• 전기학회논문지
• /
• 제67권4호
• /
• pp.554-560
• /
• 2018

Since Korea has a small land area, it is expected to construct the conductor return type with neutral wire in the case of ${\pm}500kV$ HVDC double bipole transmission line. Therefore, in order to apply ${\pm}500kV$ HVDC double bipole transmission line with neutral wire in Korea, it is necessary to develop technology for insulation and environmental designs. In this study, radio interference, audible noise, electric field and ion current density according to the polarity arrangement were compared and assessed in the ${\pm}500kV$ HVDC double bipole transmission line with the conductor return method. And the optimum configuration of HVDC double bipole transmission line was determined from the viewpoint of electrical environment.

• 전자공학회논문지 IE
• /
• 제44권4호
• /
• pp.30-34
• /
• 2007

전력선 통신에서는 전력을 공급하기 위해 설치된 전력선을 통신 매체로 사용하기 때문에 채널 환경이 열악하다고 할 수 있다. 본 논문에서는 원활한 통신을 위해 신호 감쇠를 저감하는 결합기를 적용한 gate 구동회로를 설계하였다. 결합기의 수신 동작과 송신 동작을 등가회로 해석하여 구동회로에 적합한 임피던스를 갖도록 설계하였다. 그 결과 전력선에 연결된 수 많은 전자 제품들의 상호 작용으로 인한 임피던스 변화에 대한 환경을 개선하여 전력선 통신에서의 BER(Bit Error Rate)을 45% 향상하여 더 원활한 통신을 할 수 있도록 하였다.

• 정보학연구
• /
• 제7권3호
• /
• pp.1-10
• /
• 2004

옥내${\cdot}$외의 전력선 환경에 대한 정확한 채널 모델링에 관한 노력이 최근에 이루어지고 있다. 알려진 일반표준, 제한과 발표된 모델들은 특별한 형태의 접근들이였다. 본 논문에서는 더 신속하고 효율적인 전력선 통신 실험을 위한 전력선 채널 모델링에 관한 연구이다. 용량성 부하 시뮬레이터는 전력선 옥내 망 모뎀 개발에 필수적인 장비이다. 총 244 경우의 용량성 부하 변화에 대한 주파수 응답 특성 측정으로 채널 모델링을 수행하였다. 본 측정 실험에서 PLC는 일반적으로 알고 있었던 특성 보다 더 확정적인 매체라는 것을 확인하였다.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.42-45
• /
• 2017

전력선통신 시스템에서는 전력망을 활용한 통신 방식을 사용하기 때문에 일반적 통신선로를 활용한 통신 방식에 비해 잡음이 많고, 이것으로 인한 성능 저하가 문제가 되고 있다. 이러한 잡음으로 인한 성능 저하를 완화시키기 위해, 본 논문에서는 전력선통신 시스템에서의 임펄스 잡음 환경에서 신호를 검출하는 인공지능 알고리즘을 제안한다. 다항식 회귀법을 이용하여 임펄스 잡음 신호의 원신호를 예측하고, 시뮬레이션 결과를 통해 본 논문에서 제안한 인공지능 알고리즘을 적용한 전력선통신 시스템에서 임펄스 잡음 환경내 신호 검출 성능 향상을 입증한다.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.85-90
• /
• 2010

In this paper the effects of a Static Synchronous Series Compensator, which is constructed with a 48-pulse inverter, on the power demand from the grid are studied. Extensive simulation studies were carried out in the MATLAB simulation environment to observe the compensation achieved by the SSSC and its effects on the line voltage, line current, phase angle and real/reactive power. The designed device is simulated in a power system which is comprised of a three phase power source, a transmission line, line inductance and load. The system parameters such as line voltage, line current, reactive power Q and real power P transmissions are observed both when the SSSC is connected to and disconnected from the power system. The motivation for modeling a SSSC from a multi-pulse inverter is to enhance the voltage waveform of the device and this is observed in the total harmonic distortion (THD) analysis performed at the end of the paper. According to the results, the power flow and phase angle can be controlled successfully by the new device through voltage injection. Finally a THD analysis is performed to see the harmonics content. The effect on the quality of the line voltage and current is acceptable according to international standards.

• 전기학회논문지
• /
• 제67권9호
• /
• pp.1125-1140
• /
• 2018

This paper analyzes robotic technology developed for live-line electricity distribution and its applicability to domestic environment. In doing so, available robotic systems developed for the live-line work are thoroughly investigated and compared in terms of from robotic functionality to economic feasibility. To assess the technology readiness for domestic live-line robot, the rubber gloves based direct live-line engineering methods have been also analyzed and mapped into robotic technology requisites. The results are expected as a fundamental data to help with solving the safety and economics issues when considering development and introduction of compact live-line robot for complex domestic electricity distribution environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.193-195
• /
• 2000

Power Line Communication(PLC) is the old technique. But it's worked in a very low spees. Developing of wireless communication technique, PLC is adopted these tech, for high speed communication. However, Power line environment differ from wireless environment. This paper survey modulation techniques and find the best modulation technique which is appropriate for power line environment.

• 정보학연구
• /
• 제8권3호
• /
• pp.25-33
• /
• 2005

This paper describe a method for measuring line impedance as a function of frequency for an energized powerline in normal operation. A small sinusoidal signal of a powerline communication utility frequency 30khz$\sim$1Mhz band is continuously injected into the line, and a implemented impedance analyzer calculates the indoor powerline channel impedance from the measured magnitude and phase of resulting voltage and current. The impedance measurement is executed over a range of frequencies to produce a wideband impedance versus frequency characteristic. Implemented impedance analyzer can analysis powerline communication environments measuring line impedance due to load caused in indoor. And measured analysis information through the database can use to evaluate performance of modem and to decide test environment standard.

• 전기학회논문지
• /
• 제67권6호
• /
• pp.773-781
• /
• 2018

In recent years, a study of power-line inspection using an unmanned aerial vehicle (UAV) has been actively conducted. However, relevant studies have been conducting power-line inspection with an UAV operated by manual control, and they have developed just power-line detection algorithm on aerial images. To overcome limitations of existing research, we propose a drone-based power-line tracking system in this paper. The main contributions of this paper are to operate developed system under configured environment and to develop a power-line detection algorithm in real-time. Developed system is composed of the power-line detection and the image-based tracking control. To detect a power-line in real-time, a region of interest (ROI) image is extracted. Furthermore, clustering algorithm is used in order to discriminate the power-line from background. Finally, the power-line is detected by using the Hough transform, and a center position and a tilt angle are estimated by using the Kalman filter to control a drone smoothly. We design a position controller and an attitude controller for image-based tracking control, and both controllers are designed based on the proportional-derivative (PD) control method. The interaction between the position controller and the attitude controller makes the drone track the power-line. Several experiments were carried out in environments where conditions are similar to actual environments, which demonstrates the superiority of the developed system.

• Journal of Information Processing Systems
• /
• 제16권2호
• /
• pp.394-405
• /
• 2020

The parameters of transmission lines have an influence on the electromagnetic environment surrounding the line. This paper proposes a method based on phasor measurement unit (PMU) and supervisory control and data acquisition (SCADA) to achieve online estimation of transmission line full parameters, such as resistance, reactance and susceptance. The proposed full parameter estimation method is compared with the traditional method of estimating resistance independently based on SCADA system. Then, the electromagnetic environment is analyzed based on the different parameter estimation methods. The example results illustrate that online estimation of transmission line full parameters is more accurate in the analysis of electromagnetic environment, which further confirms its necessity and significance in engineering application.