• 한국컴퓨터정보학회논문지
• /
• 제7권2호
• /
• pp.79-86
• /
• 2002

본 논문은 다중 공급 전압을 이용한 저 전력 스케쥴링 및 할당 알고리듬을 제안한다. 다중 공급 전압스케쥴링에서는 전력소비를 줄이기 위해 다른 전압 레벨을 이용해 실험적으로 가능한 연산을 수행하여 제어 스텝을 결정한다. 그리고 다중 공급 전압 할당에서는 그래프 컬러링 기법을 이용해 레지스터 상의 스위칭 활동을 최소화한다. 상위 레벨 벤치마크 예제를 이용한 실험으로부터 우리는 다중 공급 전압을 이용한 제안한 알고리듬이 전력 소비를 줄이는데 효율적임을 보인다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.537-538
• /
• 2010

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권3호
• /
• pp.152-157
• /
• 2015

Various power supply noise sources in a system integrated circuit degrade the performance of a low dropout (LDO) regulator. In this paper, a capacitor-less low dropout regulator for enhanced power supply rejection is proposed to provide good power supply rejection (PSR) performance. The proposed scheme is implemented by an additional capacitor at a gate node of a pass transistor. Simulation results show that the PSR performance of the proposed LDO regulator depends on the capacitance value at the gate node of the pass transistor, that it can be maximized, and that it outperforms a conventional LDO regulator.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.233-235
• /
• 2005

Non-contact power supply (NCPS), as a clean and safe energy supply concept has been applying wildly. Comparing with the conventional transformer the non-contact transformer has a large air gap between the long primary winding and the secondary winding. Due to it, the non-contact transformer has increased leakage inductance and reduced magnetizing inductance. So the high frequency series resonant converter has been widly used on the non-contact power supply system for transferring the primary power to the secondary one, from what a high influence voltage can be gained on the secondry coil even though the large air gap exists. However, it still has the disadvantages of the load sensitive voltage gain characteristics when load is changing. In this paper, we propose a fuzzy logic controller to adjust the frequency of the inverter to track the resonat which is changing when the load is change.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.181-185
• /
• 2002

This paper gives an assessment criteria and reliability improvement for high frequency power supply of high efficacy electrodeless fluorescent lamp. The electrodeless fluorescent lamp system consist of electrodeless fluorescent lamp, high frequency power supply and lighting fixtures. The high frequency power supply has a shortest life at the system. Therefore It is need to assess the Failure Rate or Mean Time To Failure(MTTF) for the high frequency power supply of electrodeless fluorescent lamp system and improve the reliability at design. We suggest the assessment criteria and improve methods of the reliability on the design basis for the electodeless fluorescent system.

• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.57-63
• /
• 2011

Dielectric Barrier Discharge (DBD) reactor with sinsodual AC type of power supply is very widely adopted for its compact size and effective discharging mechanism to generate high density of ozone radicals. However, at the aspect of design on power supply, its optimal switching conditions and topology is achieved by empirical test. Therefore, throughout this paper, it is proposed a design method of DBD power supply to guarantee a maximum ozone yield rate in accordance with DBD reactor modification and impedance variation when rapid gas discharging in the DBD reactor is proceeded.

• 산업기술연구
• /
• 제26권B호
• /
• pp.145-155
• /
• 2006

High level of reliability in facility operation is specifically required these days. The goal of this study is to secure a methodology for reliability analysis of hydro-power plant so that an appropriate decision for operation and investment can be made. Fault tree analysis of water supply system within hydro-power plant has been performed in this study. We briefly examined the electric power generation facility and water supply system. We then developed fault tree for the water supply system based on failure modes and effects analysis. We conclude this study and provided future research areas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.819-820
• /
• 2006

This paper presents the 3D finite element analysis of contactless power supply with linear servo motor. The voltage source is used to analyze the characteristics of contactless power supply. The primary, secondary self and leakage inductances and the capacitances of a resonant circuit are calculated by the previous finite element analysis are used. Also the driving circuit to supply the power to the linear servo motor is designed. The characteristics analysis of contactless power supply considering the linear servo motor is done.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권1호
• /
• pp.29-36
• /
• 2009

Power supply noise is fundamentally caused by large current peaks. Since large current peaks are induced by simultaneous switching of many circuit elements, power supply noise can be minimized by deliberate clock scheduling which utilizes nonzero clock skew. In this paper, nonzero skew clock scheduling is used to avoid the large peak current and consequently reduce power supply noise. While previous approaches require extra characterization efforts to acquire current waveform of a circuit, we approximate it only with existing cell library information to be easily adapted to conventional design flow. A simulated annealing based algorithm is performed, and the peak current values are estimated for feasible clock schedules found by the algorithm. The clock schedule with the minimum peak current is selected for a solution. Experimental results on ISCAS89 benchmark circuits show that the proposed method can effectively reduce the peak current.

• 산업기술연구
• /
• 제27권A호
• /
• pp.157-162
• /
• 2007

This paper describes a power supply aimed at the production of plasma and its control method for a magnetron sputter in thin film coating process of PVD(Physical Vapor Deposition). Plasma load changes its impedance characteristic easily according to operating conditions and frequently produces electric arc. So. in this paper, a plasma power supply with improved output control performance in the transient state for the plasma load is presented. Also, it includes a strategy that can detect arc rapidly and reduce arc energy effectively into a load. The validity of the proposed power supply through experimentation on 20kW system was proved.