• 한국산업정보학회논문지
• /
• 제7권3호
• /
• pp.32-37
• /
• 2002

본 연구에서는 생 대두의 약열 성으로 대두의 분말 화시 마찰열에 의한 영양소가 파괴되며 생 대두 안에 수분과 단백질, 지질의 엉킴 현상으로 대두의 분말화가 어려운 실정이다. 전지활성 생 대두 미세 분말은 저온 가열처리에 의해 리폭시게나이즈와 같은 효소를 파괴시키지 않는 방법의 일환으로서 원적외선 건조방법을 이용하여 대두분말의 품질이 우수한 분말 제조법의 개발로 산업화함으로써 국민건강에 기여할 수 있다고 하겠다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1009-1012
• /
• 2003

A novel powder processing technique for the preparation of copper activated zinc sulfide (ZnS:Cu,Al) phosphor by combustion process has been proposed. Exothermic reaction between dissolved copper nitrate and carbohydrazide give small-sized particles in presence of alkali metal halides at lower temperature than the traditional method of preparation. This new route takes less than five minutes and requires much less energy. The optical and luminescence characteristics of ZnS:Cu,Al phosphor thus prepared were found to be enhanced significantly. Carbohydrazide acted as fuel at $500^{\circ}C$ with rapid heating and then the phosphors obtained were heated at $900^{\circ}C$ in an inert atmosphere for 3hrs to get better luminescent properties.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.215-221
• /
• 2014

Translucent alumina is a potential candidate for high temperature application as a replacement of the glass or polymer. Recently, due to the increasing demand of high power light emitting diode (LED), there is a growing interest in the translucent alumina. Since the translucent property is very sensitive to the internal defect, such as voids inside or abnormal grain growth of sintered alumina, it is important to fabricate the defect-free product through the fabrication process. Powder injection molding (PIM) has been commonly applied for the fabrication of complex shaped products. Among the many parameters of PIM, the flowability of powder/binder mixture becomes more significant especially for the shape of the cavity with thin thickness. Two different positions of the gate were applied during PIM using the disc type of die. The binder was removed by solvent extraction method and the brown compact was sintered at $1750^{\circ}C$ for 3 hours in a vacuum. The flowability was also simulated using moldflow (MPI 6.0) with two different types of gate. The effect of the flowability of powder/binder mixture on the microstructure of the sintered specimen was studied with the analysis of the simulation result.

• 대한화학회지
• /
• 제55권6호
• /
• pp.932-935
• /
• 2011

Using tetrabutyl titanate as precursor, $Eu^{3+}$ doped $TiO_2$ nano-powder was prepared by sol-gel method, the nature of luminescence of nano-powder was studied. The interaction of chlorpyrifos with $Eu^{3+}$ doped $TiO_2$ was studied by absorption and fluorescence spectroscopy. The results indicated the fluorescence intensity of $Eu^{3+}$ doped $TiO_2$ was quenched by chlorpyrifos and the quenching rate constant ($k_q$) was $1.24{\times}10^{11}\;L/mol{\cdot}s$ according to the Stern-Volmer equation. The dynamics of photoinduced electron transfer from chlorpyrifos to conduction band of $TiO_2$ nanoparticle was observed and the mechanism of electron transfer had been confirmed by the calculation of free energy change (${\Delta}G_{et}$) by applying Rehm-Weller equation as well as energy level diagram. A new rapid method for detection of chlorpyrifos was established according to the fluorescence intensity of $Eu^{3+}$ doped $TiO_2$ was proportional to chlorpyrifos concentration. The range of detection was $5.0{\times}10^{-10}-2.5{\times}10^{-7}mol/L$ and the election limit ($3{\sigma}$) was $3.2{\times}10^{-11}$ mol/L.

• 한국건축시공학회지
• /
• 제14권3호
• /
• pp.230-236
• /
• 2014

본 연구는 최근 제주도 지역내 현무암 가공과정에서 발생되는 폐기물인 석분슬러지를 재활용하기 위한 방안으로서, 인공경량골재의 제조가능성에 대해 실험하였다. 또한, 현무암 석분 슬러지로 제조된 인공경량골재의 물성을 개선하기 위해 폐유리분말과 탄산칼슘이 사용되었다. 현무암 석분 슬러지와 폐유리분말 그리고 소성방법의 복합적인 요인을 고려할 때 경량골재 내부의 발포성 향상을 위해서 탄산칼슘의 양은 9 wt.%가 적당하였다. 또한, 제조된 인공경량골재의 흡수율을 저하시키기 위해서는 폐유리 분말은 50 wt.%이내로 사용함과 동시에 직화소성의 방법을 적용하는 것이 더 효과적이다. 좀 더 낮은 비중과 흡수율을 가진 고품질의 인공경량골재를 성형하기 위해서는 성형된 경량골재의 표면에 폐유리분말을 도포한 후 그 시료를 직화소성법으로 소성하는 것이 더 효과적일 것으로 판단된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1013-1016
• /
• 2003

A new route for the synthesis of silver doped of zinc sulfide phosphor by combustion method has been investigated. Silver nitrate was decomposed with urea or carbohydrazide to give small size particles in presence of alkali metal halides at low temperature compared to the conventional method. The high temperature inherent to the highly exothermic nature of redox reaction leads to well-crystallized powder in short time. The phosphors thus obtained were further heated at $1050^{\circ}C$ in an inert atmosphere for 3hrs to get better luminescence properties.

• 산업기술연구
• /
• 제21권B호
• /
• pp.133-139
• /
• 2001

Generally $PbTiO_3$ is manufactured in a form of thin films which is useful for the application of infrared sensors and non-volatile memory devices. Moreover $PbTiO_3$ has a characteristic of adsorption for organic acid as well as electronic property. Organic acid adsorption properties of $PbTiO_3$ powder prepared by sol-gel method was compared with the powder purchased from Aldrich Co. Crystallization and particle size of $PbTiO_3$ are influenced by process variables, such as dilution of sol solution, catalysis, calcination temperature, calcination time, etc. As the size of $PbTiO_3$ power decreased until several nanometers, adsorption of acetic acid and formic acid was increased 1.5-fold and 1.2-fold respectively.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.22-27
• /
• 2018

One problem of the Discrete Element Method is the assumption of a spherical particle shape, which reduces the computing time but significantly limits the application of the DEM to analysis. This limitation can be overcome by a recently developed rigid-rod model. However, the rigid-rod model has an essential problem related with friction: it always contains friction error because of the bumpy surface. To overcome this issue, we suggest a superposed rigid-rod model in this paper. The superposed rigid-rod model is notably consistent with the theoretical value in terms of the velocity and angular velocity after the collision. The estimated error is negligible(less than 2%). Then, the developed model is applied to hopper discharging. The developed model shows no problem in the discharging flow from the hopper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2160-2163
• /
• 2005

Solid freeform fabrication (SFF) technology plays a major role in industry and represents a reasonable percentage of industrial rapid prototyping/tooling/manufacturing (RP/RT/RM) development applications. However, SFF technology still has long way to progress to achieve satisfactory process speed, surface finish and overall quality improvement of its application. Today, three dimensional printing (3DP) technique that is one of SFF technology is receiving many interests, and is applied by various fields. It can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. However, need long curing time after manufacture completion. And it must do post-processing process necessarily to heighten strength of objects because strength of fabricated objects is very weak. Therefore, in this study, we proposed an improved 3DP process that can solve problems of conventional 3DP process. The general 3DP process is method to spout binder simply through printer head on powder, but proposed process is method to cure jetted UV resin by UV lamp after jet UV resin using printhead on powder. The hardening of resin is achieved strongly at early time by UV lamp in proposed method. So, the proposed process can fabricate three dimensional objects with high speed without any post-processing.

• 대한화장품학회지
• /
• 제30권2호
• /
• pp.197-200
• /
• 2004

감촉 및 광학적 요소는 파우다 파운데이션에 있어서 매우 중요한 요소이다. 이러한 감촉과 광학적인 요소를 동시에 만족하는 분체에 관심을 가지고 다양한 소재 및 제조방법을 연구 중에 바륨설페이트를 기본 입자로 하는 복합화 된 분체를 개발하게 되었다. 바륨설페이트는 입자의 모양이 매우 넓고 표면의 굴곡이 없는 판상으로 감촉면에서 부드러운 사용성과 균일한 부착 특성을 나타내며 굴절율도 피부보다 약간 높은 수준으로 인위적이지 않고 자연스러운 광학적 특성을 나타내고 있다. 그러나 파운데이션에서 요구되는 광학적 특성인 자외선 차단능력이나 커버력, 블루밍 효과에 있어서는 기대수준에 못 미치는 것을 알 수 있었다. 이러한 특징은 파우다 파운데이션에서 사용되는 대부분의 분체에 있어서 공통적으로 나타나는 특성으로 감촉적인 측면(소프트, 밀착력 등)과 광학적 측면(커버력, 자외선 차단력 등)을 동시에 만족하는 분체가 극히 드문 것을 알 수 있다. 본 연구에서는 이러한 점을 극복하고자 감촉적인 측면에서 우수한 바륨설페이트를 모입자로 하고 자외선 차단능력과 블루밍에서 우수하나 자체의 응집력이 강하고 사용감이 거친 특징을 나타내고 있는 티타늄디옥사이드를 자입자로 하여 복합화하려 하였다. 이때 중요 요소로 복합화 되는 티타늄디옥사이드의 함량에 따라 복합안료의 감촉적인 측면과 분산력 등이 민감하게 달라지는 것을 알 수 있었다. 이에 패널을 이용하여 복합안료의 사용성에 영향을 미치지 않는 수준의 함량을 결정하여 복합화 처리했으며, 사용자가 피부에 도포시 발생되는 피지나 땀에 대한 변색과 사용감을 고려하여 피지나 땀에 강한 발수, 발유 능력을 나타내며 부드러운 감촉의 디메치콘으로 복합안료를 코팅 처리하여 복합분체를 만들게 되었다. 이렇게 만든 복합분체(barium sulfate/TiO$_2$/dimethicone)를 패널을 이용한 테스트와 기기를 이용한 테스트를 실시하여 효과를 검증하게 되었다.