• 터널과지하공간
• /
• 제22권1호
• /
• pp.43-53
• /
• 2012

개착면의 방향성과 규모가 점진적으로 변화되는 개착사면의 안정성을 지반의 암석학적, 구조적 및 역학적 특성을 종합적으로 고려한 횡단면 분석기법을 활용하여 분석하였다. 시추작업을 수행하여 획득한 코어시료를 관찰하여 사면지반의 암석학적 취약성을 조사하였으며, 시추공 내 BIPS 영상을 획득하여 사면 내부의 구조적 특성을 규명하였다. 시추코어 및 코어절리시료를 이용한 암석실험을 통해 사면 지반의 공학적 특성을 분석하였다. 평사투영해석을 수행하여 잠재적인 사면거동 양상과 거동유발 절리들을 분석하였으며, 거동유발 절리들의 트레이스 분포를 개착 형상이 고려된 횡단면상에 도시하였다. 횡단면에 분포된 평면파괴 절리들이 기저면을 형성하는 평면블록들을 절리 트레이스 분포를 고려하여 설정하였다. 횡단면 상에서 심도별 평면블록들의 안정성과 적정 안전율을 유지하기 위하여 요구되는 지보량을 산정하여 최적 사면 설계안 수립에 대한 횡단면 기법의 활용성을 고찰하였다.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.36-41
• /
• 2004

This paper presents an qualitative assessment for hazard on the electric power installations of a construction field using FMEL The power installations have the mission to maintain the highest level of service reliability on the works. The more capital the electric power invest the higher service reliability they plausibly will achieve. However, because of limited resources, how effectively budgets can be allocated to achieve service reliability as high as possible. The assessment typically generates recommendations for increasing component reliability, thus improving the power installation safety. The FMEA tabulates the failure modes of components and how their failure affects the power installations being considered. Tn order to estimate the risks of a failures, the FMEA presents criticality estimation or risk priority number using the severity, occurrence, and detectability. The results showed that the highest components of the risk priority number among components were condenser, transformer, MCCB and LA. And In case of the criticality estimation, the potential failure modes were abnormal temperature rise, insulation oil leakage, deterioration for the transformer, overcurrent for the MCCB and operation outage fir the LA.

• 한국지반공학회지:지반
• /
• 제4권2호
• /
• pp.15-24
• /
• 1988

확정론적 방법으로 안정조건을 만족하는 T형옹벽을 대상으로 지지력, 활동, 전도의 단일파괴류 형에 대해 설계변수를 통계적 독립이고 정규분포로 가정하여 AFOSM 방법으로 신뢰도 해석을하였다. 이를 바탕으로 각 파양모드 사이의 상관성을 고려한 구조물 전체적인 신뢰도는 신뢰지수로 2.05 이었다. 그러므로, 확정론적 설계법에 의해 안전상태로 판단된다 할지라도 신뢰도개념으로는 일반적인 목표신뢰지수(Target reliability index) 3보다 훨씬 낮기 때문에 안정상태로 판단하기는 곤란하다.

• 산업경영시스템학회지
• /
• 제31권4호
• /
• pp.162-167
• /
• 2008

FMEA (failure mode and effect analysis)is a widely used technique to assess or to improve reliability of product not only at early stage of design and development, but at the process and service phase during the product life cycle. In designing a service system, this study proposes a fuzzy service FMEA with the service blueprints as a tool which describes customer actions, onstage contact employees actions, backstage contact employees actions, support processes, and physical evidences, in order to analyse and inform service delivery system design. We fuzzified only two risk factors, occurrence and severity, to more effectively assess the potential failure modes in service. Proposed fuzzy risk grades are applied to Gaussian membership function, defuzzified into Fuzzy Inference System, and eventually identified the ranks on the potential fail points.

• 한국안전학회지
• /
• 제36권2호
• /
• pp.49-57
• /
• 2021

In the case of military supplies, any potential failure and causes of failures must be considered. This study is aimed at examining the failure modes of a rotorcraft landing system to identify the priority items. Failure mode and effects analysis (FMEA) is applied to the rotorcraft landing system. In general, the FMEA is used to evaluate the reliability in engineering fields. Three elements, specifically, the severity, occurrence, and detectability are used to evaluate the failure modes. The risk priority number (RPN) can be obtained by multiplying the scores or the risk levels pertaining to severity, occurrence, and detectability. In this study, different weights of the three elements are considered for the RPN assessment to implement the FMEA. Furthermore, the FMEA is implemented using a fuzzy rule base, similarity aggregation model (SAM), and grey theory model (GTM) to perform a comparative analysis. The same input data are used for all models to enable a fair comparison. The FMEA is applied to military supplies by considering methodological issues. In general, the fuzzy theory is based on a hypothesis regarding the likelihood of the conversion of the crisp value to the fuzzy input. Fuzzy FMEA is the basic method to obtain the fuzzy RPN. The three elements of the FMEA are used as five linguistic terms. The membership functions as triangular fuzzy sets are the simplest models defined by the three elements. In addition, a fuzzy set is described using a membership function mapping the elements to the intervals 0 and 1. The fuzzy rule base is designed to identify the failure modes according to the expert knowledge. The IF-THEN criterion of the fuzzy rule base is formulated to convert a fuzzy input into a fuzzy output. The total number of rules is 125 in the fuzzy rule base. The SAM expresses the judgment corresponding to the individual experiences of the experts performing FMEA as weights. Implementing the SAM is of significance when operating fuzzy sets regarding the expert opinion and can confirm the concurrence of expert opinion. The GTM can perform defuzzification to obtain a crisp value from a fuzzy membership function and determine the priorities by considering the degree of relation and the form of a matrix and weights for the severity, occurrence, and detectability. The proposed models prioritize the failure modes of the rotorcraft landing system. The conventional FMEA and fuzzy rule base can set the same priorities. SAM and GTM can set different priorities with objectivity through weight setting.

• Asian Journal of Innovation and Policy
• /
• 제7권1호
• /
• pp.79-102
• /
• 2018

In an entrepreneurial ecosystem, the failure rate of startups is extremely high at 90%, and every startup that fails becomes an orphan. This phenomenon leads to higher costs of failure for the entrepreneurs in the ecosystem. Failed startups have many lessons to offer to the ecosystem and offer guidance to the potential entrepreneur, and this area is not fully explored compared to the literature on successful startups. We use a case based method distinguishing a failed startup and a successful startup, studying the entrepreneurial characteristics and firm level factors which cause the failures, in the technology startup ecosystem of Bangalore. We study one of the modes of exit adopted by failed startup entrepreneurs and draw key lessons on causes that culminate in failures. We have identified that factors such as the time to minimum viable product cycle, time for revenue realization, founders' complementary skillsets, age of founders with their domain expertise, personality type of founders, attitude towards financial independence and willingness to avail mentorship at critical stages, will decisively differentiate failed startups from the successful ones. Accordingly, implications have been derived for potential entrepreneurs for reducing the cost of failures in the entrepreneurial ecosystem.

• Steel and Composite Structures
• /
• 제35권2호
• /
• pp.237-247
• /
• 2020

Shear connectors are essential elements in the design of steel-concrete composite systems. These connectors are utilized to prevent the occurrence of potential slips at the interface of steel and concrete. The two types of shear connectors which have been recently employed in construction projects are C- and L-shaped connectors. In the current study, the behavior of C and L-shaped angle shear connectors is investigated experimentally. For this purpose, eight push-out tests were composed and subjected to monotonic loading. The load-slip curves and failure modes have been determined. Also, the shear strength of the connectors has been compared with previously developed relationships. Two failure modes of shear connectors were observed: 1) concrete crushing-splitting and 2) shear connector fracture. It was found that the L-shaped connectors have less shear strength compared to C-shaped connectors, and decreasing the angle leg size increases the shear strength of the C-shaped connectors, but decreases the relative ductility and strength of L-shaped connectors.

• Earthquakes and Structures
• /
• 제21권5호
• /
• pp.505-514
• /
• 2021

A formulation based on structural reliability and cost effectiveness is proposed to provide recommendations to select the best retrofit strategy for schools with reinforced concrete frames and masonry walls, among three proposed alternatives. The cost calculation includes the retrofit cost and the expected costs of failure consequences. Also, the uncertainty of the seismic hazard is considered for each school site. The formulation identifies the potential failure modes, among shear and bending forces for beams, and flexure-compression forces for columns, for each school, and the seismic damages suffered by the schools after the earthquake of September 17, 2017 are taken into account to calibrate the damaged conditions per school. The school safety level is measured through its global failure probability, instead of only the local failure probability. The proposed retrofit alternatives are appraised in terms of the cost/benefit balance under future earthquakes, for the respective site seismic hazard, as opposed to the current practice of just restoring the structure original resistance. The best retrofit is the one that corresponds to the minimum value of the expected life cycle cost. The study, with further developments, may be used to develop general recommendations to retrofit schools located at seismic zones.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.325-333
• /
• 2020

As regulations concerning ship vibration and noise are becoming stricter, considerable attention is being drawn to prediction technologies for ship vibration and noise. In particular, the resonance and lock-in phenomena caused by vortex-induced vibration (VIV) have become considerably important with increases in the speed and the size of ships and ocean structures, which are known to cause structural problems. This study extends the fluid-structure interaction (FSI) analysis method to predict resonances and lock-in phenomena of high modes and VIV of ship rudders. Numerical stability is secured in underwater conditions by implementing added mass, added damping, and added stiffness by applying the potential theory to structural analysis. An expanded governing equation is developed by implementing displacements and twist angles of high modes. The lock-in velocity range and resonant frequencies of ship rudders obtained using the developed FSI method agree well with the experimental results and the analytic solution. A comparison with local vibration guidelines published by Lloyd's Register shows that predictions of resonances and lock-in phenomena of high modes are necessary in the shipbuilding industry due to the possible risks like fatigue failure.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.41-46
• /
• 2017

In this paper, from making an electrical fire which is thought to be the most damaging among potential dangers as a top event, minimal cut sets (MCS) about it were analyzed. For this, components of a power substation were classified into 15 items. Failure rates and modes were extracted based on Korea Electrical Safety Corporation, IEEE Gold Book, and RAC. To analyze the top event (an electrical fire), main events were assorted into "safety devices for overcurrent" and "ampere meter of detecter". Failure of components was divided into failure of VCB, COS, and MCCB. A fault tree was composed of 3 AND gate, 5 OR gates and 17 basic events. Overlapped events among the basic events are things which occur from relevant components. They were attached to the tree by distinguishing identifiers. In case of FT, two minimal cut sets of "IO_METER", "MF_METER", "DO_MCCB" and "IO_METER", "MF_METER", "DO_VCB" take 46% of electrical fires. Therefore, about basic events which are included in the top two minimum cut sets, strict control is necessary.