• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.261-264
• /
• 2007

In this study, the consolidation and casting processes of fine Si powders, by-products of making high purity Poly-Si rods in the current method, were systematically investigated for use as economical solar-grade feedstock. Morphology, size, and contamination type of the poly-Si fine powders were inspected by combined analysis of SEM, particle size analyzer, and FT-IR. Poly-Si powder compacts were tried to fabricate by a consolidation process without a binding agent and then their density ratio and strength were evaluated. Finally, the electrical resistivity of the specimens prepared by an electromagnetic casting method was examined for purity assessment.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.462-470
• /
• 1995

The characteristics of spray-dried granules are important for dry pressing operation since they have great influences on die-filling, compaction ratio, and resulting green microstructure. An attempt was made to control granule morphology and the packing structure of fine Si3N4 particles in granules by adjusting suspension property. Mercury porosimetry was used to characterize the pore structures of both granules and green compacts. Finally, the effects of particle packing structure in granules and green microstructure on sintering behavior were investigated.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.297.1-297.1
• /
• 2003

Organic solvent-based enteric coating technology using hydroxypropyl methylcellulose phthalate (HPMCP) has been developed for many years due to low water solubility of HPMCP. In this work, aqueous HPMCP nanoparticles (HPMCP-NPs) were prepared by neutralization emulsification method using HPMCP powder and ammonium hydroxide (NH40H) in the absence of any organic solvent and emulsifier. (omitted)

• Journal of the Korean Ceramic Society
• /
• v.22 no.1
• /
• pp.19-24
• /
• 1985

The synthetic method was studied on the $SrTiO_3$ powder of pure and homogeneous ultra fine particle of $SrTiO_3$. Pure and ultra fine particle was synthesized from $Sr(OH)_2$.$8H_2O$ and Ti(OH) at 3$0^{\circ}C$~9$0^{\circ}C$ in the $N_2$ gas atmosphere.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.339-349
• /
• 2007

For various types of the Pungchon limestone, diverse mineral characters of the limestone including their size and morphology are investigated by using of ELS and SEM to examine the possibility of application as fillers to paper industry. Also, the measurement of zeta potential and the evaluation of coagulation properties in calcite suspension was made for fine powders of the limestone to examine the applicability and efficiency in wet-papermaking process. Fine powder of the Pungchon lime-stone, largely controlled by original mineral characters of ore in mineralogical aspects, exhibits some-what different trend in particle morphology according to ore types, and thereby, the size distribution, zeta potential and coagulation properties also become different. The examined whiteness, brightness, opacity and sheet strength in hand sheet also show remarkable differences according to ore types. These are seemed to be basically due to the results of combined effects of whiteness, site distribution, refractive index, and morphology of the limestone powder on the properties of hand sheet. Considering the investigated results, all types of the Pungchon limestone appear to be sufficiently applicable to paper industry. Especially, the mega-crystalline calcite type is evaluated to be overall suitable for the purpose of paper industry due to the higher values in whiteness and brightness. In addition the fine powder of micro-crystalline calcite type is assessed particularly to have a good quality in sheet strength by virtue of irregular particle shape.

• Archives of Pharmacal Research
• /
• v.3 no.2
• /
• pp.65-74
• /
• 1980

Analysis of particle size distribution of a sample of fine aluminum hydroxide powder was carried out by four different methods, i. e., conductivity, air permeability, gas-adsorption and sedimentation. Each method was reproducible. The results obtained by Coulter counter and sedimentation balance were similar, and the data obtained by Lea and Nurse permeameter and Stroehlein areameter were also similar. But the results differ considerabley between the former and the latter. The advantages and disavantages of each method were discussed briefly and a means of comparing the results with those obtianed by surface area measurements was shown.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.109-114
• /
• 2001

In this study, the physical and dynamic characteristics of Bottom-ash produced at steam power plants were compared and considered. The comparative objects were Bottom-ash in which a lot of powder contained and that in which less than that relatively contained. The difference in quantity of powder showed different effect on the character of flow. This study was undertaken on the use of Bottom-ash as a fine aggregate, and showed the durability and the character of strength according to each rate.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.65-70
• /
• 1998

Fine powders of $\alpha$-Fe2O3 were prepared by precipitation method using iron (III) nitrate in ethanol solvent and the thick film using this powder was made by the screen printing technology. Effects of the reaction temperature and concentration of the iron (III) nitrate on the particle size and specific surface area were studied. Also, the relationship between the powder size and properties of the thick film was discussed.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.195-200
• /
• 2009

To develop a crosslinker for the polyester powder coatings, $N^1,N^1,N^4,N^4$-tetrakis(hydroxyethyl)cyclohexane-1,4-dicarboxamide (Cy-${\beta}-HAA$), incorporated with a cyclohexane ring within the main chain of commercial ${\beta}-hydroxyalkylamide$ (${\beta}-HAA$), was prepared from the amidation of dimethyl trans-1,4-cyclohexanedicarboxylate and diethanolamine in the presence of $NaOCH_3$, The structure of $Cy-{\beta}-HAA$ was confirmed by its NMR, FT-IR and ESI-MS spectra. $Cy-{\beta}-HAA$ was thermally more stable than ${\beta}-HAA$. When $Cy-{\beta}-HAA$ was used as a crosslinker for the polyester powder coatings, it provided the smooth coating surface and reduced the formation of pinholes in the coating surface with comparison with ${\beta}-HAA$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.04a
• /
• pp.43-43
• /
• 2006