• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.141-149
• /
• 2018

This study aimed to investigate the efficacy of eco-friendly leather dyeing by utilizing food wastes. Natural dyeing of eel skin was attempted using onion peels which have been used commonly for natural dyeing of textile fabrics. Eel skin is a by-product from fishery processing and is used mainly for making leather products. The colorant was extracted from onion peels in boiling water, concentrated, and freeze-dried. Dyeing of eel skin was carried out to study the effects of dyeing conditions, mordant type and mordanting method on dye uptake, color change, drape stiffness and colorfastness. The optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature, 60min of dyeing time at 1:100($H_2O$ 90%: ethanol 10%) of bath ratio. The onion peels produced yellowish color on eel skin. The pre-mordanting was effective than the post-mordanting. As a result of the drape stiffness measurement, the Fe-mordanted sample was somewhat stiffer comparing to other mordanted samples. The light fastness of the non-mordant dye was excellent in 3-4 grade. Drycleaning fastness and rubbing fastness showed excellent results, but fastness was not significantly improved by mordanting.

• 복식문화연구
• /
• 제24권6호
• /
• pp.817-824
• /
• 2016

The introduction of natural dyes into modern dye houses is very promising green chemistry concept that should be popularized more to reduce the dependency of leather dyeing on some toxic and non-biodegradable synthetic dyes. In this study, the properties of dyeing of cochineal on cow leather were evaluated. The proper dyeing conditions were identified with dye uptake (K/S values) depending on the colorant concentration, dyeing duration, dyeing temperature, and dye bath pH. For the proper mordanting conditions, color changes for different mordants were observed as $La^{*}b^{*}$ and H V/C values. Color fastness (light, rubbing, and dry cleaning) was also examined. Additionally, antibacterial properties and UV protection were examined. The results were as follows: The optimized dyeing conditions were 300% o.w.f., $40^{\circ}C$, 40 min., and pH 5. The cow leather color was red in the absence of mordanting, while it was red purple after being mordanted with Al and Cu, and purple mordanted with Fe. The K/S value of cow leathers increased in the order of the dyeing using $AlK(SO_4)_2$ > $CuSO_4$ > $FeSO_4$. The colorfastness to light and rubbing were reduced compared to original (untreated) cow leather. However dry cleaning fastness was very satisfactory, with a 4~5 rating. The dyed and pre-mordanting dyed cow leather showed excellent antibacterial properties.

• 한국의류산업학회지
• /
• 제8권6호
• /
• pp.702-708
• /
• 2006

The purpose of this study was to investigate the dyeing-property and antibacterial activity on nylon fabric dyed with cochineal at variable dyeing conditions. Al, Cr, Fe, Cu and Sn were used as mordants and adsorption was compared with different mordanting methods. The maximum UV-visible absorption band of cochineal extract was 495 nm. The dyeability on nylon fabric was good because of having a amine group. The optimum dyeing conditions of nylon fabrics are dyeing concentration 1.5%(o.w.s), dyeing temperature $60^{\circ}C$, pH 3 and dyeing time 30 minutes. The pre-mordanting method is preferred for Al and Cr, and the post-mordanting one is preferred for Cu, Sn and Fe to achieve better dyeing. The optimum mordanting conditions of wool fabrics dyed with cochineal are mordanting concentration of 0.5%(o.w.s), mordanting temperature $60^{\circ}C$, and dyeing time 30 minutes. Nylon fabrics dyed with cochineal show a little antibacterial activity, but it was increased by Sn mordanting. MIC test results in antibacterial activities revealed that the antibacterial activity of Cu was the highest among mordants, but Sn mordant was the most effective in antibacterial activities after mordanting treatment of nylon fabric. The fastness properties of dyed nylon fabric showd a little worse or a similar level and there was no significant difference between a mordanted and non-mordanted fabric.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.74-86
• /
• 1995

Antibacterial and deodorization properties of silk fabrics dyed with Sappan wood are investigated by Halo, Shake flask, Bioassay and Detection column methods.The results are obtained as follows; 1. Although K/S values increase with Al mordant and concentrate concentrations, these are decreased in 10% Al mordant concentration in case of 4mlg dye concentration. 2. Reduction ratios of bacteria increase with K/S values in various tests. 3. When undyed silk fabrics are treated with Al mordant, reduction ratios of bacteria are not varied with Al mordant concentrations. 4. Deodorization property of Al pre-mordanted dyeing silk fabrics is better than one of unmordanted dyeing and raw silk fabrics. 5. Antibacterial properties of Cu and Cr mordanted dyeing fabrics are better than ones of the dyeing fabrics treated with the other mordants. 6. Natural dyes extracted from Sappan wood show the good antibacterial and deodorization properties, and colorant among various components contained in Sappan wood has a excellent antibacterial and deodorization properties.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.10-18
• /
• 1997

In order to study the properties of safflower yellow colors, thermodynamic parameters and dyeing properties on the silk in several dyeing conditions were investigated. The uv-visible spectra of safflower yellow colors in several solvents show hypsochromic shift with the polarity of solvent but bathochromic shift with increasing acidity of solution. The apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heat of dyeing(${\Delta}H^0$), entropy change(${\Delta}S^0$) and activation energy($E_{act}$) were calculated to be - 1.144kcal/mol, -7.498(5$0^{\circ}C$)~-3.804(9$0^{\circ}C$)cal/molㆍdeg and 0.123kcal/mol, respectively. The concentration of safflower yellow colors in the silk fiber increased with dyeing temperature, time, concentration of colors and acidity of initial dyebath. Silk fabrics were dyed bright yellow by pre-mordanting with tin chloride. Lightfastness of silk fabrics pre-mordanted by tin chloride was not excellent.

• 패션비즈니스
• /
• 제15권4호
• /
• pp.182-189
• /
• 2011

Dyeing properties of cow leather was investigated with Tumeric powder. The effects of dyeing conditions, mordanting conditions, color change, and color fastnesses were studied. The results were as follows. The dye uptake increased as dye concentration, dyeing temperature, and bath ratio increased. In the effect of dyeing time, the highest dye uptakes showed at 20 minutes and decreased after that point. Pre mordanting was more effective than the post mordanting, and the dye uptakes improved all mordanted fabrics. The highest K/S values showed in pre-Al sample, and the lowest K/S values showed in post-Cu one. The values of Hunter on the samples were more changeable $L^*$ and $b^*$ than $a^*$, and all samples showed Yellow color in Munsell value. But the mordanting methods and mordanting agents were not significant in the color changes. The light fastness of dyed samples showed 1 grade, the dry cleaning and abrasion fastnesses did not improved except post-Fe wet sample.

• 복식문화연구
• /
• 제22권6호
• /
• pp.890-898
• /
• 2014

This study focuses on the effects of dyeing conditions and mordanting conditions, changes of colorfastness, antibacterial properties and UV protective of silk fabric dyed with Laminaria japonica extracts. A natural colorant was extracted from Laminaria japonica using distilled water as extractants. According to the results, maximum dye uptake (K/S) were obtained at 100% V/V colorant concentration, $80^{\circ}C$, 60 min and pH 2. Silk fabric was dyed with Laminaria japonica extract at $80^{\circ}C$ for 60 min with pre-treatment or post-treatment of various metal salts as mordants. The Laminaria japonica extracts produced yellow hue on silk fabric in pre-mordanting and manifested green yellow hue mordanted with $CuSO_4$ in post-mordanting method. Mordant $CuSO_4$ for silk fabric was found to give good light fastness (rating 4). UV protection property did not increase significantly upon mordanting.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.294-303
• /
• 2018

In this study, eco-friendly natural dyeing for pig leather was explored by using onion skin which is food waste. Sodium caseinate was used as a pre-treatment agent to improve dyeability of pig leather and its effect on dye uptake was investigated according to treatment concentration. Dye uptake of the pre-treated pig leather was increased by about two times compared to untreated one at 0.2% pre-treatment concentration. Onion skin colorant imparted YR color on pig leather. After mordanting, the color of pretreated/dyed pig leather was varied from brick-red to khaki shades. However, mordanting did not improved dye uptake of the pre-treated/dyed pig leather significantly. The color-fastnesses of un-mordanted samples to light, dry cleaning, rubbing were grades 3-4, 5, and 4, respectively, which is good enough to meet all Korean Standard for Fastness of leather products. After mordanting, the light fastness of pig leather was improved to 4, 4-5 grade. The efficacy of sodium caseinate as a pre-treatment agent for pig leather was verified by improved dye uptake and good colorfastness. And, the natural dyeing of pig leather using food waste would be a significant sustainable way in terms of eco-friendliness and reuse of biomass to reduce environmental pollution.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.953-960
• /
• 2009

The natural dyeing of fabrics with myrobalan extract was investigated. After dyeing of silk, cotton and rayon with myrobalan extract, the dyeability of myrobalan extract was evaluated with the conditions of concentration, temperature, time, repeat-numbers, pH, mordants variables, the changes of dyeability and surface colors by methods of mordanting and color fastness. The wavelength of maximum absorption of the colored solution from myrobalan extract appeared at 272 nm. Therefore, the substance of myrobalan extract was verified as tannin dyes. The optimum dyeing of fabrics was carried out at 30%(o.w.f) dye concentration. Silk fabrics dyed with myrobalan extract showed the highest K/S value at the temperature of $80^{\circ}C$ when it was dyed for seventy minutes, while cotton and rayon fabrics showed the highest K/S value at the temperature of $90^{\circ}C$ when they were dyed for seventy minutes and thirty minutes, respectively. Dyeing operation was carried out in acidic dyebath of pH 3. The K/S value of silk fabric was higher in pre-mordant stage than in post-mordant, while the K/S values of cotton and rayon fabrics were higher in post-mordant stage. The surface colors of dyed fabrics were different according to used mordants: Al and Cu mordanted fabrics were dyed in yellowish colors, while Fe mordanted fabric was dyed in khaki-black color. Light-fastness of the color fastness was improved in Fe-mordant. Washing-fastness was relatively good, and dry cleaning-fastness of dyed fabrics was excellent.

• 한국의상디자인학회지
• /
• 제11권3호
• /
• pp.135-141
• /
• 2009

In this paper, Tagetes extracts were extracted from leave, root, stem and flower at $100^{\circ}C$ for 20 minutes. Silk fabrics were dyed with Tatetes Patula L. to investigate the dyeing properties in accordance with dye concentration, pH, temperature, time of pre-, simul- and post-treatment of mordants using the three types of mordants. As a result, the surface color of the silk fabrics was yellowish regardless of the types of mordants. However, the a values were decreased and b values were increased in the order of the dyeing using Al>Cu>Fe: Al mordanted silk fabrics were appeared in greenish yellow and Fe mordanted silk fabrics were done in redish yellow. K/S values of the silk fabrics treated with Fe mordant were 3 times higher than those of Al and Cu mordants according to the increase in dye concentration. This behaviour was shown even in the increase of mordant concentration due to the interaction of mordant and pigments of Tatetes Patula L. But, the types of mordants did not affect because the equilibrium was obtained in 20 minutes in a similar way. And it showed that the highest K/S value of the silk fabrics studied was pH 4 and $80^{\circ}C$ regardless of the types of mordants.