• 제목/요약/키워드: pottery

검색결과 272건 처리시간 0.019초

강원도 태백시 고사리도석광산에 산출하는 점토광물의 산상 및 특성 (Occurrence and Mineralogical Properties of Clay Minerals in the Gosari Pottery Stones Mine in Taebek, Kangweon-do)

  • 황진연;정윤영
    • 한국광물학회지
    • /
    • 제7권2호
    • /
    • pp.97-110
    • /
    • 1994
  • 고사리광산의 도석에는 다량의 석영과 함께 녹니석/스멕타이트 혼합층광물, 운도/스멕타이트 혼합층광물, 카오리나이트와 같은 점토광물이 산출한다. 이들 점토광물에 대해 주로 X-선회전분석과 화학분석 등을 이용하여 광물학적 특성을 검토하였다. 이 광산의 도석은 녹니석/스멕타이트 혼합층광물을 다량 함유하는 것이 특징으로 나타났다. 이 녹니석/스멕타이트 혼합층광물은 Li을 함유하는 돈바싸이트로 된 녹니석층과 바이델라이트에 가까운 스apr타이트층으로 구성된 혼합층구조를 이룬다. 이 곳에 산출하는 운모/스멕타이트 혼합층광물은 모두 약 15% 이하의 팽윤층을 포함하는 것으로 되어 있다.이 광산의 도석은 백악기의 유문암 및 유문암질 응회암이 열수변질작용을 받아 형성된 것으로 나타났다. 점토광물조합의 분포상태에 의해 대략적인 변질분대가 나누어진다. 중심부인 강변질대에서는 다량의 녹니석/스텍타이트 혼합층광물이 나타나며 카오리나이트가 수받되기도 한다. 그 외곽지역의 약변질대에서는 점토광물로서 운모/스멕타이트 혼합층광물이 주로 나타난다. 카오리나이트는 주로 열극이나 그 주위에 국부적으로 산출되는 경향이 있다. 이와 같은 변질광물의 산출상태로 볼 때 변질작용의 진행에 따라 운모/스멕타이트 혼합층광물이 먼저 형성된 후 이것의 일부가 녹니석/스맥타이트 혼합층광물 및 카오리나이트로 변화된 것으로 생각된다. 도 카오리나이트는 열수의 공급이 많은 열극부에서 녹니석/스멕타이트 혼합층 광물과 거의 동시기에 침전된 것으로 생각된다. 이 광산에서 산출하는 일부 운모/스멕타이트 혼합층광물은 후기의 변질작용에 의해 형성된 것도 포함된다.

  • PDF

황토의 일반적 특성 및 산화철 함량 (General Properties and Ferric Oxide Content of Hwangtoh(Yellow Ochre))

  • 김인규;서성훈;강진양
    • Journal of Pharmaceutical Investigation
    • /
    • 제30권3호
    • /
    • pp.219-222
    • /
    • 2000
  • The purpose of this research was to investigate the general properties and main ingridients of Hwangtoh, which is the Korean loess. It is well known as a raw material of pottery shown to be widely scattered on the earth, especially in Korea. It belongs to primary clay that was found to be rich on mountain surface or field. In this study, XRF Spectral method was employed to analyze the chief ingredients of Hwangtoh, being found to consist of $43{\sim}50%\;SiO_2,\;2{\sim}34%\;Al_2O_3,\;2{\sim}3%\;Mg,\;2{\sim}3%\;Na\;and\;1{\sim}2%\;K$. The ferric oxide contents of Hwangtoh from San Chung, Ha Dong, Ko Ryung, Ouk Chong, Bang Gae and Song Kwang were 6.46, 7.96, 11.26, 9.36, 9.06 and 9.28 %, respectively. The general characteristics of Hwangtoh from different places were studied by determining the content of water and the capacity to maintain temperature. Based on the above results, Hwangtoh could be said to have better quality than primary clay of Kaolin dose, and also would be able to find an application in construction formulations.

  • PDF

황남대총(남분)의 서역계 유리제품 특성화 연구 (Characterization of Western Asia Glassware excavated from Hwangnamdaechong Great Tomb)

  • 강형태;정영동;허우영;신용비
    • 한국문화재보존과학회:학술대회논문집
    • /
    • 한국문화재보존과학회 2004년도 제20회 발표논문집
    • /
    • pp.131-134
    • /
    • 2004
  • A lot of foreign objects(ceramics, pottery, bronze, glassware and coins, etc.) have been found in the archaeological sites in Korea. These foreign objects are the evidences of the cultural exchanges of that time, whose scale and routes are an important part of the studies in ancient history. So it is crucial to accumulate basic reference information such as the raw materials and the production method of these objects through scientific researches, along with archeological researches. These scientific research materials provide a basis for finding the importing route and the origin of these objects. Besides, we can find out extraordinary and distinctive production technique by comparison with tile domestic objects. This article reports the result of an analysis, performing on 36 samples of the glassware fragments excavated from the South Tomb of the Hwangnamdaechong, to verify their components and note peculiar features. We have analyzed the major and minor components of 10 elements, and then by using these data examined the differences in the composition of components, varying with the origin and color of glassware. We used the PCA(principal component analysis) as the statistical method to classify the sample in order to find out how the samples formed groups.

  • PDF

슬러지를 이용한 인공토양 생산 및 농자재화 가능성 연구 (Feasibility Study of Artificial Soil Production with Sludge and Utilization for Agriculture)

  • 김선주;윤춘경;이남출
    • 한국농공학회지
    • /
    • 제39권5호
    • /
    • pp.64-70
    • /
    • 1997
  • Sludge is generated in the process of water and wastewater treatment, and it has been causing various problems environmentally and economically. The firing technology in pottery industry was applied to the sludge treatment, and the final product was called artificial soil. For the production of artificial soil, lime and chabazite was used as additive, and the mixed material was thermally treated in the firing kiln at $300^{\circ}$ temperature for about 15 minutes. The physico-chemical characteristics of the artificial soil was analyzed and it showed that the artificial soil could be used as a soil conditioner for farmland. The concentrations of the toxic heavy metals in the artificial soil were lower than those in the soil quality standard for farmland. It was high in permeability, total nitrogen and total phosphorous concentrations and surface area of the artificial soil compared to the common field soil. Preliminary cost analysis showed that the sludge treatment cost for artificial soil was less than the disposal cost in the current landfill disposal method. This study illustrated that the artificial soil production process can be a feasible alternative for sludge treatment, and produced artificial soil may he applied to farmland without causing significant adverse effect. Further study is recommended for practical application of the system and verification of the longterm effect of the artificial soil on farmland.

  • PDF

제조신뢰성 확보를 위한 청자의 소성조건 분석에 관한 연구 (A Study on Fireing condition analysis of celadon porcelain for reliability manufacturing)

  • 이철중;이병기;강경식;이병하
    • 대한안전경영과학회지
    • /
    • 제7권4호
    • /
    • pp.229-248
    • /
    • 2005
  • The purpose of this study is to identify the best firing condition for Celadon, which is one of the famous traditional pottery to represent Korean culture, by minimizing energy consumption, cutting firing time, shortening the time of processing ceramic making, in order to, save energy as well as to protect the potters' health. Most Korean potter starts their reduction from $950^{\circ}C$ to change kiln atmosphere. However on this study, reduction have started from $950^{\circ}C\;to\;1200^{\circ}C$ by increasing $50^{\circ}C$ at a time. Then the results are analyzed to be compared to previous Celadon, in colors, chroma, and brightness. As a results, it is found, that the best temperature for starting reduction is $1100^{\circ}C$, when chroma and brightness values to meet same with previous celadon. Therefore the best condition could be made by starting the reduction on $1100^{\circ}C$ to fire celadon, which would have shorten 2 hours of firing process and, at the same time, it could have saved the energy by 12%.

도.토기의 화학조성-경주 황남대총 출토 도.토기를 중심으로 (The scientific analysis of potteries excavated from Kyong-ju relics-In terms of potsherds excavated from Wangkyong, Walsung, Hwangnam great tomb)

  • 홍종욱;문환석;황진주;조남철
    • 보존과학연구
    • /
    • 통권20호
    • /
    • pp.91-120
    • /
    • 1999
  • This paper presents the results of investigation on crystal, firing temperature and trace elements analysis of fragments 4~8 centriesexcavated from Kyong ju historical sites such as Wang kyong,Walsung, Hwangnam great tomb by application of optical microscope, neutron activation analysis and X-ray diffraction. Temper analysis of clay for identification of local or foreign production; Trace elements is not presented a unique chemical composition. That’s data have to be treated a statistical process in order to normalize. The results followed ;(1) Firing temperature could be estimated $700^{\circ}C$ on some softness pottery at Walsung and most of hardness others are $1,000^{\circ}C$ to $1,200^{\circ}C$.(2) Crystal structures are divided into three kinds of mineralogical composition(Quartz, Mullite, Feldspar).(3) Considering of the results of statistical data, chemical composition of Walsung is more similarly Wang kyong than Hwangnam great tomb.

  • PDF

분화류를 이용한 화훼장식 디자인의 개발 (Development of Floral Designs by Using Potted Plants)

  • 변미순;이진호;김정숙;김규원
    • 화훼연구
    • /
    • 제16권3호
    • /
    • pp.186-195
    • /
    • 2008
  • 화훼장식의 자연적 및 비자연적 구성의 다양함을 보여주기 위해 분화류를 이용하여 작품을 제작하고 전시하였다. 형태는 구, 원기둥, 피라미드, 파라솔형 등으로 하고, 용기는 투명 비닐우산, 옹기, 주트 등으로 하였다. 전시하기 곤란한 조각난 공간을 활용하는 방법도 제시하였다. 분화류를 이용한 화훼장식품은 감상기간이 길고, 각기 다른 공간에 적합하게 적용할 수 있을 것으로 기대한다.

북한산림복구용 용기묘 식재기 개발 (Development of Pottery Planting Equipment for the Restoration of North Korean Forest)

  • 최종오
    • 한국환경복원기술학회지
    • /
    • 제26권1호
    • /
    • pp.61-68
    • /
    • 2023
  • In North Korea, the production of courage tombs continues, and it is known that the activity rate is higher than that of old tombs. However, pot seedling are planted using hoes and shovels used for planting old tombs with exposed roots and low activity rates. This is believed to result in excessive force when stepping on the container grave with a hoe in the planting process, resulting in the collapse of the container grave or the waste of labor due to the creation of unnecessary planting holes. Therefore, when planting courage graves at North Korean afforestation sites, it is necessary to improve the work of making planting holes using general hoes in a way that improves labor productivity in a more efficient manner. As part of inter-Korean technical cooperation to improve the North Korean afforestation method, this study was conducted with the aim of developing efficient container seedlings and using them for North Korean forest restoration projects. It is believed that developing planting equipment exclusively for container graves for forest restoration in North Korea in South Korea and providing equipment and production technology to North Korea can contribute to the development of forest restoration technology in North Korea. If the Yonggeomyo Development Planting Equipment is provided to North Korea, it will be a realistic inter-Korean forest cooperation project to avoid international sanctions by recognizing the excellence of the development products by directly using its own materials through technical cooperation.

전남 지방에서 출토된 고대 기와의 태토 조성 (Body composition of Ancient Roofing Tiles Excavated from Chonnam Province)

  • 강경인;최영기
    • 보존과학회지
    • /
    • 제9권1호
    • /
    • pp.11-20
    • /
    • 2000
  • 전남 지방에서 출토된 고대 기와의 태토 조성을 X-선 회절 분석과 유도 결합 플라즈마 발광분석에 의해 고찰하였으며, 분석 대상의 기와는 산성 유적과 와요지에서 출토된 것이다. 기와는 태토의 광불 조성에 따라 5 계통으로 분류되었으며, 각 출토지별로 화학 조성이 달랐다. 기와는 출토지에 관계없이 철분 4~10%을 함유한 태토이며, 저급의 원료를 채취한 상태 그대로 사용하였다. 이들 유적에서 출토된 고대 기와는 사용 원료, 소성 온도 등의 기술적인 차이에 따른 태토 특성을 반영하고 있었다. 각 유적에서 출토된 기와는 바나듐 원소에 의해 지질학적 특성 차이를 확인할 수 있었으며, $SiO_2$와 바나듐 원소에 의해 출토지별로 명확히 구분되었다. 한편 여수의 고락산성과 척산 산성에서 출토된 기와는 유사한 태토 조성을 지니고 있지만, 지질학적 특성에는 명확한 차이가 있었다.

  • PDF

강릉 신복사지 석조보살좌상 보물 제84호 수지상 오염물 제거 방안 연구 (Removing Resin Contaminants from the Seated Stone Buddha (Korean Treasure No.84) of Sinboksa Temple Site in Gangneung)

  • 이병훈;고형순
    • 박물관보존과학
    • /
    • 제15권
    • /
    • pp.56-65
    • /
    • 2014
  • 강릉에 위치한 신복사지 석조보살좌상 보물 제84호 얼굴부에 광택이 있는 수지상 오염물이 고착되어 있었다. 오염의 범위는 백호부터 턱 밑까지이며 광택이 발생하여 미관을 해치고 있었다. 오염물 중 일부를 수거하여 FT-IR 분석을 실시한 결과 시아노아크릴계 순간접착제인 것을 확인하였다. 분석된 접착제는 면봉 등에 아세톤을 묻혀 녹이면서 제거하는 방법이 일반적이다. 그러나 석조보살좌상이 야외에 오랜 시간 노출되어 있어 표면 풍화가 많이 진행된 상태이므로 이를 고려하여 물리적 손상을 최소화하는 방법으로 제거하였다. 기존에 처리된 삼전도비의 페인트 낙서 제거에 적용된 습포법과 도토기의 수지제거에 이용된 증기법을 검토하여 물리적 손상 없이 제거할 수 있는 방법을 찾아보았다. 습포법과 증기법을 같이 적용하면 면봉을 이용한 물리적 작업없이 24시간 이내에 수지가 제거되는 것을 확인하였고 이를 토대로 현장에 적용하였다.