• Journal of Pharmaceutical Investigation
• /
• 제17권4호
• /
• pp.197-204
• /
• 1987

Novel pranoprofen algininate and lysinate salts were manufactured and their salt formation was confirmed by melting point, infrared spectroscopy, nuclear magnetic resornance spectroscopy, differential scanning calorimetry and powder X-ray diffractometry. The physical properties of pranoprofen lysinate and argininate salts were compared with those of pranoprofen through in vitro and in vivo tests. Solubility, $pK_a$ and lipid-water partition coefficient were measured through in vitro experiments, while antiinflammatory efficacy, analgesic effect, acute toxicity and in situ absorption were tested through in vivo experiments. The results obtained were as follows: 1) The solubilities of pranoprofen argininate and lysinate salts were increased markedly in pH 6.8 and pH 7.5 phosphate buffer solutions, comparing with that of pranoprofen itself. 2) $pK_a$ values of pranoprofen, pranoprofen argininate and lysinate salts were 6.34, 7.99 and 7.56 in carbon tetrachloride, and 5.86, 6.69 and 7.92 in chloroform, respectively by liquid-liquid partition method. 3) The lipid-water partition coefficients of pranoprofen argininate and lysinate salts were increased more than that of pranoprofen in carbon tetrachloride, chloroform, or benzene-pH 6.8 buffer system, but were nearly identical using pH 1.2 buffer as water phase. 4) Antiinflammatory effects of pranoprofen argininate and lysinate salts were remarkably increased and analgesic effects of the salts were as same as that of pranoprofen. 5) Pranoprofen argininate and lysinate salts were safer than pranoprofen itself in acute toxicity, and the in situ absorption rates of pranoprofen, pranoprofen argininate and lysinate salts were 0.392, 0.960 and $0.762\;hr^{-1}$, respectively according to the rat intestine recirculation experiment.

• 분석과학
• /
• 제5권3호
• /
• pp.327-332
• /
• 1992

Mn-Zn 페라이트 단결정 성장시 일반적인 Bridgman법에서 조성변동 문제가 발생한다. 상평형도를 이용하여 원료 조성을 A, B로 분리하여 조성 B 원료를 단결정 성장 속도와 동일하게 투입함으로써 조성변동 문제를 해결하였다. 실험변수를 바탕으로 A조성을 52 mol% $Fe_2O_3$, 30 mol% MnO, 18 mol% ZnO로 선정하였고, 원하는 단결정 조성인 B 조성을 53 mol% $Fe_2O_3$, 28.5 mol% MnO, 18.5 mol% ZnO로 선정하여 직경 60mm, 길이 300mm 단결정을 성장시켰다. 성장된 단결정은 조성 B 원료 정제가 투입된 30~270mm 부위에서 조성 변도 없이 균일하게 B 조성과 비슷한 조성을 가졌으며, 이에 따라 주파수 5 MHz에서의 투자율값도 균일하게 600 근처로 높게 나타났다.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.349-358
• /
• 2000

Fabrication and Characterization of Bi$_{2}$/Sr$_{2}$/CaCu$_{2}$/O$_{8}$(Bi2212) superconductor thick films were fabricated successfully on C tapes by liquid reaction between Cu-free precursors of Bi$_{x}$/SrCaO/$_{y}$(x=1.2-2) and Cu tapes. Cu-free Bi-Sr-Ca-O powder mixtures were screen-printed on Cu tapes and heat-treated at 850-87$0^{\circ}C$ for several minutes in air oxygen nitrogen and low oxygen pressure. In order to obtain the optimum heat-treatment condition we studied the effect of the precursor composition the printing thickness and the heat-treatment atmosphere on the superconducting properties of Bi2212 films and the reaction mechanism. Microstructures and phases of thick films were analyzed by films and the reaction mechanism. Microstructures and phases of thick films were analyzed by optical microscope and XRD. The electric properties of superonducting films were examined by the four probe method. At heat-treatment temperature the thick films were in a partially molten state by liquid reaction between CuO of the oxidized copper tape and the precursors which were printed on Cu tapes. During the heat-treatment procedure Bi2212 superconducting particle nucleate and grow in preferred orientations.ons.s.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.100-109
• /
• 2015

Environmental problems from petroleum-based plastic wastes have been rapidly increasing in recent years. The alternative solution is focus on the development of environmental friendly plastic derived from renewable resource. Poly(lactic acid) (PLA) is a biodegradable polymer synthesized from biomass having potential to replace the petroleum-based non-degradable polymers utilizations. PLA can be synthesized by two methods: (1) ring-opening of lactide intermediate and (2) direct polycondensation of lactic acid processes. The latter process has advantages on high yields and high purity of polymer products, materials handling and ease of process treatments. The polymerization process of PLA synthesis has been widely studied in a laboratory scale. However, the mass scale production using direct polycondensation of lactic acid has not been reported. We have investigated the kinetics and scale-up process of direct polycondensation method to produce PLA in a pilot scale. The order of reaction is 2 and activation energy of lactic acid to lactic acid oligomers is 61.58 kJ/mol. The pre-polymer was further polymerized in a solid state polymerization (SSP) process. The synthesized PLA from both the laboratory and pilot scales show the comparable properties such as melting temperature and molecular weight. The appearance of synthesized PLA is yellow-white solid powder.

• 자원리싸이클링
• /
• 제26권3호
• /
• pp.17-25
• /
• 2017

전기로 제강분진은 고철을 전기로에서 용해하는 과정에서 발생하는 휘발성분들이 공기 중의 산소와 반응하여 산화물형태로 포집된 미세분말로써 다양한 특성을 가지고 있다. 이러한 전기로 제강분진의 효율적인 자원화를 위해서 반응속도론적 기초실험과 Pilot 규모의 생산실험을 병행하여 실시하였다. 그 결과 전기로 제강분진은 다양한 구성성분과 화합물로 구성되어 있었으며 공통적으로 Cl과 알카리 성분이 다량으로 존재함에 따라 자원화를 위한 실제 조업에 큰 악영향을 미치는 화합물의 형성이 예상된다. 휘발거동은 $1100^{\circ}C$ 영역에서 활발히 진행되고 $1250^{\circ}C$ 영역에서는 용융현상이 나타남을 확인할 수 있었다. 이러한 결과는 Pilot규모의 실증테스트의 결과로 얻은 조산화아연과 환원철의 형성거동에서도 동일한 결과를 얻었다. 이러한 결과는 전기로 제강분진의 자원화 플랜트의 설계 및 조업조건 설정에 유용한 기초자료로 활용이 기대된다.

• Journal of Magnetics
• /
• 제7권2호
• /
• pp.29-39
• /
• 2002

The initial NiCuZn synthetic ferrite were acquired from thermally decomposing the metal nitrates $Fe(NO_3)_39H_2O, Zn(NO_3)_26H_2O, Ni(NO_3)_26H_2O, and Cu(NO_3)_23H_2O$ at $150^circ{C}$ for 24 hours, and then we calcined the synthetic powder at $500^circ{C}$, pulverized each of those for 3, 6, 9, 12, and 15 hours in a steel ball mill, sintered each at $700^circ{C}$ to $1,000^circ{C}$ for 1 hour, and thus studied their microstructures and electromagnetic properties. We could make the initial specimens chemically bonded in liquidity at a low-temperature $150^circ{C}$, by using the low melting points less than $200^circ{C}$ of the metal nitrates instead of the mechanical ball-mill pulverization, then narrow a distance between the particles into a molecular one, and thus lower the reaction point of sintering by at least $200^circ{C}$ to $300^circ{C}$. Their initial permeability was 50 to 400 and their maximum magnetic induction density and coercive force, 2,400 G and 0.3 Oe to 0.5 Oe respectively, which was similar to those of NiZnCu ferrite synthesized in the conventional process. In the graph of initial permeability by frequencies, a $180^circ{C}$ rotation of the magnetic domains which appears in a broad band of micro-wave before and after the resonance frequency, could be perceived.

• 한국수소및신에너지학회논문집
• /
• 제3권2호
• /
• pp.25-33
• /
• 1992

With the aim to obtain $TiO_2$ films with an increased photorespones and absorbance in the visible region of the solar spectrum, the direct oxidation of titanium alloys were performed. In this study, $Ti-Ga_2O_3$ alloy was prepared by mixing, pressing and arc melting of appropriate amounts of titanium and $Ga_2O_3$ powder. Electrochemical measurements were performed in three electrode cell using electrolyte of 1M NaOH solution. The oxide films on $Ti-Ga_2O_3$ alloy was composed of $Ti_2O$, TiO, $TiO_2$, $Ga_2TiO_5$. The free energy efficiency (${\eta}e$) of $Ti-Ga_2O_3$ oxide films had 0.8~1.3 % and were increased with the increase of $Ga_2O_3$ content up to 10wt %. The onset potential ($V_{on}$) had -0.8V~0.9V ranges and were shifted to anodic direction with the increase of $Ga_2O_3$ content. The spectral response of Ti-$Ga_2O_3$ oxides were similar to the response of the $TiO_2$ and their $E_g$ were observed to 2.90~3.0eV. Variations of onset potential($V_{on}$) associated with electrolyte pH were -59mV/pH. This probably reflects the nature of the bonding of $OH^-$ ion to the $TiO_2$ surface, a common phenomena in the transition-metal oxides.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.267-267
• /
• 2006

전력에 큰 손실을 초래하는 고장전류를 차단하기 위한 한류기(FCL) 소재로서 고온 초전도체인 BSCCO 2212가 사용된다. 고온에서 용융된 BSCCO 2212 분말은 원심성형법에 의해 한류기용 튜브로 제조되었다. BSCCO 튜브의 기계적 특성을 높이고 용융온도를 낮추기 위해 $SrSO_4$(10wt-%)를 첨가하였다. 용탕은 $1200^{\circ}C$에서 완전히 용융되어 금속 몰드로 주입되었고 원심성형에 사용되는 금속 몰드는 $550^{\circ}C$ 온도로 2시간 예열 후 1020 ~ 2520 RPM으로 회전시켰다. 원심력에 의해 성형된 BSCCO 튜브는 약 48시간 동안 로에서 서냉 후 금속 몰드로부터 분리하였다. 튜브의 용이한 분리를 위해 이형제로서 BSCCO 2212 powder를 사용하였고 임계전류측정을 고려하여 Ag tape 단자를 튜브 끝단에 부착하였다. BSCCO 제조 공정에 있어서 몰드의 예열온도, 용융온도, 몰드 회전속도 등의 변수를 조절하여 최적의 조건을 확립하였다. 제조한 BSCCO 튜브의 임계전류($I_c$)와 임계전류밀도($J_c$)는 77K에서 536A와 $205A/cm^2$ 이었다. 본 연구에서는 BSCCO 2212 튜브를 제조하는 공정조건 변화와 각 조건에서 제조된 BSCCO 2212 튜브의 전기적 특성 및 그에 따른 분석에 대해 기술하였다.

• 한국재료학회지
• /
• 제24권5호
• /
• pp.255-258
• /
• 2014

Zirconium boride is an artificial or which is rarely found in the nature. $ZrB_2$ is popular in the hard material industry because it has a high melting point, excellent mechanical properties and chemical stability. There are two known methods to synthesize $ZrB_2$. The first involves direct reaction between Zr and B, and the second is by reduction of the metal halogen. However, these two methods are known to be unsuitable for mass production. SHS(Self-propagating High-temperature Synthesis) is an efficient and economic method for synthesizing hard materials because it uses exothermic reactions. In this study, $ZrB_2$ was successfully synthesized by subjecting $ZrO_2$, Mg and $B_2O_3$ to SHS. Because of the high combustion temperature and rapid combustion, in conjunction with the stoichiometric ratio of $ZrO_2$, Mg and $B_2O_3$; single phase $ZrB_2$ was not synthesized. In order to solve the temperature problem, Mg and NaCl additives were investigated as diluents. From the experiments it was found that both diluents effectively stabilized the reaction and combustion regime. The final product, made under optimum conditions, was single-phase $ZrB_2$ of $0.1-0.9{\mu}m$ particle size.

• 열처리공학회지
• /
• 제4권1호
• /
• pp.13-18
• /
• 1991

The formation of high $T_c$ phase is very sluggish and c parameter of unit cell of high $T_c$ phase is about $37{\AA}$. High $T_c$ oxide superconductor with a $T_c$ above 100 K has been successfully prepared by solid state reaction method in BiSrCaCuO system by Pb adding. The microstructure related to the formation of the high $T_c$ phase has been investigated. As compared with YBCO compound, the formation reaction of the high $T_c$ requires long time heat treatment. It is due to the transformation from the low $T_c$ phase to high $T_c$ phase. The sintering just below the melting point of the calcined powder mixture is effective on the formation of the high $T_c$ phase in Pb-added BiSrCaCuO system. The growth of the high $T_c$ superconducting phase has a thin plate shape, which is characterized by the c parameter of $37{\AA}$. The formation of the high $T_c$ phases is delayed by the excessive addition of Pb. The lattice parameter(c) of the unit cell (both the low and high $T_c$ phases) is increased with increase of Pb.