• 한국항공우주학회지
• /
• 제48권1호
• /
• pp.63-72
• /
• 2020

본 연구에서는 위성용 전장품 보드의 성능 요구조건과 설계 복잡도가 높아지면서 증가되는 노이즈 문제를 최소화하기 위해 전원 건전성(Power Integrity) 및 신호 건전성(Signal Integrity)의 설계 분석이 수행되었고 이를 통해 적용된 설계 개선 내용을 기술하였다. 전원 건전성은 정전류 전압강하(DC IR drop) 해석을 통해 정적 전원의 특성을 분석하였고, 각 전원의 임피던스 해석을 통해 동적 전원의 특성을 분석하여 각 분석 결과를 이용한 설계 개선 방안들이 적용되었다. 신호 건전성 측면에서는 주요 데이터버스 신호에 대한 시간영역 파형 분석과 PCB(Printed Circuit Board) 설계 수정을 통해 노이즈가 개선된 결과를 확인하였다. 또한 설계된 PCB 보드의 전원 층에 대한 공진모드를 분석하여 발생된 공진 영역들에 완화 조치를 적용하였고 조치결과를 시뮬레이션을 통해 확인하였다. 최종적으로 분석을 통해 설계 개선이 적용된 유닛에 대해 수정 전과 후의 EMC(Electro Magnetic Compatibility) RE(Radiated Emission) 노이즈 측정결과를 비교함으로써 방사성 노이즈가 감소되었음을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.27-33
• /
• 2010

We have successfully demonstrated a high-pin-count and thin embedded-LSI package to realize next generation's mobile terminals. The following three design key points were applied: (i) Using Cu posts, (ii) Using the coreless structure, (iii) Using a Cu plate as the ground plane. In order to quantitatively determine the contribution of the three points, the five-stage process for reducing the number of metal layers is described by means of the electrical simulation. The point-(i) and (ii) are effective from the viewpoint of the power integrity (PI); that is, these points play important roles in reducing the number of metal layers, and especially the point-(ii) contributes at least twice as the point-(i). The point-(iii) is not effective in the PI, but has a few effects on the signal integrity (SI). For reducing the number of metal layers, we should, at first, pay attention whether the PI characteristics fulfill the specification, and then we should confirm the SI characteristics.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.39-45
• /
• 2015

This paper deals with development of integrity evaluation instrument for the power line surge protective device. A reliable power supply is an essential element in the developed information and communication society by highly advances in IT technology. However, the lightning incidence also increased with the recent extreme weather events. In Korea, in order to protect the electrical system from lightning surge, SPD(Surge Protective Device) has been used for these past 30 years. However, the method of diagnosing the safety of the SPD in the industry is insufficient. In this paper, SPD integrity evaluation system was composed of a variable DC power source unit, voltage-current sensor and the embedded controller. In order to measure V-I characteristics of MOV, 3 type samples were degraded by impulse current generator. After impulse tests, the varistor voltage of all samples and nonlinearity coefficient were decreased. It confirmed the utility of the developed equipment by this experimental test and the reliability of SPD is expected for surge accident prevention when applied to industrial plant.

• 한국철도학회논문집
• /
• 제6권2호
• /
• pp.81-86
• /
• 2003

This study proposes the neural network simulator for the integrity evaluation of weld zone in railway rails. For these purposes, the ultrasonic signals for defects(crack) of weld zone in frames are acquired in the type of time series data and echo strength. The detection of the natural defects in railway truck is performed using the characteristics of echodynamic pattern in ultrasonic signal. And then their applications evaluated feature extraction based on the time-frequency-attractor domain(peak to peak, rise time, rise slope, fall time, fall slope, pulse duration, power spectrum, and bandwidth) and attractor characteristics (fractal dimension and attractor quadrant) etc. The constructed neural network simulator agrees fairly well with the measured results of test block(defect location, beam propagation distance, echo strength, etc). The Proposed neural network simulator in this study can be used for the integrity evaluation of weld zone in railway rails.

• 한국전자통신학회논문지
• /
• 제9권7호
• /
• pp.753-759
• /
• 2014

본 논문에서는 전원무결성(Power Source Integrity) 해석을 기반으로 PCB(Printed Circuit Board)내부 전원 선로의 RLC 공진(Resonance)현상을 해석하고 PCB내부 공진현상 감쇄를 위한 설계기법을 제시한다. 제시하는 기법은 PCB의 구조적 특성으로 형성되는 공진주파수를 예측하며, 공진현상 감쇄를 위한 디커플링 캐패시터의 적용위치 및 용량을 결정할 수 있다. 본 논문에서는 산업용 제어기 내부의 메인보드 회로 시뮬레이션 모델을 통해서 PCB 공진현상 감쇄 설계기법에 대한 타당성을 검증하였다. 본 연구결과는 향후, PCB 회로 설계에서 PDN(Power Delivery Network)구조의 안정도 향상에 기여할 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.273-280
• /
• 2007

In this paper, the ZnO surge arrester performance of power distribution class has been studied under different manufacturing conditions such as housing materials(polymeric, porcelain), interface sealants and one-body molding type. In the recent years, the polymeric ZnO surge arresters have been developed and put into operations based on their excellent characteristics. For polymeric surge arresters, the inner gas volume is extremely small, especially in solid insulation polymeric arresters there are not any gas volume inside arresters in the structure due to polymeric materials are filled into the internal gas volume. The sealing integrity is related to safe operation of surge arrester, the prime failure reason of porcelain housed arresters is moisture ingress. In this paper, the sealing integrity of polymeric surge arresters is investigated with moisture multi-aging test and ingress test. The evaluation techniques are used to inspect the sealing integrity of polymeric arresters, including leakage current, surface temperature, reference voltage and dissipation factor.

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.734-742
• /
• 2005

The present study proposes the integrity evaluation model for a straight pipe with local wall thinning defect, which reflects the characteristics of training shape and loading condition in the Piping of nuclear power plant. For this purpose, a series of finite element analyses are performed under various defect geometries and loading conditions, and real pipe experiment data performed previously is employed. The model includes the effect of thinning length as well as thinning depth and width, and also it considers the combined loading effect between internal pressure and bending moment. The proposed model has been validated using the results of finite element analysis and pipe experiment data. The results indicate that the proposed model provides more reliable predictions of pipe failure than the current existing model, in terms of accuracy, consistency, and conservativeness of results.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 학술발표대회 논문집 제19권 2호
• /
• pp.239-242
• /
• 2000

In the present study, the influence of car body structures to the noise and vibration characteristics has been sought. The numerical modal analysis for the body-in-white is employed to predict the vibratory response of structure, and then followed by the experimental modal testing to confirm the validity of the model. Using the results of numerical simulations with the designated modal parameters, the optimal structural configuration has been deduced. Special interests have been paid to the sensitivity of sound quality to the structural integrity. Since the structural integrity has a close relationship to the structure-born noise, the substantially low frequency range, which is far below the frequency range almost barely sensible by human auditory organ but still quite influential to overall impression, is especially examined. The subjective assessment agrees with the objective evaluation by means of traditional sound measures as well as psychoacoustic metrics.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.94-100
• /
• 1999

Micro-EDM is widely used in machining of miro-parts such as micro-shafts and micro-holes. In order to select proper machining conditions and to reduce the machining time, it is necessary to understand machining characteristics under various machining conditions. Micro-hole machining tests were performed with round shape electrodes with different capacitances and voltages of the power source. The effects of the electrode rotational speed and diameter on the machining rate were also observed. From the experimental results, it was found that capacitance and voltage have significant effects on machining rate and the machined surface integrity. With higher capacitance and higher voltage, higher machining rate was observed together with poorer surface integrity. The electrode diameter was also found to have an effect on the machining rate and electrode wear.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.7-10
• /
• 1998

The pump safety related to the functions in nuclear power plants must be designed to meet load conditions considering seismic requirements. In order to satisfy both structural integrity and operability of these pumps, the initial step in the seismic qualification is to establish the resonant frequencies of the structure. Applications are made to the design of the vertical and horizontal type pump. Computational results are analyzed with respect to the dynamic characteristics and are compared to the expected design requirements.