• 한방안이비인후피부과학회지
• /
• 제16권3호
• /
• pp.38-67
• /
• 2003

The burn is acute skin injury caused by fire, hot water. steam. hot oil, sour and salty. It is occurred frequently in the daily life as well as oriental therapy like moxibustion therapy, physical therapy. Nevertheless, medical treatment of the burn is almost dependent on western cure. So we chose the oriental medicine textbooks and the oriental medicine journals that were dealing with the drugs, processing the drugs. peculiar treatment put first external cure. The results were as follows; 1. The burn is acute skin injury caused by fire, hot water, steam, hot oil, sour and salty. 2. The burn cause blisters, irritability and restlessness, nausea, dryness of mouth, constipation, in case of serious, coma, dyspnea and death. The early stage of the burn, blisters form by skin damage and they burst into skin ulceration from which pus issues, the latter term, the wound form scab and healed up. 3. In a light case, medical treatment of the burn was used external treatment by medicine for externalism use, in a serious case, it was used both as an internal remedy and medicine for outward application. Also in the early stage, it was careful of using the cold and cool medicine, as the process of healing, it was used alleviating pain, detoxicating, moistening the skin, growing muscle and skin, convergence, evacuating pus, regeneration of the tissue, strengthen the spleen and nourishing the stomach. 4. The external treatment medication is Herba Ephedrae Oil(麻油), Radix ET Rhizoma Rhei(大黃), Glauberitum(寒水石), Water(水), Pig OiI(猪油), Pig Fat(猪脂), Radix Angelicae Gigantis(當歸), Rhizoma Coptidis(黃連), Cortex Phellodindri(黃栢). The White of an Egg(鷄子淸), Raw Honey(生蜜), Honey(蜜), Wine(酒), Etc. It is mostly the cold and cool medications. 5. Soft extracted and powered dosage form in external treatment is much used. The soft extracted form(32times used) are mostly Chung Ryang paste(淸凉膏) and Fructus Papaveris paste(罌粟膏). The powered form(30times used) are mostly Bingsang Powder(氷霜散), Bosaenggugo Powder(保生救苦散), Sahwang Powder(四黃散). The others is much a various powder adding solvent. 6. If varicella stage, erosion after varicella stage, oozing stage and extreme pain stage, the powder adding solvent is much used. If little oozing stage. ulcering stage, scabing stage and a chronic stage, Soft extracted dosage form is much used. 7. The most many(26.65%) used method is that apply each medication power mixed water(水), wine(酒), honey(蜜) in a wounded part.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.459-468
• /
• 2008

Methyl methacrylate(MMA) was grafted onto microcrystalline cellulose(MCC) with ceric ammonium nitrate(CAN) as a redox initiator at the various conditions. The cellulose triacetate(CTA) composite films added MCC and MMA-grafted MCC powders were prepared on a glass plate. The graft yield(GY) and graft efficiency(GE) of the grafted MCC were calculated with the simple equations by the weight balance method. The double bond of C=O on the grafted MCC surfaces was confirmed by the fourier transform infrared spectroscopy with attenuated total reflection(FT-IT ATR) spectrophotometer. After grafting, the degree of crystallinity of cellulose powders was decresed by judging from x-ray diffraction(XRD) data. Scanning electron microscope(SEM) photos showed the only solvent and CAN solution could change the roughness of MCC powders and the effect of powder dispersions in composite matrix. The tensile strength of MCC/CTA composite films was decreased with increase of MCC powder contents. When 5% grafted MCC was added, the tensile strength of grafted MCC/CTA composite films was increased from 82.3 MPa to 97.2 MPa. The thermal property of powders was also analyzed by the thermogravimetric analysis(TGA).

• 한국식품저장유통학회지
• /
• 제9권1호
• /
• pp.74-77
• /
• 2002

솔잎으로부터 항균, 항산화효과 등이 입증된 바 있는 polyphenols 분리.정제를 실시하였다. 이 물질의 분리를 위한 추출용매로는 열수, EtOH, IPA를 사용하였는데, 각각의 용매에 의하여 분리된 polyphenols의 수율 및 순도는 각각 9.84, 11.61, 14.36% (w/w) 및 83.83, 82.64, 81.52%였다. 추출조건은 솔잎분말 대비 약 7배 (w/v)에 해당하는 용매를 가하고 85$^{\circ}C$에서 6시간 동안의 처리로 추출이 가능하였다. 분리된 polyphenols의 정제는 formamide-active carbon(1:1, w/w)을 충진한 column을 통과시켜 정제한 다음 농축, 분무건조 하고, 이 분말에 식품첨가물용 n-hexane(1:2.5, w/v)을 가하여 1시간 동안 추출하여 지방성분을 추출, 제거하고 풍건하여 각각의 시제품을 얻었다. Polyphenols의 추출용매로는 열수, EtOH, IPA 중 수율과 순도를 동시에 고려할 때, 상호간의 장단점이 있었는데, 수율과 순도간에는 정의 반비례 관계가 성립하였다.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.759-764
• /
• 2011

Mixed-conducting oxide powders, $BaCe_{0.9}Y_{0.1}O_{2.95}$ (BCY) and $SrCe_{0.9}Y_{0.1}O_{2.95}$ (SCY) powders have been prepared by a solid-state reaction method. Xray diffraction patterns of the prepared powders showed the sharp peaks of the $BaCe_{0.9}Y_{0.1}O_{2.95}$ and $SrCe_{0.9}Y_{0.1}O_{2.95}$ phases. The oxide powders that were prepared by attrition milling showed rather large particles and severe necking between particles in FE-SEM images as well as residual reactant ($BaCO_3$) and secondary phases ($SrCeO_3$ and $CeO_2$) in XRD patterns. The oxide powders prepared using ball milling showed particles under approximately 500 nm and typical XRD patterns of the $BaCe_{0.9}Y_{0.1}O_{2.95}$ and $SrCe_{0.9}Y_{0.1}O_{2.95}$ phases. Ceramic membranes of the $BaCe_{0.9}Y_{0.1}O_{2.95}$ and $SrCe_{0.9}Y_{0.1}O_{2.95}$ phases were fabricated by the aerosol deposition method using the oxide powders synthesized.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.68-74
• /
• 2018

Study on the Ti-6Al-4V have been carried out using cutting simulation, and researches for cutting force and chip shape prediction have been actively conducted under various conditions. However, a 3D printer application method using Ti-6Al-4V metal powder material as a high-power method has been studied for the purpose of prototyping, mold modification and product modification while lowering material removal rate. However, in the case of products / parts made of 3D printers using powder materials, problems may occur in the contact surface during tolerance management and assembly due to the degradation of the surface quality. As a result, even if a 3D printer is applied, post-processing through cutting is essential for surface quality improvement and tolerance management. In the cutting simulation, the cutting force and the chip shape were predicted based on the Johnson-Cook composition equation, but the shape of the shear type chip was not predictable. To solve this problem, we added a damaging term or strain softening term to the Johnson-Cook constitutive equation to predict chip shape. In this thesis, we applied the constant value of the S-K equations to the cutting simulation to predict the cutting force and compare with the experimental data to verify the validity of the cutting simulation and analyzed the machining characterization by considering conditions.

• 대한의용생체공학회:의공학회지
• /
• 제43권2호
• /
• pp.116-123
• /
• 2022

This study analyzes the Mechanical properties of a medical bone plate by 3D printing. With the recent development of 3D printing technology, it is being applied in various fields. In particular, in the medical field, the use of 3D printing technology, which was limited to the existing orthosis and surgical simulation, has recently been used to replacement bones lost due to orthopedic implants using metal 3D printing. The field of application is increasing, such as replacement. However, due to the manufacturing characteristics of 3D printing, micro pores are generated inside the metal printing output, and it is necessary to reduce the pores and the loss of mechanical properties through post-processing such as heat treatment. Accordingly, the purpose of this study is to analyze the change in mechanical performance characteristics of medical metal plates manufactured by metal 3D printing under various conditions and to find efficient metal printing results. The specimen to be used in the experiment is a metal plate for trauma fixation applied to the human phalanx, and it was manufactured using the 'DMP Flex 100(3D Systems, USA), a metal 3D printer of DMLS (Direct Metal Laser Sintering) method. It was manufactured using the PBF(Powder Bed Fusion) method using Ti6Al4V ELI powder material.

• 한국분말재료학회지
• /
• 제30권4호
• /
• pp.356-362
• /
• 2023

Inorganic-organic composites find extensive application in various fields, including electronic devices and light-emitting diodes. Notably, encapsulation technologies are employed to shield electronic devices (such as printed circuit boards and batteries) from stress and moisture exposure while maintaining electrical insulation. Polymer composites can be used as encapsulation materials because of their controllable mechanical and electrical properties. In this study, we propose a polymer composite that provides good electrical insulation and enhanced mechanical properties. This is achieved by using aluminum borate nanowhiskers (ABOw), which are fabricated using a facile synthesis method. The ABOw fillers are created via a hydrothermal method using aluminum chloride and boric acid. We confirm that the synthesis occurs in various morphologies based on the molar ratio. Specifically, nanowhiskers are synthesized at a molar ratio of 1:3 and used as fillers in the composite. The fabricated ABOw/epoxy composites exhibit a 48.5% enhancement in mechanical properties, similar to those of pure epoxy, while maintaining good electrical insulation.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.966-970
• /
• 2006

We reported on characteristics of the piezoelectric ceramic-polymer composite for the application of the thick-film speaker. The PVDF-PZT composites were fabricated to incorporate the advantages of both ceramic and polymer with various mixing ratios by 3-roll mill mixer. The composite solutions were coated by the conventional screen-printing method on ITO electrode coated PET (Polyethylene terephthalate) polymer film. After depositing the top-electrode of silver-paste, 4 kV/mm of DC field was applied at $120^{\circ}C$ for 30 min to poling the composite films. The value of $d_{33}$ (piezoelectric charge constant) was increased when the PZT weight percent was increased. The maximum value of the $d_{33}$ was 24 pC/N at 70 wt% PZT. But the $g{33}$ (piezoelectric voltage constant) showed the maximum value of $32mV{\cdot}m/N$ at 65 wt% of PZT powder. The SPL (sound pressure level) of the speaker fabricated with the 65:35 composite film was about 68 dB at 1 kHz.

• 대한의용생체공학회:의공학회지
• /
• 제16권4호
• /
• pp.533-542
• /
• 1995

The present study investigated the effectiveness of pretreatment on dentin bonding. The adhesive resin was 5% 4-methacryloyloxyethyl trimellitate anhydride (4-META) in methyl methacrylate (MMA) combined with poly-MMA powder. Polymerization of this resin was initiated by tri-n-butyl borage (TBB). Ground bovine dentin samples were etched with either an aqueous solution of 10% citric (10-0 solution) (Group I) or aqueous solution of 10% citric acid and 3% ferric chloride(10-3 solution) (Group ll ). After etching, the primer (an aqueous solution of 35% hydroxyethyl methacrylate (HEM- A) and 5% glutaraldehyde was applied on the differently etched surfaces (Group III , Group IV). The 10-0 treatment showed the lowest tensile bond strength, followed by the 10-3 treatment, primer application after the 10-0 treatment and primer application after the 10-3 treatment. The relationship among the surface morphology after pretreatment, fractured surface morphology and tensile bond strength was examined. It revealed that the surface morphology change by different pretreatment influenced the bond strength and the resulting fractured surface morphology. The correlation of tensile bond strength with the fracture morphology was explained.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.156-159
• /
• 2006

Gasification and melting method is one of the most potential means for waste treatment process with low emission of fly ash or heavy metal, dioxin and high possibility of using slags as resources. Moisture contents influences directly a gasification characteristics of waste. So it is necessary to investigate the effect of moisture contents in gasification. But it is hard to consider the effect of moisture contents, using samples of powder form of Milligram's order in existing thermogravimetric analyser. Therefore, we made a thermogravimetric analysis device to applicate samples of Gram's order. Gasification characteristics are typically reported with result from thermogravimetric analysis date for wood and RDF samples along with changing moisture contents. It is discussed the way to apply these analysis results to gasification and melting furnace.