• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.626-635
• /
• 2008

The purpose principal objective of this study was to develop a muffin with the addition of jinuni bean powder. The whole Our analysis was conducted by using using Design Expert 7(Stat - Easy Co. Minneapolis). The jinuni bean muffin was produced by varying the contents of jinuni bean powder(A), sugar(B), and butter(C). According to the Response Surface Methodology(RSM), it showed we delineated 16 experimental points, including two replicants. The optimization We attempted to optimize of the jinuni bean muffins was studied with regard to its analysis of rheology and sensory evaluations. As a result of the redness, hardness, and sensory evaluations, characteristics such as color, appearance, flavor, softness, and overall quality showed a varied in accordance with a quadratic model, whereas lightness, yellowness, and cohesiveness, and gumminess showed evidenced a linear model pattern. Lightness, and yellowness decreased with the increases in the of jinuni bean powder content(p<0.0001), while whereas redness increased with the increases of in the content of jinuni bean powder(p<0.001), in case of over 80g, the redness tended to increase decrease again. In addition, hardness(p<0.05), gumminess(p<0.05), and cohesiveness(p<0.01) showed differed significantly differences with the increases of in the jinuni bean powder content. The results of our sensory evaluation results showed demonstrated significant values in color, appearance, flavor, softness,and overall quality values(p<0.05). The optimal formulation, as assessed by numerical and graphical methods, were was determined to be 50.05 g of jinuni bean powder, 78.56 g of sugar, and 90.97 g of butter.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.1
• /
• pp.27-34
• /
• 2001

Refining of powder particles and their dissolution into the Al matrix during mechanical alloying(MA) were investigated by using X-ray diffraction(XRD) transmission electron microscopy (TEM) functions of alloy composition, milling time and ball to powder ratio(BPR). It is found that Ti particles less than 20nm are observed in a dark field image of mechanically alloyed Al-10wt%Ti whose XHD pattern exhibits no Ti peak. The observed change of lattice constant of AI indicates that about 1 wt%Ti can he solved in Al after MA for a long time, independent of alloy composition, milling time and BPR, suggesting that most of Ti particles arc retained in the Al matrix. It is concluded that the disappearance of XRD peaks in mechanically alloyed Al-10wt%Ti is not simply attributable to the dissolution of Ti into Al, but associated mainly with extreme refining and/or heavy straining of Ti Particles.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.318-324
• /
• 2003

The nano-scale crystallite sizes of uranium oxide powders in simulated spent fuel were measured by the neutron diffraction line broadening method in order to analyze the sintering behavior of the dry process fuel. The mixed $UO_2$ and fission product powders were dry-milled in an attritor for 30, 60, and 120 min. The diffraction patterns of the powders were obtained by using the high resolution powder diffractometer in the HANARO research reactor. Diffraction line broadening due to crystallite size was measured using various techniques such as the Stokes' deconvolution, profile fitting methods using Cauchy function, Gaussian function, and Voigt function, and the Warren-Averbach method. The non-uniform strain, stacking fault and twin probability were measured using the information from the diffraction pattern. The realistic crystallite size could be obtained after separation of the contribution from the non-uniform strain, stacking fault and twin.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.1
• /
• pp.45-52
• /
• 2000

In order to select the optimum ethanol concentration for extraction of volatile components in cinnamon, the dried cinnamon was extracted with water and 30∼90% ethanol. The volatile components of cinnamon extracts were isolated by the simultaneous distillation extraction method using Likens and Nickerson's extraction apparatus, and analyzed by GC-MS. In cinnamon bark powder 45 components were detected and 21 components were identified. The major component of cinnamon bark powder was cinnamic aldehyde. In water extract of cinnamon, volatile components were not extracted sufficiently. The volatile components of cinnamon were increased with the increment of ethanol concentraction upto 70%. The volatile component of 70% ethanol extract showed similar pattern and amount to cinnamon bark powder. But in 90% ethanol extracts, the number and amount of volatile component were reduced. The above data suggested that 70% ethanol was the most effective solvent for volatile components extraction of cinnamon.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1140-1141
• /
• 2006

Diamond tools with several layers of diamond grits through thickness direction were tested by sawing. The saw blades with evenly distributed grits showed better cutting performance compared to the random distributed saw. At a given concentration of grits, as the spacing between layers was increased, the cutting performance was improved, and as decreased, it showed more tool life

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1113-1119
• /
• 1998

Crystal structure of needle-shaped maghemite(${\gamma}$-{{{{ { {Fe }_{2 }O }_{3 } }}) has been studied by the Rieveld analysis of powder X-ray diffraction patterns. The tetragonal space group P41,.3212 and cubic space group P41,.32 have been have been used for the refinement of X-ray diffraction patterns. The crystal system of maghemite is closed to tetragonal more than cubic. The tetragonal lattice parameters are a=8.3460$\AA$ and c=25.034$\AA$ The standard X-ray diffraction pattern of the tetragonal maghemite analyzed with space group P41,.3212 is proposed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.45-58
• /
• 2011

Gravure off-set printing recently is used in electronics display market. This method has advantages of mass production and high printing speed. It is also fine pattern can be implemented. We have manufactured low-curable conductive Ag pastes for gravure off-set printing. When printing, the pastes be used different silver powder shape because of the printing characteristics. The pastes were prepared with silver powder by silver powder shape and size, epoxy resin, solvent and homogenized on a standard three-roll mill. And the pastes exhibited a shear-thinning flow at viscosity profile. Moreover the adhesive strength and resistivity of silver film had a good characteristics. With the manufactured paste in this study, touch panel had is manufactured and it had $4{\times}10-5{\Omega}.cm$.

• Advances in materials Research
• /
• v.2 no.1
• /
• pp.37-49
• /
• 2013

The transition metal salt doped solid polymer electrolyte [TSPE] were prepared with HPMC as a host polymer. The virgin and doped films were prepared by solution-casting method and investigated using wide angle X-ray scattering method. Micro structural parameters like lattice strain (g%), stacking/twin faults, the average number of unit cells counted in a direction perpendicular to the Bragg's plane (hkl) spacing of (hkl) planes dhkl, crystallite size Ds, distortion width, standard deviation were determined by whole pattern powder fitting (WPPF) method, which is an extension of single order method. It is found that the crystallite size decreases with the increase in the content of $FeCl_3$. This decrease is due to increase in localized breaking of polymer network which also accounts for the amorphous nature of the material. The filler inorganic salt $FeCl_3$ acts as plasticizer. FTIR study also confirms and justifies the interaction between the polymer and in-organic salt in the matrix. Physical properties like mechanical stability and Ac conductivity in these films are in conformity with the X-ray results.

• Journal of the Korean Ceramic Society
• /
• v.49 no.3
• /
• pp.205-215
• /
• 2012

It has been studied the crystal and block structures of the hexagonal ferrites with M, W, Y and Z types prepared by various coprecipitation-oxidation method. The structures have been refined with a Rietveld analysis of the powder X-ray diffraction pattern with high precision ($R_{WP}$ <0.09, $R_I$ <0.03). The density difference between the S-blocks was proportioned to the cobalt contents in hexagonal ferrites, but that between the R or T-blocks was relatively small. Compared with the blocks and cation-oxygen polyhedra in BaM ($BaFe_{12}O_{19}$), those were bulky to the normal direction for the c-axis in $Co_2W$ ($BaCo_2Fe_{16}O_{27}$) and to the parallel direction for the c-axis in $Co_2Y$ ($Ba_2Co_2Fe_{12}O_{22}$) and $Co_2Z$ ($Ba_3Co_2Fe_{24}O_{41}$). The S-blocks of $Co_2W$, $Co_2Y$, and $Co_2Z$ were unstable and distorted. Because the T-block of $Co_2Z$ was unstable, the T-block was decomposed into the Ba-rich phase and $Co_2W$ at high temperatures above $1200^{\circ}C$. A standard powder X-ray diffraction pattern for $Co_2Z$ was proposed as well.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1199-1204
• /
• 1997

SiC conversion layer was fabricated by the chemical vapor reaction between graphite substrate and silica powder. The CVR process was carried out in nitrogen atmosphere at 175$0^{\circ}C$ and 185$0^{\circ}C$. From the reduction of silica powder with graphite substrate, the SiO vapor was created, infiltrated into the graphite substrate, then, the SiC conversion layer was formed from the vapor-solid reaction of SiO and graphite. In the XRD pattern of conversion layer, it was confirmed that 3C $\beta$-SiC phase was created at 175$0^{\circ}C$ and 185$0^{\circ}C$. Also, in the back scattered image of cross-sectional conversion layer, it was found that the conversion layer was easily formed at 185$0^{\circ}C$, the interface of graphite substrate and SiC layer was observed. It was though that the coke particle size and density of graphite substrate mainly affect the XRD pattern and microstructure of SiC conversion layer. In the oxidation test of 100$0^{\circ}C$, the SiC converted graphites exhibited good oxidation resistance compared with the unconverted graphites.