• 센서학회지
• /
• 제23권1호
• /
• pp.51-57
• /
• 2014

The evaporating materials for $MgGa_2Se_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $MgGa_2Se_4$ compounded polycrystal powder was deposited on thoroughly etched semi-insulated GaAs(100) substrate by the hot wall epitaxy (HWE) method system. The source and substrate temperatures of optimized growth conditions, were $610^{\circ}C$ and $400^{\circ}C$, respectively.The source and substrate temperatures were $610^{\circ}C$ and $400^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by double crystal X-ray diffraction (DCXD). The temperature dependence of the energy band gap of the $MgGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=2.34\;eV-(8.81{\times}10^{-4}\;eV/K)T^2/(T+251\;K)$. After the as-grown $MgGa_2Se_4$ single crystal thin films was annealed in Mg-, Se-, and Ga-atmospheres, the origin of point defects of $MgGa_2Se_4$ single crystal thin films has been investigated by the photoluminescence (PL) at 10 K. The native defects of $V_{Mg}$, $V_{Se}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Se-atmosphere converted $MgGa_2Se_4$ single crystal thin films to an optical n-type. Also, we confirmed that Ga in $MgGa_2Se_4$/GaAs did not form the native defects because Ga in $MgGa_2Se_4$ single crystal thin films existed in the form of stable bonds.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.137-163
• /
• 1990

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the Properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of the consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfate and the magnesium sulfate promoted the hardening and the aluminium phosphate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect of the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate and cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.24-30
• /
• 2009

희토류 원소를 기반으로한 알루미늄산 형광체에 담지된 산화티탄은 졸겔방법 으로 제조되었다. 이렇게 제조된 산화티탄 나노입자의 재료물성을 분석하기 위해 XRD, FT-IR, DRS UV-Vis, TEM 측정을 실시하였다. 형광체에 담지된 산화티탄 입자의 소결 전후의 XRD분석결과는 600도 이상의 온도에서 아나타제에서 루틸로 상변화가 일어나지 않았다. 600도 이상의 온도에서 지속적인(장시간) 열처리 후에도 형광체에 담지된 산화티탄이 결정화도가 높은 아나타제로 존재 하는 것은 형광체 지지체와 담지된 산화티탄의 서로 다른 결정입계에 의하여 결정성장과 상변화에 필요한 치밀화가 억제되기 때문으로 판단된다. DRS측정결과 형광체에 담지된 산화티탄은 산화티탄이 없는 형광체에 비하여 보다 긴 장파로 쉬프트한 것은 밴드갭 에너지의 환원을 나타낸다. 이러한 형광체에 담지된 산화티탄의 FT-IR 스펙트럼은 피크의 위치가 더 높은 파수로 이동하였다. 이것은 산화티탄 입자와 지지체 사이의 공유결합이 관계하기 때문 이라 판단된다. TEM 이미지는 형광체 지지체에 다른 입자 크기로 담지되어 있는 산화티탄의 분산, 결정화 및 입자 형상을 나타낸다.

• Journal of Biosystems Engineering
• /
• 제39권2호
• /
• pp.122-133
• /
• 2014

Purpose: This study was to develop an effective process for fabricating biocompatible calcium phosphate powders (CPPs) using horse bones, and to investigate the characteristics of them. Methods: The characteristics of horse bone powders (HBPs) were investigated according to the different osseous tissue types (compact bone and cancellous bone), bone types (spine and tibia), pretreatment methods (cold water, $H_2O_2$, and hot water), sintering time (4, 8 and 12h), and sintering temperature (600, 900, 1100 and $1300^{\circ}C$). In addition, the grinding methods were compared based on the wet grinding (ball mill) and dry grinding (blade grinder) method to make it as powders. Finally, their cytotoxicity and cell viability were checked. Results: Regardless of the types of osseous tissues and bones, HBPs were well fabricated as biocompatible CPPs. It was also found that the pretreatment methods did not influence on the resultants, showing well-fabricated HBPs. Considering the processing time, the hot water method was the most suitable compared to other pretreatment methods. Further, 12h-sintering time was sufficient to remove residual organic compounds. The sintering temperatures greatly affected the properties of bone powders fabricated. The x-ray diffraction (XRD) peak of horse bone sintered at $600^{\circ}C$ was most closed to that of hydroxyapatite (HA). Our bioactivity study demonstrated that the HBPs fabricated by sintering horse bones at $1300^{\circ}C$ showed the best performance in terms of cell viability whereas the HBPs $1100^{\circ}C$ showed the cytotoxicity. Conclusions: Using various types of horse bone tissues, biocompatible CPPs were successfully developed. We conclude that the HBPs may have a great potential as biomaterials for various biological applications including bone tissue engineering.

• 한국방사선학회논문지
• /
• 제9권3호
• /
• pp.169-174
• /
• 2015

본 연구는 $LiGd_9(SiO_4)_6O_2:Ce^{3+}$ 형광체를 고상법으로 합성하여 X선 회절 실험으로 결정화 정도와 인회석 구조를 확인하였다. $LiGd_9(SiO_4)_6O_2:Ce^{3+}$ 형광체의 $Ce^{3+}$이온의 농도 변화에 따른 여기 및 방출 스펙트럼과 수명시간을 측정하였다. 여기 스펙트럼에서 $Ce^{3+}$ 이온의 농도 증가에 따라 276 nm ($Gd^{3+}$ $^8S_{7/2}{\rightarrow}^6I{_J}$ 전이) 형광 세기가 감소하는 에너지 전달을 확인하였다. 방출 스펙트럼에서 $Ce^{3+}$ 이온의 농도 증가에 따라 결정장의 변화에 의해 410 nm($Ce^{3+}$ $^2F_{5/2}$ and $^2F_{7/2}$) 방출 밴드의 파장이 장파장 쪽으로 이동하는 특성을 확인하였으며 314 nm에서 $Gd^{3+}$에서 $Ce^{3+}$로의 에너지 전달로 인해 $Gd^{3+}$ 형광 방출 세기가 감소하는 것을 확인하였다. $LiGd_9(SiO_4)_6O_2:Ce^{3+}$ 형광체의 $Ce^{3+}$의 수명시간은 약 20 ns로 짧은 특성을 나타내었고 $Ce^{3+}$의 농도가 증가하면 수명시간이 수 ns 감소하였다.

• Archives of Pharmacal Research
• /
• 제28권5호
• /
• pp.604-611
• /
• 2005

Polyethylene glycol (PEG) 6000-based solid dispersions (SDs), by incorporating various pharmaceutical excipients or microemulsion systems, were prepared using a fusion method, t o compare the dissolution rates and bioavailabilities in rats. The amorphous structure of the drug in SDs was also characterized by powder X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The ketoconazole (KT), as an antifungal agent, was selected as a model drug. The dissolution rate of KT increased when solubilizing excipients were incorporated into the PEG-based SDs. When hydrophilic and lipophilic excipients were combined and incorporated into PEG-based SDs, a remarkable enhancement of the dissolution rate was observed. The PEG-based SDs, incorporating a self microemulsifying drug delivery system (SMEDDS) or microemulsion (ME), were also useful at improving the dissolution rate by forming a microemulsion or dispersible particles within the aqueous medium. However, due to the limited solubilization capacity, these PEG-based SDs showed dissolution rates, below 50% in this study, under sink conditions. The PEG-based SD, with no pharmaceutical excipients incorporated, increased the maximum plasma concentration (C$_{max}$) and area under the plasma concentration curve (AUC$_{0-6h}$) two-fold compared to the drug only. The bioavailability was more pronounced in the cases of solubilizing and microemulsifying PEG-based SDs. The thermograms of the PEG-based SDs showed the characteristic peak of the carrier matrix around 60$^{\circ}C$, without a drug peak, indicating that the drug had changed into an amorphous structure. The diffraction pattern of the pure drug showed the drug to be highly crystalline in nature, as indicated by numerous distinctive peaks. The lack of the numerous distinctive peaks of the drug in the PEG-based SDs demonstrated that a high concentration of the drug molecules was dissolved in the solid-state carrier matrix of the amorphous structure. The utilization of oils, fatty acid and surfactant, or their mixtures, in PEG-based SD could be a useful tool to enhance the dissolution and bioavailability of poorly water-soluble drugs by forming solubilizing and microemulsifying systems when exposed to gastrointestinal fluid.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.108-113
• /
• 2013

$CuInSe_2$(CIS) chalcopyrite 물질은 고효율 박막 태양전지를 위한 광흡수층의 물질로 매우 잘 알려져 있다. 최근 태양광 산업의 흐름은 안정적인 재료 개발과 가격 경쟁력 있는 태양전지를 위한 효율적인 제조 공정을 일치시키는 것이다. 저가의 CIS 광흡수층 위해 다양한 방법으로 제조를 시도하였고, 본 논문에서는 CIS 광흡수층을 저가형으로 제조를 위해 상용화되는 6 mm pieces를 사용하여 high frequency ball milling과 cryogenic milling을 이용해 CIS 나노입자를 얻었다. 그리고, CIS 광흡수층은 불활성 분위기의 glove box 안에서 milling된 나노입자를 사용하여 paste coating법으로 제조하였다. Chalcopyrite CIS 박막은 기판온도 550도에서 30분간 셀렌화 한 후 성공적으로 제조되었으며, Al/ZnO/CdS/CIS/Mo 구조의 CIS 태양전지는 evaporation, sputtering 및 chemical bath deposition(CBD) 등 다양한 증착 방법으로 각각 제조하였다. 결론적으로, 나노입자를 이용한 CIS 태양전지 전기적 변환효율은 1.74 %를 얻었으며, 개방전압(Voc)는 29 mV, 합선전류밀도(Jsc)는 35 $mA/cm^2$, 그리고 충진율(FF)은 17.2 %였다. 나노입자 CIS 광흡수층은 energy dispersive spectroscopy(EDS), x-ray diffraction(XRD) 그리고 high-resolution scanning electron microscopy(HRSEM) 등으로 특성 분석을 하였다.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.16-21
• /
• 2001

4원 화합물 반도체인 $Ag_2CdSnSe_4$ 및 $Ag_2CdSnSe_4$:$CO^{2+}$ 단결정을 화학수송법으로 성장시켜 광학적 특성을 조사하였다. 성장된 결정들은 wurtzite 결정구조로서 격자상수는 각각 a = 4.357 $\AA$, c = 7.380 $\AA$($Ag_2CdSnSe_4$:$CO^{2+}$)이었다. 298k에서의 광 흡수 측정으로부터 구한 에너지 띠 간격은 순수한 $Ag_2$CdSnSe의 경우 1.21eV, cobalt 불순물로 첨가한 $Ag_2CdSnSe_4$의 경우 1.02ev이었으며, cobalt를 불순물로 첨가함에 따라 190meV의 에너지 띠 간격의 감소를 보였다. $Ag_2CdSnSe_4$ 결정의 광 흡수 스펙트럼에서 4개의 흡수 피크들을 관측하였으며, 이들 피크 들은 $T_d$결정장내에서 스핀 - 궤도결합효과에 의한 $Co^{2+}$ 이온의 분리된 준위사이의 전자전이에 의한 것으로 설명되었다.

• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.139-165
• /
• 1991

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfata and the magnesium sulfate promoted the hardening and the aluminium phoshpate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect fo the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near $250^{\circ}C$ and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate ad cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.57-58
• /
• 2008

PTC thermistor are characterized by an increase in the electrical resistance with temperature. The PTC materials of middle Curie point were produced or that of high Curie point (above $200^{\circ}C$), it was determined that compositional modifications of $Pb^{2+}$ for $Ba^{2+}$ produce change sin the Curie point to higher temperature. PTC ceramic materials with the Curie point above $120^{\circ}C$ were prepared by adding $PbTiO_3$, PbO or $Pb_3O_4$ into $BaTiO_3$. Thereby, adding $Pb^{2+}$ into $BaTiO_3$-based PTC material to improve Tc was studied broadly, however, weal know that PbO was poisonous and prone to volatilize, then to pollute the circumstance and hurt to people, so we should dope other innocuous additives instead of lead to increase Tc of composite PTC material. In order to prepare lead-free $BaTiO_3$-based PTC with middle Curie point, the incorporation on $Bi_{1/2}Na_{1/2}TiO_3$ into $BaTiO_3$-based ceramics was investigated on samples containing 0, 1, 2, 3, 4, and 50mol% of $Bi_{1/2}Na_{1/2}TiO_3$. $Bi_{1/2}Na_{1/2}TiO_3$ was compounded as standby material by conventional solid-state reaction technique. The starting materials were $Bi_{1/2}Na_{1/2}TiO_3$, $BaCO_3$, $TiO_2$ and $Y_2O_3$ powder, and using solid-state reaction method, too. The microstructures of samples were investigated by SEM, DSC, XRD and dielectric properties. Phase composition and lattice parameters were investigated by X-ray diffraction.