• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.141-148
• /
• 2012

The power system of leisure ship has a character of stand-alone type, so it continuously checks the usable power. Especially, the leisure ship using renewable energy needs to adjust the power consumption of loads according to the usable power. Also, the important loads of leisure ship are different by operation mode. However, current power management system doesnot consider such character. This paper studied load management system of the SPMS(Smart Power Management System) and composed using the smart plug. The SPMS controls the loads depending on a user's pattern and character through variable priority number control. This control algorithm was verified through simulation of assumed user and situation using LabVIEW.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.200-204
• /
• 2007

The release of IEEE 802.15.4 PHY-MAC standard represents a milestone in developing of commercial wireless sensor network pursuing low power and low cost. In this paper, IEEE 802.15.4 Medium Access Control (MAC) protocol was analysed at the point of power consumption. This analysis measured the amount of the rest of power after transmitting data with beacon enabled mode and the power consumption of each node in the time period. ns-2 simulation is used to verify the analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.605-612
• /
• 2017

One of the biggest environmental issues that our world has been facing is climate change. In order to cope with such environmental issues, the world is putting a great deal of effort into energy conservation. The building sector, in particular, consumes 36% of the energy consumed worldwide and emits considerable amount of greenhouse gases. Therefore, introduction of renewable energies in the building sector is highly recommended. Renewable energy sources that can be utilized in the building sector include sunlight, solar heat, geothermal heat, fuel cells and wind power. The wind power generation system which converts wind energy into electrical energy has advantages in that wind is an unlimited and pollution-free resource. It is suitable to be connected to existing buildings because many years of operational experience and the enhanced stability of the system have made it possible to downsize the electrical generator. In case of existing buildings, it is necessary to consider the live loads of the buildings to connect the wind power generation system. This paper, through the connection of the wind power generation with existing buildings, promotes reduction of greenhouse gas emissions and energy independence by reducing energy consumption in the building sector. In order to connect the wind power generation system with an exciting building, the live load of the building and the area of the rooftop should be considered. The installable model is selected by comparing the live load of the building and the load of the wind power generation system. The maximum number of the wind turbines that can be installed is obtained by considering the separation distance between the wind turbines within the area of the rooftop. Installations are divided into single installations and multiple installations of two different types of wind turbines. After determining the maximum installable number, the optimal model that can achieve the maximum annual power generation will be selected by comparing the respective total annual amount of the power generation of different models.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1623-1628
• /
• 2015

As the performance of mobile devices has increased, high-end multicore CPUs have become the norm in smartphones. However, such high performance devices are exposed to the problem of battery depletion due to the energy consumption caused by software performance, and despite increases in battery capacity. The required resources are dynamic and varied, and further user interaction is highly random; thus, Linux-based power management such as DVFS is needed to fulfill requirements. In order to reduce power consumption, we propose a method to restrict the CPU frequency of data download while maintaining user reactivity. This can supplement the weakness of existing Linux-based power management techniques like DVFS in relation to webpage loading. Through the implementation of our method at the application level, we confirm that energy consumption from webpage loading is reduced.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.55-62
• /
• 2007

Uptime of embedded processors for mobile devices are dependent on battery consumption. Especially the large portion of power consumption is known to be due to cache management in embedded processors. This paper proposes an energy efficient data cache structure for high performance embedded processors. High performance prefetching data cache issues prefetching instructions before issuing demand-fetch instructions based on reference predictions. These prefetching instruction bring reduction on memory delay by improving cache hit ratio, but on the other hand those increase energy consumption in proportion to the number of prefetching instructions. In this paper, we adopt tag history table on prefetching data cache for reducing energy consumption by minimizing parallel tag comparison. Experimental results show the proposed data cache improves performance on energy consumption as well as memory delay.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.247-253
• /
• 2011

In this paper, we propose and implement the automated brightness control system using distance measuring sensor for reducing the power consumption of emotional lighting device. In order to reduce the power consumption of emotional lighting devices which express continuous color changes, the proposed device measures the distance continuously using ultrasonic sensor and by using this, it also performs PWM Dimming control. The lighting device is composed of micro controller, LED driver, ultrasonic sensor, communication module and so on. And the device performs the real time brightness control by adapting the measured distance information from ultrasonic sensor to PWM signals. From this experiment, we implement the active lighting system which minimizes unnecessary power consumption during user's absence by adapting existing energy reducing techniques.

• Journal of Radiation Protection and Research
• /
• v.33 no.4
• /
• pp.183-196
• /
• 2008

The internal dose by food consumption mostly accounts for radiological dose of public around nuclear power plants (NPPs). But, food consumption rates applied to off-site dose calculation in Korea which are the result of field investigation around Kori NPP by the KAERI (Korea Atomic Energy Research Institute) in 1988, are not able to reflect the latest dietary characteristics of Korean. The food consumption rates to be used for radiological dose assessment in Korea are based on the maximum individual of US NRC (Nuclear Regulatory Commssion) Regulatory Guide 1.109. However, the representative individual of the critical group is considered in the recent ICRP (International Commission on Radiological Protection) recommendation and European nations' practice. Therefore, the study on the re-establishment of the food consumption rates for individual around nuclear power plant sites in Korea was carried out to reflect on the recent change of the Korean dietary characteristics and to apply the representative individual of critical group to domestic regulations. The Ministry of Health and Welfare Affairs has investigated the food and nutrition of nations every 3 years based on the Law of National Health Improvement. The statistical data such as mean, standard deviation, various percentile values about food consumption rates to be used for the representative individual of the critical group were analyzed by using the raw data of the national food consumption survey in $2001{\sim}2002$. Also, the food consumption rates for maximum individual are re-estimated.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.33-41
• /
• 2014

Heliostat field in a tower type solar thermal power plant is the sun tracking mirror system which affects the overall efficiency of solar thermal power plant most significantly while consumes a large amount of energy to operate it. Thus optimal operation of it is very crucial for maximizing the energy collection and, at the same time, for minimizing the operating cost. Heliostat field operational algorithm is the logics to control the heliostat field efficiently so as to optimize the heliostat field optical efficiency and to protect the system from damage as well as to reduce the energy consumption required to operate the field. This work presents the heliostat field operational algorithm developed for the heliostat field of 200kW solar thermal power plant built in Daegu, Korea. We first review the structure of heliostat field control system proposed in the previous work to provide the conceptual framework of how the algorithm developed in this work could be implemented. Then the methodologies to operate the heliostat field properly and efficiently, by defining and explaining the various operation modes, are discussed. A simulation, showing the heat flux distribution collected by the heliostat field at the receiver, is used to show the usefulness of proposed heliostat field operational algorithm.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1274-1275
• /
• 2011

This paper study effects that measured hamony occurence and changes of current and voltage according to variation of temperature of Far Infrared Ray Radiant Oven's room affect power quality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.927-930
• /
• 2012

The sensor network technology for core technology of ubiquitous computing is in the spotlight recently, the research on ubiquitous sensor network is proceeding actively which is composed many different sensor node. One of the important condition for design of sensor node is to extend for network life which is to minimize power-consumption under the limited resources of sensor network. This study suggest routing protocol that was used second level cluster structure to reduce power-consumption of sensor node. the first level use the previous routing protocol under the LEACH, second level decide to transmit or not by comparision of data value for Effective Usage, reduce the unnecessary power-consumption.