• 전기학회논문지
• /
• 제62권5호
• /
• pp.649-656
• /
• 2013

A conventional epoxy-microsilica composite (EMC) and an epoxy-microsilica-nanosilicate composite (EMNC) were prepared in order to apply them to mold-type transformers, current transformers (CT) and potential transformers (PT). Nanosilicate was exfoliated in a epoxy resin using our electric field dispersion process and AC insulation breakdown strength at $30{\sim}150^{\circ}C$, glass transition temperature and viscoelasticity were studied. AC insulation breakdown strength of EMNC was higher than that of EMC and that value of EMNC was far higher at high temperature. Glass transition temperature and viscoelasticity property of EMNC was higher than those of EMC at high temperature. These results was due to the even dispersion of nanosilicates among the nanosilicas, which could be observed using transmission electron microscopy (TEM). That is, the nanosilicates interrupt the electron transfer and restrict the mobility of the epoxy chains.

• 한국대기환경학회지
• /
• 제33권1호
• /
• pp.45-53
• /
• 2017

A high resolution model is proposed for calculating the temperature field of a large city, based upon a Lagrangian particle model. Utilizing the analogy between the heat and mass transport phenomena in turbulent flows, a Lagrangian particle model, originally developed for air pollutant dispersion problems, is adapted for simulating heat transport. In the model conceptual heat particles are released into the atmosphere from the heat sources and move along with the turbulent winds in accordance with the Markov process. The potential temperature assumed to be conserved along with heat particles serves as a tag, so the temperature fields can be deduced from the distribution of particles. The wind fields are constructed from a diagnostic meteorology model incorporating a morphological model designed for building flows. Test run shows the robustness of the modeling system.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.61-67
• /
• 2008

In this paper, electrochemical and microstructural characteristics of nickel-plated Alloy 600 were investigated in order to identify the performance of electroless Ni-plating on Alloy 600 in high-temperature aqueous condition with the comparison of electrolytic nickel-plating. For high temperature corrosion test of nickel-plated Alloy 600, specimens were exposed for 770 hours to typical PWR primary water condition. During the test, open circuit potentials (OCP's) of all specimens were measured using a reference electrode. Also, resistance to flow accelerated corrosion (FAC) test was examined in order to check the durability of plated layers in high-velocity flow environment at high temperature. After exposures to high flow rate aqueous condition, the integrity of surfaces was confirmed by using both scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). For the field application, a remote process for electroless nickel-plating was demonstrated using a plate specimen with narrow gap on a laboratory scale. Finally, a practical seal design was suggested for more convenient application.

• Tribology and Lubricants
• /
• 제25권6호
• /
• pp.421-426
• /
• 2009

The brake system is important part of automobile safety system. The disc brake system is divided two parts: the rotating axisymmetrical disc and the stationary pads. During braking, the kinetic energy and potential energy of moving vehicle were converted into the thermal energy through frictional heat between the brake disc and the pads. The frictional heat, which is generated on the interface of the disc and pads, can cause high temperature during the braking process. The object of present work is to determine temperature and thermal stress, to compare to simulation results and experimental results in the disc by partial 3D model of ventilated disc brake with appropriate boundary conditions. In the simulation process, the mechanical loads were applied to the thermo-mechanical coupling analysis in order to simulate the process of heat produced by friction.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.487-493
• /
• 1997

SiC(4H) 결정에 Ti을 열증착하여 Ti/SiC(4H) 쇼트키(Schottky) 장벽 다이오드를 만들었다. SiC(4H)의 주개농도(donor concentration)는 전기용량-전압(C-V) 측정으로부터 $2.0{\times}10^{15}{\textrm}{cm}^{-3}$이었으며, 내부전위(built-in potential)는 0.65 V이었다. 전류-전압(I-V) 특성으로 부터 다이오드의 이상계수(ideally factor)는 1.07이었으며, 역방향 항복전장(breakdown field)은 약 $1.7{\times}10^3V/{\textrm}{cm}$이었다. 상온에서 $140^{\circ}C$까지 온도변화에 따라 측정된 포화전류로 부터 구한 전위장벽(potential barrier)은 0.91 V이었는데, 이는 C-V 특성으로 부터 구한 전위장벽과 거의 같았다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.125-130
• /
• 1996

A numerical analysis is conducted on heat transfer and fluid flow of a plasma spraying process under the DC-RE hybrid electromagnetic field. Plasma flow is analyzed by using Eulerian approach and the equation of particle motion is simultaneously solved using a trajectory analysis with a lumped-heat-capacity model. Axisymmetric two dimensional electromagnetic fields governed by Maxwell's equations are solved based on a vector potential concept. The effects of the RF electromagnetic field on the temperature and velocity fields of the turbulent plasma flow are clarified. Control characteristics of phase changes and dispersed features of particles by applying the RF electromagnetic field are also clarified in an attempt to improve the plasma spraying process

• 환경생물
• /
• 제36권4호
• /
• pp.672-679
• /
• 2018

본 연구는 MaxEnt 모형을 활용하여 가는털비름의 잠재서식지를 예측하고, 예측된 잠재서식지와 밭면적을 활용하여 가는털비름의 잡초로서의 부정적 영향에 대한 위험도 지수를 예측하기 위하여 수행되었다. 가는털비름의 분포 예측을 위하여 MaxEnt 모형을 구축하기 위하여 남한 전국의 254지점의 분포 자료와 6개의 생물 기후 인자를 활용하였다. 밭농업에 대한 두가지 방법의 위험도 평가를 수행하였고 격자 위험도 지수(raster risk index)는 $1km^2$ 격자별로 잠재 서식지 분포 확률과 밭면적의 비율을 서로 곱하여 나타냈다. 지역 위험도 지수(regional risk index)는 잠재 서식지 분포 확률의 평균과 전체 밭 면적 중 지방자치단체의 실제 밭면적의 비율을 곱하여 산출하였다. MaxEnt모형으로 예측된 가는털비름의 잠재서식지는 실제서식지와 유사하게 나타났으며 모델의 AUC 값 또한 0.711로 좋은 설명력을 지니는 것으로 분석되었다. 잠재서식지 비율이 가장 높게 나타난 지역은 광주광역시였고 격자 위험도 지수가 가장 높게 나타난 지역은 제주도였다. 지역 위험도 지수가 가장 높게 나타난 지역은 경상북도였다. 잠재 서식지 비율과 위험도 지수의 서로 다른 순위는 외래식물의 위험성을 예측할 때 잠재 서식지 비율만을 활용하여 외래식물의 위험성을 예측하는 것보다 외래식물이 부정적 영향을 주는 대상과 결합된 위험도 지수의 필요성을 제시한다. 또한 격자 위험도 지수, 지역 위험도 지수의 서로 다른 순위는 분석의 필요성에 따라서 다양한 평가 기법이 개발될 필요성을 보여준다.

• 전기의세계
• /
• 제25권1호
• /
• pp.95-100
• /
• 1976

The main purpose of this paper is to study on the transient current due to the change of environmental temperature under no external field in the arrangement of M$_{1}$(metal)-P(polyver)-M$_{2}$(metal). The specimer of polymeric insulator sandwiched by two metal electrodes composes a parallel-plate condenser represented by Maxwell-model. The behaviors of short circuit current flowing in M-P-M arrangement are very complex and the analysis of its conduction mechanism appears to be much complicated. In this paper we can suggest that a contact potential difference as an energetic state exists in the thin film specimen both sides of which are contacted by two different metals having different cook functions. Futhermore the contact potential difference appears to be constant through the course of temperature change, however, the dielectric constant and caparitance of the specimen must be temperature dependent. Accordingly the charge difference induced on both sides of electrodes may be a cause for the shory circuited transient current flowing through the external circuit. It is also suggestive that the results of the observation must be considered in cases of insulation design of electrical machines and D.C. cable for high voltage use.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1211-1217
• /
• 2016

Discharge characteristics of inductively coupled plasma were investigated by using electrostatic probe and fluid simulation. The Inductively Coupled Plasma source driven by 13.56 Mhz was prepared. The signal attenuation ratios of the electrostatic probe at first and second harmonic frequency was tuned in 13.56Mhz and 27.12Mhz respectively. Electron temperature, electron density, plasma potential, electron energy distribution function and electron energy probability function were investigated by using the electrostatic probe. Experiment results were compared with the fluid simulation results. Ar plasma fluid simulations including Navier-Stokes equations were calculated under the same experiment conditions, and the dependencies of plasma parameters on process parameters were well agreed with simulation results. Because of the reason that the more collision happens in high pressure condition, plasma potential and electron temperature got lower as the pressure was higher and the input power was higher, but Electron density was higher under the same condition. Due to the same reason, the electron energy distribution was widening as the pressure was lower. And the electron density was higher, as close to the gas inlet place. It was found that gas flow field significantly affect to spatial distribution of electron density and temperature.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2610-2624
• /
• 2024

Liquid metal heat pipes play a critical role in various high-temperature applications, with their optimization being pivotal to achieving optimal thermal performance. In this study, a deep learning based genetic algorithm is suggested to optimize the operating conditions of liquid metal heat pipes. The optimization performance was investigated in both single and multi-variable optimization schemes, considering the operating conditions of heat load, inclination angle, and filling ratio. The single-variable optimization indicated reasonable performance for various conditions, reinforcing the potential applicability of the optimization method across a broad spectrum of high-temperature industries. The multi-variable optimization revealed an almost congruent performance level to single-variable optimization, suggesting that the robustness of optimization method is not compromised with additional variables. Furthermore, the generalization performance of the optimization method was investigated by conducting an experimental investigation, proving a similar performance. This study underlines the potential of optimizing the operating condition of heat pipes, with significant consequences in sectors such as high temperature field, thereby offering a pathway to more efficient, cost-effective thermal solutions.