• 한국항만학회지
• /
• 제14권3호
• /
• pp.373-378
• /
• 2000

Oil spill in sea water is the most frequent and significant problem of marine pollution. As an early detection sensor of the pollution, an activated carbon coated quartz crystal is prepared and examined for its performance of detection sensitivity and stability. Powdered activated carbon and phenol resin is coated on the surface of the sensor and the sensor is baked for an hour. Adsorption of acetone dissolved in water and salt water is measured using frequency shift of quartz crystal at different concentrations of solute material. The outcome indicates that the sensor preparation is adequate and the measurement of solute concentration is stable and sensitive enough to be implemented on the monitoring of solute concentration is stable and sensitive enough to be implemented in the monitoring of organic pollution of sea water.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.275-276
• /
• 2000

• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.477-493
• /
• 2016

Immediate use of activated carbon incorporated polysulfone membrane application for dye separation was reported in this work. Dimethylformamide (DMF) was used as the solvent for the membrane preparation. The membrane thus prepared were characterized in terms of surface morphology, ATR-FTIR, AFM, experimental results as membrane performance. The resultant nanofiltration (NF) membranes were tested with Congo red dye concentration 200 mg/L. The water permeability was found to be considerably higher than that reported in literature. Experimental results show that the real rejection of the Congo red is 99.57% over the transmembrane pressure 100 psi using 30% activated carbon incorporated membrane. Prepared NF membranes shows the corresponding permeates fluxes were $40Lm^{-2}h^{-1}$ to $82Lm^{-2}h^{-1}$ with different activated carbon percentage incorporated in polysulfone membrane. The present study demonstrated that dye rejection enhanced NF may be a feasible method for the dye wastewater treatment. The overall observations thus indicated that toxic residual dyes can be appreciably separated from the membrane technology, provided that the accompanying polymeric membrane, activated carbon as binding agents and the process parameter levels are astutely selected.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.311-316
• /
• 2008

This study aimed to obtain equilibrium concentration on adsorption removal of ammonia nitrogen by activated carbon, to express the adsorption characteristics following Freundlich isotherm and also, based on the value obtained, to investigate the relationship between physical characteristics of activated carbon and dynamics of ammonia nitrogen removal by obtaining rate constant and effective pore diffusivity. The results summarized from this study are as follows. It was noted that powdered activated carbon showed better adsorption ability than granular activated carbon. The value of constant (f) of Freundlich isotherm of powered activated carbon was $4.6{\times}10^{-8}$ which is bigger than that of granular activated carbon. The adsorption rate constant on ammonia nitrogen of powered activated carbon with high porosity and low effective diameter was highest as 0.416 hr-1 and the effective pore diffusivity ($D_e$) was lowest as $1.17{\times}10^{-6}cm^2/hr$, and the value of ammonia nitrogen adsorption rate constant of granular activated carbon was $0.149{\sim}0.195hr^{-1}$. It was revealed that, with the same amount of dosage, the adsorptive power of activated carbon with lower effective diameter and bigger porosity was better and its rate constant was also high. With a little adsorbent dosage of 2 g, there was no difference removal ability of ammonia nitrogen as change of adsorption properties.

• 상하수도학회지
• /
• 제21권3호
• /
• pp.341-348
• /
• 2007

The efficiency of powdered activated carbon (PAC) for removing taste and odor (T&O) in drinking water supplies is dependent on the contact time, quality of mixing, and the presence of competing compounds. All of these are strongly influenced by the stage in the treatment process at which the PAC is added. In conventional water treatment plants (WTPs), PAC is commonly added into the rapid mixing basin where chemicals such as coagulants, alkaline chemicals, and chlorine, are simultaneously applied. In order to prevent interference between PAC and other water treatment chemicals, alternative locations for addition of PAC, such as at transmission pipe in the water intake tower or into a separated PAC contactor, were investigated. Whatever the location, addition of PAC apart from other water treatment chemicals was more effective for geosmin removal than simultaneous addition. Among several combinations, the sequence 'chlorine-PAC-coagulant' produced the best result with respect to geosmin removal efficiency. Consequently, when PAC has to be applied to cope with T&O problems in conventional WTPs, it is very important to prevent interference with other water treatment chemicals, such as chlorine and coagulant. Adequate contact time should also be given for adsorption of the T&O compounds onto the PAC. To satisfy these conditions, installation of a separated PAC contactor would be the superior alternative if there is space available in the WTP. If necessary, PAC could be added at transmission pipe in the water intake tower and still provide some benefit for T&O treatment.

• 한국습지학회지
• /
• 제14권4호
• /
• pp.629-635
• /
• 2012

본 연구는 부영양화 호소의 개선을 위하여 분말활성탄 공정을 적용하고 호소수 내의 용존 유기물과 인의 제거특성을 파악하고자 수행되었다. 용존 유기물의 제거특성은 부유물질의 제거특성과 다르며 응집제 주입량과 pH에 영향을 받음을 확인하였다. 용존 유기물은 분말활성탄에 의해 흡착으로 제거되며 응집과정에서 용존 유기물의 제거효율을 증가시킬 수 있었다. 응집침전공정의 인 제거 과정과 같은 화학침전과정에서 형성되는 용존성 착화합물과 콜로이드성 물질은 인의 제거효율을 저하시키는 요인이다. 분말활성탄의 주입으로 콜로이드성 물질과 용존성 착화합물을 흡착함으로써 인의 제거효율을 증가시킬 수 있었다. 또한 분말활성탄은 응집과정의 floc의 밀도를 증가시켜 침전속도를 높이고 고액분리 효율을 높일 수 있었다.

• 한국물환경학회지
• /
• 제37권6호
• /
• pp.483-492
• /
• 2021

This study evaluated the removal efficiencies of methylene blue (MB) and humic acids (HA) using a rice husk (RH) biochar and powdered activated carbon (PAC). The pseudo-second-order model better presented the adsorption of MB and HA onto a RH biochar than the pseudo-first-order model. Furthermore, better description of the adsorption behavior of MB and HA by the Langmuir isotherm model (R² of the RH biochar: MB = 0.986 and HA = 0.984; R² of PAC: MB = 0.997 and HA = 0.989) than the Freundlich isotherm model (R² of the RH biochar: MB = 0.955 and HA = 0.965; R² of PAC: MB = 0.982 and HA = 0.973) supports the assumption that monolayer adsorption played key roles in the removal of MB and HA using the RH biochar and PAC. Batch experiments were performed on the effects of dosage, temperature, and pH. For all experiments, PAC showed higher efficiencies than RH biochar and MB adsorption efficiencies were higher than those of HA. Adsorption efficiencies increased with increasing amounts of adsorbents and temperature. As the pH increased, adsorption efficiencies of MB were increased while adsorption efficiencies of HA were decreased.

• 대한환경공학회지
• /
• 제35권11호
• /
• pp.815-820
• /
• 2013

본 연구의 목적은 알루미늄판에 활성탄을 얇게 박판으로 코팅하여 분진제거를 위한 활성탄 전극을 제조함에 있다. 전극을 제조하기위하여 알루미늄판에 활성탄을 부착시키기 위한 적정 결합제 선정 그리고 결합제 사용에 따른 활성탄 세공의 막힘방지 그리고 제조된 제극의 분진제거능력 등을 알아보는 연구를 수행하였다. 알루미늄판에 활성탄 부착을 위한 결합제로는 비닐계의 PVA (polyvinyl acetate)가 적정하였고, 결합제 사용에 따른 활성탄 세공의 막힘을 방지하기 위해서는 우선 먼저 활성탄 세공에 결합제의 용매제를 충진하고 나중에 결합제와 활성탄을 혼합 후 고온에서 휘발시키는 방법이 적정하였다. 그리고 활성탄이 코팅된 전극판은 알루미늄 전극판보다 약 두배의 분진부착능력을 보여주었다.

• 상하수도학회지
• /
• 제14권4호
• /
• pp.350-355
• /
• 2000

Powdered activated carbon(PAC) is widely used to control 2-MIB와 geosmin causing earthy-musty odor in water supplies. It was known that chlorine is one of the chemicals often come into contact with activated carbon. But activated carbon react with chlorine and surface oxide accumulate on carbon surface. As result, adsorption capacity of activated carbon is reduced. To investigate the effect of chlorine on the PAC's ability to adsorb 2-MIB and Geosmin, a series of experiments was carried out to show (1) the effect of aqueous chlorine doses on the ability of PAC to adsorb 2-MIB and Geosmin from Lake Heodong water. (2) the effect of delaying the chlorine addition after PAC had been added (to simulate the effect of using an alternative point of chlorine addition). As a result of experiment, as chlorine dose increased correspondingly decreased the capacity of activated carbon to adsorb 2-MIB and geosmin. Even though previously adsorbed 2-MIB and geosmin released, as result of the application of delaying the chlorine adding was more beneficial than simultaneous adding chlorine with PAC.

• 상하수도학회지
• /
• 제21권2호
• /
• pp.195-201
• /
• 2007

A submerged flat-sheet membrane separation system integrated with PAC (powdered activated carbon) was used in this research in order to investigate the effects of PAC on the efficiencies of operation and treatment and to evaluate the performance of the system. The experiments were carried out under operating conditions of a filtration rate of 0.38 m/d, water temperature of $20-28^{\circ}C$, and PAC dose of 0 g/L (Run-A) and 20 g/L (Run-B). The influent concentrations of TOC (total organic carbon), $NH_4{^+}-N$ (ammonia nitrogen) and $UV_{254}$ (UV absorbance at 254 nm) were 2.48 mg/L, 1.4 mg/L and 2.53 1/m, respectively. TOC removal of 43.2 and 73.6%, ammonia nitrogen removal of 4.9 and 15.9%, and $UV_{254}$ removal of 20.6 and 31.6% were obtained for Run-A and Run-B, respectively. During an experimental period of 33 days, no change was found in TMP (Run-B), but the TMP in Run-A increased by 5 kPa after 29 days. This research showed that the filtrate quality and the performance efficiency were enhanced when PAC was introduced into the filtration system.