• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.10
• /
• pp.625-633
• /
• 2004

This paper proposed a boost input type single stage resonant power supply for driving magnetron device. The proposed power supply can control both input power factor and output power at the same time. Also, because ZVS is achieved using the resonance between leakage inductance and resonant capacitance, switching losses are drastically reduced. To prevent breakdown or moding phenomenon of the magnetron due to excessive starting voltage, variable frequency ignition method is also proposed. Experimental results for the prototype power supply are presented and discussed to verify the validity of the proposed power supply.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1078-1080
• /
• 2003

This paper proposes the boost input type resonant power supply for driving the magnetron device of the high-capacity microwave oven. Circuit topology of the proposed power supply is the boost input type resonant converter which uses the resonance between transformer leakage inductance and resonance capacitance. Proposed power supply obtains high power factor more than 98% through continuous current mode pulse width modulation. To verify the validity of the proposed power supply, operation principle in the steady state is analyzed and experimental results are presented.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.103-107
• /
• 2002

A contact-less power supply system (CPS) allows electrical energy to supply to mobile consumers without any electrical or mechanical contact. CPS works in the same principle as a transformer, with the track litz cable forming the primary circuit and the pickup as the secondary. The track power supply generates the high frequency alternating current in the track cable. The captured AC magnetic field generated by the track conductors produces electrical energy in the pickup coil and the pickup rectifier converts the high frequency AC power to DC while regulating the power to the load. This paper presents the theoretical analysis, simulation and experiment리 results of the series-parallel resonant converter working as contact-less power supply system.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.55-58
• /
• 2008

This article describes power supply infrastructure construction methods which are considered from U-City infrastructure. For the eisting city and town, it is one the issue to find an economic method to construct outside infrastructure including ubiquitous service device. Because the economic construction method could minimize the construction budget which cost big portion of U-City. And the power supply infrastructure is the fundamental layer to keep network and service layer stable. This paper suggests several ways to construct methods with keeping pre-constructed underground power cable by attaching inepensive power nodal controller working in zigbee network and introduces how to monitor and mana ge the status of power supply to network and service device.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.31-35
• /
• 2013

The emergency AC power supply system of the nuclear power plant is designed to supply the power to the nuclear power plant at the emergency operating condition. The safety function of the diesel generator at the nuclear power plant is to supply AC electric power to the safety system whenever the preferred AC power supply is unavailable. The reliable operation of onsite standby diesel generator should be ensured by a condition monitoring system designed to maintain, monitor and forecast the reliability level of diesel generator. The purpose of this paper is to improve the existing ultrasonic sensor used for condition diagnosis of engine fuel pump and cylinder head for the accurate diagnosis in actual engine condition of emergency diesel generator(EDG). As a result of this study, we could design and develop much more reliable ultrasonic sensor than existing ones.

• KIPE Magazine
• /
• v.9 no.4
• /
• pp.28-31
• /
• 2004

최근 전자제품의 소형경량화가 이루어지면서 전원장치의 고밀도화를 요구하고 있다. 이러한 기술동향에 따라 최근 DC-DC Converter를 소형, 고효율화하려는 연구가 매우 활발하게 이루어지고 있다. 각종 전자통신기기의 직류안정화 전원으로 폭넓게 이용되고 있는 Switch Mode Power Supply(SMPS) 중에 For-ward Converter에 대한 특성과 설계방법을 Simulation Program인 Power Supply Designer를 이용하여 알아보기로 한다.(중략)

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1193-1194
• /
• 2011

We performed commissioning of redundant digital excitation system for gas turbine generator. One of its issues is first power supply test to gird line when it was compared with the other commissioning. If blackout will be happened, a few of start power plants must supply power to grid line. And then generator must increase voltage and real power slowly for line charge. The trial product was installed and successfully operated at a 100MW power plant after commissioning.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.222-223
• /
• 2006

In this paper, the design of power supply for high power magnetron system is studied. For magnetron drive, three kinds of power supply is required for main high voltage, magnet and heating filament. Detail design was accomplished with basic simulation and real system is developing based on basic design.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.252-253
• /
• 2005

This paper describes a improvement of power control characteristics of ship's emergency lighting power supply(SELPS), that power factor(PF) is improved and electric power is controlled extensively, and power ON-OFF is controlled and system parameter monitored in remote distance by PC serial communication.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.313-319
• /
• 2012

The power supply rejection (PSR) of low drop-out (LDO) voltage regulator is improved by employing an error amplifier (EA) which is configured so the power supply noise be cancelled at the output. The LDO regulator is implemented in a 0.13-${\mu}m$ standard CMOS technology. The external supply voltage level is 1.2-V and the output is 1.0-V while the load current can range from 0-mA to 50-mA. The power supply rejection is 46-dB, 49-dB, and 38-dB at DC, 2-MHz, and 10-MHz, respectively. The quiescent current consumption is 65-${\mu}A$.