• Corrosion Science and Technology
• /
• 제16권5호
• /
• pp.235-240
• /
• 2017

Regional cathodic protection has significant impact on pipeline integrity management. After risk analyses of a newly built gas distribution station constructed in an area with large dwelling density, risk score was high because of potential threat caused by galvanic corrosion. Except reinforced steel in concrete, there are four kinds of metal buried under earth: carbon steel, galvanized flat steel, zinc rod and graphite module. To protect buried pipeline from external corrosion, design and construction of regional cathodic protection was proposed. Current density was measured with potential using potential dynamic test and boundary element method (BEM) was used to calculate current requirement and optimize best anode placement during design. From our calculation on the potential, optimized conditions for this area were that an applied current was 3A and anode was placed at 40 meters deep from the soil surface. It results in potential range between $-1.128V_{CSE}$ and $-0.863V_{CSE}$, meeting the $-0.85V_{CSE}$ criterion and the $-1.2V_{CSE}$ criterion that no potential was more negative than $-1.2V_{CSE}$ to cause hydrogen evolution at defects in coating of the pipeline.

• 한국환경과학회지
• /
• 제16권1호
• /
• pp.65-71
• /
• 2007

This study aims to estimate a urban heat island potential distribution based on the land-use types using Landsat TM(1100 LST August 2004) and AWS data in Daegu. The heat island potential is defined as a difference between surface temperature and air-temperature at each place. The study area was selected as about $900km^2$ square including Daegu metropolitan area. Land-use data obtained by dividing all of Daegu metropolitan area in- to 1-km-square three types of maps were prepared in the 1960s, 1970s and 2000s respectively. Land-use types were classified into 5 categories. Forest and farm lands have been reduced at a wide range during 40 years. Most of those changed into urban area. The heat island potential distribution presented a striking contrasts according to land-use types. For example, the heat island potential of urban area was higher than $10^{\circ}C$ in comparison to those of water or paddy rice areas.

• 한국농림기상학회지
• /
• 제18권3호
• /
• pp.109-119
• /
• 2016

본 연구는 우리나라의 대표 활엽수종 중의 하나인 신갈나무를 대상으로 기후변화에 의한 연도별 생장도일의 변화가 잠재분포 및 생장에 미치는 영향을 평가하기 위해 수행하였다. 이를 위해 신갈나무 분포 지역의 기후특성을 반영한 군집분석을 실시하였으며, 그 결과 7개의 기후군집으로 분류되었다. 각 군집에 포함된 시군에서 수집된 일평균기온 자료를 기반으로 1951년부터 2010년까지 60년 동안의 연도별 생장도일과 기온효과지수를 산출함으로써 시간 경과에 따른 신갈나무의 잠재분포 범위와 생장의 변화 추이를 평가하였다. 이와 함께 기후변화 시나리오 RCP 4.5와 RCP 8.5를 적용하여 2011년부터 2100년까지 연도별 생장도일과 온도효과지수를 산출하여, 기후변화에 의한 신갈나무의 잠재분포 범위와 생장의 변화를 예측하였다. 신갈나무가 현재 분포하고 있는 지역의 생장도일을 연도별로 산출하여 비교한 결과 위도와 해발고도가 낮은 지역은 시간이 경과함에 따라 신갈나무에 적합한 생육가능 범위를 벗어나는 것으로 분석되었다. 특히 기후변화 시나리오를 적용할 경우 지속적인 기온의 상승으로 인해 2050년 이후에는 잠재분포의 변화뿐만 아니라 생장에도 큰 지장을 주는 것으로 평가되었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.265-270
• /
• 2007

The potential and step voltage distribution around low voltage joint-box cover were simulated with the variation of resistivity of water, depth of submerged water and point of leakage current. The potential distribution is very high gradient around low voltage joint-box, this condition is very dangerous states.

• Ocean Science Journal
• /
• 제41권2호
• /
• pp.121-124
• /
• 2006

Argo drifters provide information of the vertical structure in the water column and have a potential for the improvement of understanding phytoplankton primary production and biogeochemical cycles in combination with ocean color satellite data, which can obtain the horizontal distribution of phytoplankton biomass in the surface layer. Our examples show that using Argo drifters with satellite-measured horizontal distribution of phytoplankton biomass at the sea surface allow an improved understanding of the development of the spring bloom. The other possible uses of Argo drifter are discussed.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.17-21
• /
• 1998

The surface potential distribution on insulating polymers was measured by scanning of the probe of an electrostatic voltmeter. The measurements were done for two measured by scanning of the probe of an electrostatis voltmeter. The measurements were done for two cases. In the first case, it was measured on the free surface of insulating films which had been inserted between plane electodes after the removal of the upper brass disk electrode. In the second case, we measured the charging region between a circular and its opposing concentric ring electrodes after the removal of dc ramp voltage in air and nitrogen gas.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.18-27
• /
• 1998

Molecular dynamicsinvestigations of ion implantation considering point defect generation were performed with ion energies in the range of ~1keV, Simulation starts perfect diamond cubic lattice site. Stillinger-Weber potential and ZBL potential were used to calculate forces between atoms. We have simulated slowing-down of ion velocity, ion trajectory and coupled-coing between ion and silicon. We also discussed distribution of point defect using rdial distribution function. We found that interstitial produced by ion bombardment mainly formed interstitial cluster.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.53-59
• /
• 2000

A numerical method to predict responses of very large floating structures in wave is suggested using source-dipole distribution method. The deflection of the plate is calculated by the finite element method in terms of rigidity matrix of each node. The calculated results for a plate are compared with the experimental ones.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.147-152
• /
• 1999

Distribution of fracture system is an important factor to analyse instability of jointed rock slope. In the most case of rock slopes, joint distribution properties are related to potential, shape, size and locality of slope failure. The purpose of this paper is to present an application of fracture characterization related to rock slope failure. Fracture data used in this study are collected by scanline survey. Two aspects of fracture characterization for rock slope are handled in this study First, In order to determine the potential and shape of slope failure, trace length of joints is considered as the weighting factor about collected orientation data. Second, Relationship between trace length and spacing is analysed to estimate failure location and size. The distribution of fracture system is directly influenced on wedge failure. It is effective to analyse the orientation of fractures by using weighting factors associated with the trace length of fractures rather than to analyse only that of fractures. It gives a conclusion that the wedge failure occurred along the peak of fracture density(or intensity) cycles.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.27-34
• /
• 2015

The correlation between crack propagation and localized recrystallization are compared in a series of cross section analyses on thermal cycled edgebond and underfilm material applied wafer level chip scale package (WLCSP) components with a baseline of no-material applied WLCSP components. The results show that the crack propagation distribution and recrystallization region correlation can explain potential degradation mechanisms and support the damage accumulation history in a more efficient way. Edgebond material applied components show a shift of damage accumulation to a more localized region, thus potentially accelerated the degradation during thermal cycling. Underfilm material applied components triggered more solder joints for a more wider distribution of damage accumulation resulting in a slightly improved thermal cycling performance compared to no-material applied components. Using an analysis on localized distribution of recrystallized areas inside the solder joint showed potential value as a new analytical approach.