$/0.05kmol$m^{-3}$ $Na_2B_4O_7$. The rest potential showed almost constant value with fluctuations. The amplitude of fluctuations increased with exposed area of steel surface. White corrosion products of zinc oxide and simonkollite was formed after the experiments at the formed model cut-edge.

식물에서 추출한 살충.살균제가 문화재 재질에 미치는 영향 - 견직물, 면직물, 저마직물, 한지, 안료분말, 채색편 - (The Effects of Various Vegatable Pesticides on Materials of Cultural Property - Dyed and Undyed Silk Fabrics, Cotton Fabrics and Korean Papers, Undyed Ramie Fabric, Pigments, Painted Plates -)

  • 오준석
    • 보존과학회지
    • /
    • 제20권
    • /
    • pp.9-22
    • /
    • 2007
  • 문화재의 생물방제를 목적으로 개발되어 시판되고 있는 3종의 식물 추출 천연 살충 살균제에 대한 문화재의 재질에 미치는 영향을 평가하였다. 평가 대상 재질은 1) 견직물 : 염색하지 않은 견직물, 황벽, 오배자, 오배자(명반 후매염), 오배자(녹반 후매염), 치자, 울금, 도토리, 도토리(녹반 후매염), 자초, 천근, 천근(명반 후매염), 홍화(홍염색), 소목, 소목(명반 선매염, 후매염) 염색 및 쪽, 쪽과 황벽 복염, 쪽과 소목 복염 견직물 2) 면직물 : 염색하지 않은 면직물, 황벽, 오배자, 오배자(명반 후매염), 치자, 도토리, 도토리(녹반 후매염), 자초, 천근, 천근(명반 후매염), 홍화(홍염색), 소목, 소목(명반선매염, 후매염) 염색 및 쪽, 쪽과 소목 복염 면직물, 3) 염색하지 않은 저마직물 4) 한지 : 염색하지 않은 한지, 소목, 쪽, 치자, 홍화(홍염색), 황벽 염색 한지 5) 안료분말 :석청 석록, 연단, 석간주, 주사, 주, 패각호분, 밀타승,대자, 석황, 쪽, 백토, 연백 남전 5)채색편 : 석청, 석록, 연단, 석간주, 주사, 주, 패각호분, 밀타승, 대자, 석황, 쪽, 백토, 연백, 남전이다. 시험은 시료를 습도 $55{\pm}1%$. 온도 $20{\pm}2^{\circ}C$의 환경에서 약제의 권장 농도의 10배에 9개월간 노출 시킨 후 기준 시료와의 색차와 인장강도를 비교 평가하였다. 약제 노출 후 염색을 하지 않은 견직물 면직물 저마직물 한지는 약제에 의한 색상 변화는 거의 일어나지 않았으나, 염색 견직물 면직물 한지는 도토리나 천근 염색 직물 등이나 치자 염색 한지를 제외하고는 대부분 일반인도 인식이 가능한 뚜렷한 색상차가 발생하였다. 특히 울금 염색 견직물은 가장 색상차가 뚜렷하였다. 그리고 안료분말이나 채색편은 납, 구리, 비소, 수은 함유 안료 및 식물성 안료 등에서 뚜렷한 색상차가 발생하였다. 인장강도는 염색하지 않은 견직물은 약제에 거의 변화가 없으며 면직물은 약간 감소하는 경향을 보이나, 염색을 한 견직물이나 면직물은 강도의 증가나 감소가 뚜렷하였다. 특히 천근 염색 견직물은 10% 이상의 강도 감소가, 쪽 염색 견직물은 10% 이상의 강도 증가가 일어났으며, 천근과 소목(명반 후매염) 염색 면직물은 10% 이상의 강도 감소 현상이 일어났다.

  • PDF