• 대한화장품학회지
• /
• 제32권1호
• /
• pp.45-51
• /
• 2006

화장품에서 색조 화장품 분야에서 분체의 함유율이 높은 투웨이케익, 팩트, 페이스파우더와 같은 파우더류 제품은 함유되는 분체의 물성이 품질에 큰 영향 인자로 작용하기 때문에 분체의 복합화, 금속비누 처리, 아미노산처리, 실리콘처리, 불소 처리등을 통한 품질 향상을 목적으로 표면처리가 시도되어 왔다. 위와 같은 파우더류 제품중에 투웨이케익은 커버력이 가장 요구되는 제품으로서 부착성이나 퍼짐성과 같은 부가품질의 동시 구현이 다른 파우더류 제품보다 어려우며, 화장을 두껍게 느끼거나 답답하다는 사용자들의 잠재불만도 존재하는 제품군이다. 본 연구는 투웨이케익 제품의 중요품질인 부착성과 퍼짐성을 향상시키고, 친화성을 충분히 고려한 새로운 표면처리 방법으로서 피부성분과 구조를 모사하여, 스킨케어에 주로 사용하는 성분들로 나노베시클을 제조하여 그 구조를 파괴하지 않은 상태로 표면 처리하는 방법에 대한 것이다. 분체를 제조하기 위해 먼저, 레시친, 세라마이드, 초산토코페롤, 부틸렌글리롤을 사용하여 고압.유화로 나노유화물을 제조하였고, 이것을 수상에 분산된 체질안료 분산액에 투입, 2가 금속염 용액을 투입한 후, 여과, 건조과정을 통해 나노베시클이 피복된 새로운 기능의 분체를 얻었다. 피복되는 공정에서는 금속염의 농도에 따라 피복량이 결정됨을 확인하였고, 피복된 파우더의 물성에서는 현재 주로 사용하는 실리콘 처리체질안료에 비해 본 연구를 통해 제조된 파우더의 마찰계수가 낮았으며, 외력에 의한 부착성 평가에서도 파우더의 이탈량이 적은 결과를 나타내었다. 또한 이를 함유한 투웨이케익과 함유하지 않은 투웨이케익의 평가에서도 같은 경향의 결과를 나타내었다.

• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.87-97
• /
• 2012

This paper presents a method of estimating the setting time of cement mortar incorporating recycled aggregate powder (RP) and cement kiln dust (CKD) at various curing temperatures by applying an equivalent age method. To estimate setting time, the equivalent age using apparent activation energy (Ea) was applied. Increasing RP and CKD leads to a shortened initial and final set. Ea at the initial set and final set obtained by Arrhenius function showed differences in response to mixture type. These were estimated to be from 10~19 KJ/mol in all mixtures, which is smaller than those of conventional mixture ranging from 30~50 KJ/mol. Based on the application of Ea to Freisleben Hansen and Pederson's equivalent age function, equivalent age is nearly constant, regardless of curing temperature and RP contents. This implies that the concept of maturity is applicable in estimating the setting time of concrete containing RP and CKD. A high correlation was observed between estimated setting time and measured setting time. A multiregression model was provided to determine setting time reflecting RP and CKD. Thus, the setting time estimation method studied herein can be applicable to concrete incorporating RP and CKD in the construction field.

• Mass Spectrometry Letters
• /
• 제9권2호
• /
• pp.41-45
• /
• 2018

Ginseng (Panax ginseng Meyer) has been used as traditional herbal drug in Asian countries. Ginsenosides are major components having pharmacological and biological efficacy like anti-inflammatory, anti-diabetic and anti-tumor effects. To control the quality of the components in diverse ginseng products, we developed a new quantitative method using LC-MS/MS for 13 ginsenosides; Rb1, Rb2, Rc, Rd, Re, Rf, 20(S)-Rh1, 20(S)-Rh2, Rg1, 20(S)-Rg3, F1, F2, and compound K. This method was successfully validated for linearity, precision, and accuracy. This quantification method applied in four representative ginseng products; fresh ginseng powder, white ginseng powder, red ginseng extract powder, and red ginseng extract. Here the amounts of the 13 ginsenosides in the various type of ginseng samples could be analyzed simultaneously and expected to be suitable for quality control of ginseng products.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2002년도 강연요지집
• /
• pp.97-117
• /
• 2002

A chemoinfometrical method for quantitative determination of crystal content of indomethacin (IMC) polymorphs based on fourie-transformed near-infrared (FT-NIR) spectroscopy was established. A direct comparison of the data with the ones collected from using the conventional powder X-ray diffraction method was performed. Pure $\alpha$ and ${\gamma}$ forms of IMC were prepared using published methods. Powder X-ray diffraction profiles and NIR spectra were recorded for six kinds of standard materials with various content of ${\gamma}$ form IMC. The principal component regression (PCR) analyses were performed based on normalized NIR spectra sets of standard samples of known content of IMC ${\gamma}$ form. A calibration equation was determined to minimize the root mean square error of the prediction. The predicted ${\gamma}$ form content values were reproducible and had a relatively small standard deviation. The values of ${\gamma}$ form content predicted by two methods were in close agreement. The results were indicated that NIR spectroscopy provides for an accurate quantitative analysis of crystallinity in polymorphs compared with the results obtained by conventional powder X-ray diffractometry.

• 대한화학회지
• /
• 제38권6호
• /
• pp.411-417
• /
• 1994

난용성 신소재 중의 하나인 파인 세라믹의 분석을 위하여, 알칼리 용융법과 고압 산분해법 등의 시료 전처리법을 유도결합원자발광분석기(ICP-AES)를 이용하여 연구하였다. Al2O3 분말을 분석하여 본 결과, 고압 산분해법이 알칼리 용융법보다 재현성 있는 측정치를 얻을 수 있었다. SiC분말의 경우에서는 고압산분해법으로 처리한 후 Si매트릭스를 Si-F형태로 증발시켜서 분석하여 본 결과 분말 중의 ppm 농도 범위의 불순물들이 매트릭스에 의한 간섭없이 분석되었다. 일본 인증기준물인 JCRM022, JCRM023 초미립 분말을 고압 산분해법으로 분석하여 본 결과, 좋은 재현성과 높은 정확성을 나타내었다.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.479-482
• /
• 2018

Polystyrene superstructure films show faint rainbow color, and this low color saturation limits its wide application. In this paper, polystyrene superstructure films with single bright blue color were prepared by vertical deposition self-assembly method using polystyrene microspheres with average diameter of $310{\pm}10nm$ as raw material. Polystyrene superstructure films were modified by adding nano-carbon powder, and effect of the amount of nano-carbon powde on color performance was studied. The results showed that without addition of nano-carbon powder, the superstructure films showed a faint rainbow color, while with addition of nano-carbon power, the superstructure films exhibited a single bright blue under the same natural light source. Changing the amount of nano-carbon powder addition could adjust color saturation of the film. With increasing the amount of nano-carbon powder addition from 0.008 wt% to 0.01 wt%, color saturation of the superstructure film increased gradually. Further increasing the amount of nano-carbon powder addition to 0.011wt%, color saturation of the superstructure film didn't increase anymore and tended to get dark.

• 한국분말재료학회지
• /
• 제11권4호
• /
• pp.288-293
• /
• 2004

The application concept of using a fail safety filter on the filtering system is to prevent the particle leakage when the main filter element is broken at high temperature. In this study, the metal filters were fabricated by pressureless sintering method. The mixture of stainless steel powders and filler metal binder solved in the water solutions of 5% PVA was compacted to form the cylindrical filter without pressure. The compacted filter were sintered in the vacuum sintering furnace at 120$0^{\circ}C$ for 1 hour. The metal filter(produced with powder of 640-840 ${\mu}m$ size) having more than above 50% porosity, 500${\mu}m$ pore size, and permeability of 7.3${\times}$10$^{-11}$m$^{2}$ plugged within 2.5 minute to prevent the leakage of maximum slip particle size of less than 3${\mu}m$.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.87-88
• /
• 2006

Ceramic-Metal Functionally Graded Materials (FGM) are of great interest for application as Thermal Barrier Coating (TBC) or Wear Resistant Coating (WRC). Spark Plasma Sintering (SPS) is a promising techniques for time-saving consolidation of laminated/graduated powder systems: SPS is a pressure-assisted electrical sintering method which directly applies a pulsed DC current as heat source. In the present work, production of $Al_2O_3-Ni$ FGMs by means of Spark Plasma Sintering is considered; effect of sintering condition on density, hardness and fracture toughness is studied. Problems correlated to this new processing technology are discussed.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.1-7
• /
• 2016

Cu-Mn compacts are fabricated by the pulsed current activated sintering method (PCAS) for sputtering target application. For fabricating the compacts, optimized sintering conditions such as the temperature, pulse ratio, pressure, and heating rate are controlled during the sintering process. The final sintering temperature and heating rate required to fabricate the target materials having high density are $700^{\circ}C$ and $80^{\circ}C/min$, respectively. The heating directly progresses up to $700^{\circ}C$ with a 3 min holding time. The sputtering target materials having high relative density of 100% are fabricated by employing a uniaxial pressure of 60 MPa and a sintering temperature of $700^{\circ}C$ without any significant change in the grain size. Also, the shrinkage displacement of the Cu-Mn target materials considerably increases with an increase in the pressure at sintering temperatures up to $700^{\circ}C$.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.512-520
• /
• 2017

This paper is a numerical study of various methods of applying SOFC hot BOP insulation. The application methods are four cases from case 1 to case 4, and the performance difference between the result of applying powdered insulation and the result of zoning using composite multi-layer insulation was examined. Numerical results show that the thermal stability of composite multi-layer insulation is better than that of powder insulation when the thermal conductivity is 0.04 W/mK. In the future, we will increase the thermal conductivity of the composite multi-layer thermal insulation material and find the greatest value of thermal conductivity with a similar result to that of the powder insulation.