• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.189-190
• /
• 2020

The importance of indoor air quality management has recently been highlighted due to environmental problems such as indoor air pollution. Among indoor air pollutants, carbon dioxide occurs in cooking, heating, burning, and causes forgetfulness, dementia and amnesia. Radon, which occurs in building materials, soil and ground, is a type 1 carcinogen that causes lung cancer in the body through breathing. These substances can be released from the room through ventilation, but there is a limit to reducing the amount of indoor activity due to reduced ventilation conditions due to increased indoor activity time. However, these substances can be removed from the gas by adsorption. The purpose of this study was to identify the properties of granular active and powdered active white soil and mix them to make cement-based active white soil adsorbent matrix for carbon dioxide, fine dust and radon gas adsorption, and to evaluate indoor air improvements according to the mixing scale. The results of the experiment showed that active carbon dioxide adsorption performance increased for carbon dioxide and radon as the exchange rate increased through physical adsorption. In particular, the higher the replacement rate of the granular active bag, the better adsorption performance was shown.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.4112-4112
• /
• 2001

The feasibility of NIR spectroscopy as a quick and nondestructive method for quality control of uniformity of coating thickness of pharmaceutical tablets was investigated. Near infrared spectra of a set of pharmaceutical tablets with varying coating thickness were measured with a diffuse reflectance fiber optic probe connected to a Broker IFS 28/N FT-NIR spectrometer. The challenging issues encountered in this study included: 1. The similarity of the formulation of the core and coating materials, 2. The lack of sufficient calibration samples and 3. The non-linear relationship between the NIR spectral intensity and coating: thickness. A peak at 7184 $cm^{-1}$ was identified that differed for the coating material and the core material when M spectra were collected at 2 $cm^{-1}$ resolution (0.4 nm at 7184 $cm^{-1}$). The study showed that the coating thickness can be analyzed by polynomial fitting of the peak area of the selected peak, while least squares calibration of the same data failed due to the lack of availability of sufficient calibration samples. Samples of coal powder and solid pieces of coal were analyzed by FT-NIR diffuse reflectance spectroscopy with the goal of predicting their ash content, percentage of volatile components, and energy content. The measurements were performed on a Broker Vector 22N spectrometer with a fiber optic probe. A partial least squares model was constructed for each of the parameters of interest for solid and powdered sample forms separately. Calibration models varied in size from 4 to 10 PLS ranks. Correlation coefficients for these models ranged from 86.6 to 95.0%, with root-mean-square errors of cross validation comparable to the corresponding reference measurement methods. The use of FT-NIR diffuse reflectance measurement techniques was found to be a significant improvement over existing measurement methodologies in terms of speed and ease of use, while maintaining the desired accuracy for all parameters and sample forms.(Figure Omitted).

• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.154-161
• /
• 1998

The effects of melting temperature and holding time on the critical current density($J_c$) of $YBa_2Cu_3O_x$ based superconducting bulk fabricated by MPMG process were investigated. The amount of the formed $Y_2BaCuO_5$ phases increased with the melting temperature. However, the value of critical current density was highest at 1120 $^{\circ}C$. With this proper melting temperature, the effect of holding time on the critical characteristics was also investigated. In the case of Ag addition, the volume of the formed $Y_2BaCuO_5$ phase when the amount of Ag addition was 10 wt% and 20 wt% was observed to be highest at 20 minute and 40 minute respectively. But in the specimen without Ag, volume of $Y_2BaCuO_5$ phase increased as the holding time increased. The proper melting temperature and the holding time obtained were 1120 $^{\circ}C$ and 20 minute. The long holding time was not effective for the $J_c$ improvement as well as the formation of $Y_2BaCuO_5$.

• 셀메드
• /
• 제2권1호
• /
• pp.11.1-11.7
• /
• 2012

Stachys tibetica Vatke (Lamiaceae) is an important medicinal plant in the folk medicine of Ladakh, India and Tibet for the treatment of various mental disorders. Infusion and decoction of the whole plant is used as a cup of tea for a severe fever, headaches and to relieve tension. The recent study is aimed to evaluate the preliminary pharmacognostical and phytochemical nature of Stachys tibetica Vatke. The whole plant material was subjected to successive soxhlet extraction with petroleum ether (40 - $60^{\circ}C$), chloroform, ethyl acetate, methanol and finally decocted with water to get the respective extracts. The fluorescence characteristics of the powdered materials were analysed under ultraviolet light and ordinary light. Different physicochemical parameters such as ash value, extractive value, foaming index, pH values, loss on drying and determination of foreign matter were carried out as per WHO guidelines. The total fat, flavonoid, saponin and volatile contents were also determined. Macroscopical studies revealed the authentication of the plant drug. Physicochemical parameters helped to standardize the plant material while preliminary qualitative chemical tests of different extracts showed the presence of Glycosides, Carbohydrates, Phytosterols/triterpenoids, Saponins, Fixed oils, Fats and phenols/tannins. Quantification of the total flavonoids and saponins and contents were determined as $54.66{\pm}0.58mg/g$ and $75.42{\pm}0.48mg/kg$ respectively, while the volatile and fat contents were 6.5% and 0.7% respectively. Results may lay the foundation for the standardization of the drug and discovery of new molecules from S. tibetica for the treatment of various diseases.

• 동의생리병리학회지
• /
• 제35권5호
• /
• pp.169-176
• /
• 2021

This study was conducted to suggest the Cudrania tricuspidata leaf and Achyranthes japonica Nakai Complex (CAC) possibility of use as a functional natural material for improving bone disease. Cudrania tricuspidata leaf and Achyranthes japonica Nakai were mixed in the same amount, extracted with hot water, and then powdered and used in the study. After, the cytotoxicity of CAC for osteoblasts (MG63 cell), osteoclasts (differentiated RAW264.7 cell), and macrophages (RAW264.7 cell) were evaluated by MTT assay, and ALP assay and TRAP assay were performed to confirm the differentiation capacity of osteoblasts and osteoclasts, respectively. In addition, the anti-inflammatory effect in macrophages was evaluated by ELISA, qRT-PCR, and western blot assay. CAC did not proliferated osteoblasts and osteoclasts, but increased ALP activity against osteoblasts differentiation and decreased TRAP activity against osteoclasts differentiation. CAC did not proliferated macrophages but decreased nitric oxide production. Also, decreased NOS2, IL1B, IL6, PTGS2, and TNFA gene expression, and JNK and p38 protein phosphorylation in a concentration-dependent manner, but ERK protein phosphorylation was not changed. As a result, CAC increased the differentiation and activation of osteoblasts, inhibited the differentiation and activation of osteoclasts, and regulated the expression of inflammatory cytokines in macrophages. Therefore, it is thought that CAC can be used as a functional natural material that prevents bone disease and has an anti-inflammatory effect.

• 보존과학회지
• /
• 제36권5호
• /
• pp.306-314
• /
• 2020

도자기 복원에 사용되는 합성수지는 노화 현상과 유물 손상 가능성 등의 이유로 새로운 재료 및 복원 방식 연구의 필요성이 나타났다. 본 연구에서는 최근 연구되고 있는 3차원 디지털 기술을 활용한 복원 방식에 추가로 풀 컬러 3D 프린터를 접목하여 색상 정보를 지닌 결실 부를 출력하고자 하였다. 물성 실험을 통해 물성을 알아보고, 백자발과 분청사기접시를 대상으로 결실부를 출력하여 색도 및 광택도를 비교하였다. 실험 결과, 출력물은 기존 복원 재료와 인장강도는 유사했으며 압축강도는 약 1.4~2배 높게 측정되었다. NIST에 의한 색차 값 평가표에 의하면, 백자발은 ΔE^*ab 1.55로 눈에 띄는 정도, 분청사기접시는 3.34로 감지할 정도로 나타났다. 프린터의 한계로 정확한 색상 표현은 불가능하였지만 비접촉식 방식으로 손상 가능성을 최소화할 수 있었다. 손상 가능성이 높은 대상물에 적용하거나 결실부의 의도적인 색상 구별을 통해 전시효과의 목적 등으로 활용이 가능할 것으로 판단된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권3호
• /
• pp.111-115
• /
• 2014

Purpose: This study evaluated powdered burn wound dressing materials from wild silkworm fibroin in an animal model. Methods: Fifteen rats were used in this experiment. Full-thickness $2{\times}2cm$ burn wounds were created on the back of rats under anesthesia. In the two experimental groups, the wounds were treated with two different dressing materials made from silkworm fibroin. In the Control Group, natural healing without any dressing material was set as control. The wound surface area was measured at five days, seven days and 14 days. Wound healing was evaluated by histologic analysis. Results: By gross observation, there were no infections or severe inflammations through 14 days post-injury. The differences among groups were statistically significant at seven days and 14 days, postoperatively (P<0.037 and 0.001, respectively). By post hoc test, the defect size was significantly smaller in experimental Group 1 compared with the Control Group and experimental Group 2 at seven days postoperatively (P=0.022 and 0.029, respectively). The difference between Group 1 and Group 2 was statistically significant at 14 days postoperatively (P<0.001). Group 1 and control also differed significantly (P=0.002). Group 1 showed a smaller residual scar than the Control Group and Group 2 at 14 days post-injury. Histologic analysis showed more re-epithelization in Groups 1 and 2 than in the Control Groups. Conclusion: Burn wound healing was accelerated with silk fibroin spun by wild silkworm Antheraea pernyi. There was no atypical inflammation with silk dressing materials. In conclusion, silk dressing materials can be used for treatment of burn wound.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.369-369
• /
• 2017

To improve the reclaimed land soil, we put organic materials (Chopped kenaf, decomposed rice hull, rice straw, pellet type manure compost) into reclaimed land for 3,000 kg per 10a. As a result, EC of reclaimed soil was lowered by 58% ($1.2dS/m{\rightarrow}0.5$), content of soil organic material was risen from 6.7 g/kg to 16.0 (1.4 fold ${\uparrow}$), porosity of soil was elevated from 1.57 % to 1.31 (16.6% ${\downarrow}$), soil hardness was reduced from 20.2 mm to 17.9 (11.4% ${\downarrow}$) and plow layer soil was deepen from 19.8 cm to 26.8 (35% ${\uparrow}$). In the wake of physiochemical improvement of reclaimed soil, the growth phase of crops became better contrast to non-treatment. For example the plant height of Kenaf (Hibiscus cannabinus L.) cultivated in reclaimed land containing organic materials was lengthen by 18.8%. Especially, the improvment effect of pellet type manure compost and rice straw was more preferable. When the kenaf was cultivated in reclaimed land containing organic materials, the yield was become higher. The average yield of organic materials treatment was 9,218 kg/10a, and it was 2.1 times higher than non-treatment (4,368kg/10a). And the effective treatments to increase yields were pellet type manure compost (10,848 kg/10a, 148% ${\uparrow}$), rice straw (120% ${\uparrow}$) and chopped kenaf (95% ${\uparrow}$). To intensify the effect of physicochemical enhancement of reclaimed land soil and improving yields, we put into various physical types of organic materials (pellet type, liquid type, powdered type). The most effective organic materials type for enhancement of physicochemical properties (EC of reclaimed soil was lowered, content of soil organic material was risen, porosity of soil was elevated, soil hardness was reduced, plow layer soil was deepen) was pellet. And source to maintain better growth phase and get more yield were liquid and pellet types. When we used pellet type organic material, the plant height of kenaf was lengthen by 41% in comparison with non-treatment and yield was more than 122% more. And also liquid type could get more yield (by 127%) and growth phase (by 38%)

• 한국식품조리과학회지
• /
• 제11권5호
• /
• pp.487-493
• /
• 1995

김치 담금시 재료의 배합비와 숙성시 특성 측정을 위해 서울과 충청도에서 조사된 김장김치의 종류는 배추김치, 깍두기, 총각김치, 나박김치, 동치미, 보쌈김치, 백김치 등이었고 이 중 배추김치담금에 사용하는 주, 부재료는 약 20-25종류였으며 젓갈 및 어패류 의 사용이 많았다. 배합비는 배추 71.9%$\pm$7.7, 무채 11%, 파 2.3-2.6%, 마늘 1.3-1.6%, 고추가루 2.7-3.2% 그리고 젓갈 3.9~4.2% 등이었다. 봄김치는 배추김치, 깍두기, 총각김치와 열무김치, 오이김치 등을 담았으며 배추김치에 김장김치의 갓 및 굴, 새우 등 어패류 대신에 부추, 생홍고추, 양파 등 신선한 계절야채르르 많이 사용하였다. 양념류는 김장김치에 비해 젓갈은 다소 적고 그 외 사용비는 비슷하였으며 나박김치, 열무김치 등 국물김치에서 건더기와 물의 비는 약 40:48을 이루었다. 또한 배추김치의 최적 숙성은 pH 4.2~4.5, 총산도 0.5~0.8% lactic acid 범위였고 선호하는 염도는 김장김치류 2.3~2.74%, 봄김치류 1.8~2.4% 범위였으며 국물김치는 1.3~1.7%의 낮은 염도를 보였다.

• 대한환경공학회지
• /
• 제28권6호
• /
• pp.648-653
• /
• 2006

기존 바이오필터 기술의 문제점인 불안정한 VOCs 제거효율을 개선하기 위하여 미생물을 고분자물질에 고정화시킨 새로운 담체를 개발하였으며, styrene을 대상으로 개발된 담체의 특성을 실험적으로 조사하였다. 복합고분자담체는 천연고분자물질인 alginate와 인공고분자물질인 polyvinyl alcohol(PVA) 혼합액에 분말활성탄과 고농도 미생물 배양액을 배합하여 3 mm 크기의 구형으로 제조하였다. 회부실험 결과 제조된 복합고분자담체는 활성탄의 흡착능력이나 미생물의 생분해속도의 감소 없이 대상 VOC인 styrene을 빠른 속도로 저감할 수 있었다. 복합고분자담체를 적용한 바이오필터 장기운전 실험에서는 유입부하량 $245g/m^3/hr$에서도 95% 이상의 styrene 분해능을 나타내어, 문헌에 제시된 기존 바이오필터의 styrene 최대분해능을 초과하였다. 오염물질이 고농도로 단기간 유입되는 조건에서도 고정화된 활성미생물에 의한 생분해반응과 함께 담체에 첨가된 분말활성탄의 흡착반응에 의해 오염물질이 효과적으로 제어되었으며, 오염물질 유입농도가 낮아진 후에 활성탄에 흡착된 styrene이 미생물에 의해 분해됨을 확인하였다. 결과적으로 활성탄과 미생물을 고분자물질로 고정화하여, 활성탄의 단점(장기간 사용하기 위해서는 재생이 필요)과 미생물반응의 단점(변동부하에 처리효율이 낮음)을 동시에 최소화시켰으며, 생물학적 VOCs 저감효과를 극대화시킬 수 있었다.