• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.569-583
• /
• 2013

In this study, the simultaneous use of a multi-level converter (MLC) as a DC-motor drive and as an active battery cell balancer is investigated. MLCs allow each battery cell in a battery pack to be independently switched on and off, thereby enabling the potential non-uniform use of battery cells. By exploiting this property and the brake regeneration phases in the drive cycle, MLCs can balance both the state of charge (SoC) and temperature differences between cells, which are two known causes of battery wear, even without reciprocating the coolant flow inside the pack. The optimal control policy (OP) that considers both battery pack temperature and SoC dynamics is studied in detail based on the assumption that information on the state of each cell, the schedule of reciprocating air flow and the future driving profile are perfectly known. Results show that OP provides significant reductions in temperature and in SoC deviations compared with the uniform use of all cells even with uni-directional coolant flow. Thus, reciprocating coolant flow is a redundant function for a MLC-based cell balancer. A specific contribution of this paper is the derivation of a state-space electro-thermal model of a battery submodule for both uni-directional and reciprocating coolant flows under the switching action of MLC, resulting in OP being derived by the solution of a convex optimization problem.

• Nuclear Engineering and Technology
• /
• v.28 no.1
• /
• pp.27-35
• /
• 1996

In this paper, an unsteady analytical model for the thermal stratification in the pressurizer surge line of PWR plant has been proposed to investigate the temperature profile, flow characteristics, and thermal stress in the pipe. In this model, the interface level, between hot and cold fluid, is assumed to be a function of time while the other models had developed for time independent or steady state. The dimensionless governing equations are solved by using a SIMPLE (Semi-Implicit Method for Pressure Linked Equations) algorithm. The analysis result for an example shows that the maximum dimensionless temperature difference is about 0.78 between hot and cold sections of pipe wall and the maximum thermal stress by thermal stratification is calculated about 276 MPa at the dimensionless time 27.0 under given conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.908-914
• /
• 2013

A shaped Cassegrain antenna is designed from the condition of the same path length at the equi-phase surface by using the conservation of energy and Snell's law. In order to improve the phase error efficiency of aperture surface, the surface profile of the main and sub-reflectors is found to satisfy the power distribution and the equi-phase condition at the aperture surface. The sidelobe levels of 36.4 dB and 33.9 dB are achieved at the AZ and EL planes, respectively from numerical calculation by physical optics method at Ku band and the directivity of designed antenna is 10 percent greater than that of conventional antenna.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.813-820
• /
• 2010

The spread mooring system for FPSO is developed to explore deep sea area, in which swell is dominant. It is known that the tension response of mooring lines in this sea area shows bimodal spectrum. Assuming normal distribution of tension profile and Rayleigh distribution of tension amplitude, the power spectral density function (PSD) of the mooring tension under the bimodal stationary random process is applied for the calculation of spectrum fatigue. Three popular methods, which are simple summation method, combined spectrum method and Jioa-Moan method, are used to combine fatigue damages from bimodal spectrum characteristics. Each damage value is compared with damage using Rainflow Cycle Counting (RCC) method which is believed to be close to exact solution. Vanmarcke' parameter and RMS(Root Mean Square) ratio are employed to assess relative damage variations between from RCC method and from three combination methods. Finally the most reliable fatigue damage combining method for spread mooring system is suggested.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.213-217
• /
• 2008

This paper describes an application of centrifugal compressor optimization system, in which the blade profile of impeller is represented with NURBS(Non-Uniform Rational B-Spline) curve. A commercial CFD(Computational Fluid Dynamics) program named NUMECA fine/turbo was used to evaluate the performance of the whole centrifugal compressor flow passage including impeller and diffuser. The whole optimization design system was integrated based on iSIGHT, a commercial integration and optimization software, which provides a direct application of some optimization algorithms. To insure the practicability of optimization, the performance of centrifugal compressor under all condition was concerned during the optimizing process. That means a compositive object function considering the aerodynamic efficiency, pressure ratio and mass flow rate under different work condition was applied by using different weight number for different conditions. Using the optimization method described in this paper, an optimized design of the impeller blade of centrifugal compressor was obtained. Comparing to the original design, optimized design has a better performance not only under the design work condition, but also the off-design work condition including near stall and near choke condition.

• Strategy21
• /
• s.37
• /
• pp.65-103
• /
• 2015

This study is an attempt to look into the future role of the ROKN and to provide a strategic way forward with a special focus on naval strategic concept and force planning. To accomplish this goal, this research takes four sequential steps for analysis: 1) assessing the role and utility of naval power of ROKN since its foundation back in 1945; 2) forecasting features of various maritime threats to influence the security of Korea in the future directly or indirectly; 3) identifying the roles to be undertaken by future ROKN; and 4) recommending Korean way of naval force planning and the operational concept of naval power. This study seeks to show that ROKN needs comprehensive role to better serve the nation with respect to national security, national prosperity and development, and future battle-space management. To safeguard the national security of Korea, it suggests three roles: 1) national guard for the peaceful unification; 2) protector of the maritime sovereignty; and 3) suppressor to maritime threats. Three more roles are highlighted for national prosperity: 1) escort of the national economy; 2) guardian for national maritime activities; and 3) contributor to the world peace. These roles need to be closely connected with the role for the battle-space management. This paper addresses the need for a dramatic shift of the central operational domain from land to maritime in the future. This will eventually offer future ROKN a leading role for developing strategic concept and force planning rather than merely a supporting one. This study finally suggests 'balanced' strategy both in concept development and force planning. A balanced force planning is a 'must' rather than an 'option' when considering a division of function between Task Fleets and Area Fleets, constructing cutting-edge conventional forces such as Aegis destroyer, CVs, or submarines, and the mix of high-profile platform and low-profile when composing future fleets. A 'balance' is also needed in operational concept. The fleet should be prepared to fulfill its missions based on two different types of force operation i.e., coercive or cooperative application of the utility of naval force. The findings and recommendations of the study are relevant today, and will be increasingly important in the future to achieve various political goals required by enhancing the utility of naval power.

• Korean Journal of Community Nutrition
• /
• v.13 no.1
• /
• pp.91-99
• /
• 2008

The present study was conducted to examine metabolic risk factors and total antioxidant capacity (TAC) of Korean females living in Seoul and to investigate the relationship between the metabolic risk factors and serum TAC. A total of 353 females aged between 20 and 64 participated in the study. Obesity indicators, blood pressure, serum lipid profile and fasting blood glucose were measured as metabolic risk factors. Ferric reducing antioxidant power (FRAP) assay was employed to determine serum TAC of subjects. Obesity indicators such as body mass index, waist circumference and waist-hip ratio were significantly higher in the participants aged $\geq$ 50 y (older group) than in the participants aged 20-49 y (younger group) (p < 0.001). Blood pressure, serum total cholesterol (TC), triglyceride (TG) and fasting blood glucose were also significantly higher in the older group than in the younger group (p < 0.001), demonstrating significant positive correlations between age and MS risk factors. The association between FRAP and MS risk factors were also investigated. FRAP values showed significant positive correlations with age (p = 0.001), serum TG (p = 0.002) and TC (p = 0.03). A tendency of positive association between FRAP and waist circumference was observed without any significant difference (p = 0.06). Increased serum FRAP with central obesity and serum lipids may be interpreted as results of activation of antioxidant defense system against oxidative stress induced by metabolic syndrome (MS) constituent factors. However, to verify the function of FRAP as a potential biomarker of susceptibility to MS various contributors to the plasma antioxidant capacity and their biological relevance related to MS should be elucidated further.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.753-758
• /
• 2018

Surface activities including CMC, surface tension, foaming power etc. of the rhamnolipid (RL), a biosurfactant fermented by microorganism were investigated. Both the RL and liquid detergent contained RL showed a good surface activity. For the detergency test, the liquid detergent with RL showed a slightly better performance than that of using an fatty acid. However for the foaming profile, the liquid detergent with RL exhibited a lot of foam volume and the suppression of the rinsing and foaming during rinsing cycles with the RL was not seen. Therefore it can be concluded that RL can be used as a main surfactant or co-surfactant in liquid detergents without functions of foaming suppression or rinse-aid.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1799-1807
• /
• 2016

In this paper, we propose the automatic demand response systems which reduce the electric power consumption for the period automatically distinct from the existing passive demand response that a subscriber directly controls the energy consumption. The proposed systems are based on SEP 2.0 and consist of the demand response management program, the demand response server, and the demand response client. The demand response program shows the current status of the electric power use to a subscriber and supports the function which the administrator enables to creates or cancels a demand response event. The demand response server transmits the demand response event received from the demand response management program to the demand response client through SEP 2.0 protocol, and it stores the metering data from the demand response client in a database. After extracting the data, such as the demand response the start time, the duration, the reduction level, the demand response client reduces the electric power consumption for the period.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.66-78
• /
• 2002

In this paper, we propose a new symbol offset estimation technique for an orthogonal frequency-division multiplexing (OFDM)-based wireless LAN. When both inter-symbol interference (ISI) and inter-channel interference (ICI) do not exist in an OFDM symbol, symbol offsets cause circular shifts in the estimated channel impulse response (CIR) by the amount of symbol offset. Also, the power delay profile of a typical multipath wireless channel can be modeled by exponentially decaying function, and most energy of multipath channel is concentrated at the beginning part of the CIR. Based on these properties, the proposed symbol offset estimation technique estimates the CIR, which is circularly shifted by the amount of symbol offset, and then calculates the partial mean power from the estimated impulse response by using a moving window with a finite length. And, symbol offset can be estimated from the index of a moving window having the maximal partial mean power. The proposed technique can reduce noise effect in the process of the CIR estimation, and remove ISI and ICI using repetitive training symbol structure in time-domain for minimum training overhead. The performances of the proposed symbol offset estimation technique in typical indoor channels are demonstrated by computer simulation.