• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.230-234
• /
• 2001

Traditional doenjang was fermented in different vessels, and its quality characteristics were investigated during ripening. Fermentation vessels used were dark brown glaze pot, dark brown glaze pot with glass lid and plastic box. Water content of doenjang decreased during fermentation, with doenjang pepared in dark brown glaze pot with glass lid showed the highest water content reduction. Water-soluble nitrogen content $(4.56{\sim}5.80%)$ was the highest at 8 months fermentation and amino type nitrogen content continuously increased until 12 months, with doenjang in dark brown glaze pot higher than those in plastic box. Sensory evaluation revealed the quality of doenjang fermented in plastic box was significantly lower than others after 4 months.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.6-6
• /
• 2009

자동차 운반용 선박(PCTC) 건조 시, 자동차를 고정시키기 위해 약 5 만 여개의 Lashing Socket(6,700 Units PCTC 기준)이 소요되는데, 이때 사용되는 Lashing Socket 은 용도 및 형태에 따라 Hole Cup, Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot, D-Ring, Crinkle Bar 등으로 구분된다. 이와 같이 다양한 종류 중에서 Hole cup 타입이 전체 적용되는 Lashing Socket 의 약 80%에 이른다. 기존에 사용되고 있는 자동용접장치는 Hole Cup 이외에는 적용이 불가능하고, 자석을 이용하여 Hole Cup 의 상부에 위치시키는 방식이었기 때문에 경량화 및 다양한 종류 및 크기의 Lashing Socket 에 적용이 가능한 자동용접장비의 개발이 요구되었다. 본 연구에서는 두께가 다른 $\phi$140 Hole Cup 및 Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot 에 적용 가능하며, 분리형 용접캐리지와 Centering Template, Magnet Jig 로 구성된 연속 및 단속 용접이 가능한 자동용접장치를 연구 개발하였다. 이를 통해 종래 Hole Cup 전용 자동용접 캐리지의 문제점을 개선하여, 작업자가 Centering Template 과 Magnetic Jig 을 이용하여 캐리지를 Hole Cup 의 중앙에 위치시키기 용이하게 하였다. 이 같은 분리형 장치 구성을 통해 Hole Cup 중앙에 캐리지 고정 작업과 용접 작업을 분리함으로써 자동용접이 진행되는 도중에 여분의 Jig를 이용하여 다른 Hole Cup 에 용접 준비를 하여 연속적인 작업이 가능하도록 하였다. 본 연구는 종래의 Hole Cup 전용 자동용접 캐리지의 문제점을 개선한 분리형 용접 캐리지를 개발함으로써 아래와 같은 결과를 얻었다. 1. 용접 캐리지를 포함하여 각 부분별 분리를 통해 작업자가 1 회 이동 시 필요로 하는 중량을 감소시켜 장비의 이동 및 제어가 쉽다. 2. Magnetic Jig 를 Centering Template 에 결합하고, Template 의 Jig 를 Lashing Socket 에 결합함으로써 손쉽게 Lashing Socket 의 중심부를 찾을 수 있으므로 용접 캐리지의 정확한 센터 고정이 가능하다. 3. 엔코더에 의한 1 회전을 검출함으로써, 작업 종료 후, 어떤 위치에서나 작업 재개가 가능하며 원점 복귀 작업이 불필요하다. 또한 엔코더에 의한 거리 설정으로 용접 속도에 상관없이 동일한 거리만큼 오버랩 용접이 가능하다. 4 디지털 방식으로 용접 조건의 입력이 가능하고, 용접 조건을 D/B 화 함으로써 Control Panel 상에서의 자동 제어가 가능하다. 이를 통해 연속 용접 또는 단속 용접이 가능하므로 다양한 형태의 Lashing Socket 을 자동 용접할 수 있는 효과가 있다. 이상의 결과를 통해 본 장비가 Fig.2 의 3 가지 종류의 Lashing Socket 용접에 효과적인 장비임을 확인할 수 있었다.

• Journal of architectural history
• /
• v.24 no.6
• /
• pp.57-66
• /
• 2015

As Sri Lanka Stupa had been affected by Indian stupa directly, understanding Sri Lanka Stupa is important to know about the flow of Buddhist Art History, which is showing the variation of Initial Buddhist stupa. Due to invasions and disasters, all Sri Lanka's Stupa collapsed and became random mound. After restoration works, Stupa shape changed dramatically from the Initial shape to Existing shape. Since it is hard to find out how Initial stupas were like, Sanchi Stupa needed to be an example for the comparative study as an Initial shape. Sri Lanka Stupa have Square foundation and 3 Basal rings that are supporting the Main Dome. Entrances are on all 4 sides, Railing and Torana(gate) has never found in Sri Lanka stupa. Sri Lanka stupa has been classified with the shape of Dome into 6~8 types according to "Vijayanta Potha", the Ancient Buddhist Description, and described by several researchers confusingly. With the inconvenience of using unfamiliar words and irrational gap between the Initial Sri Lanka stupa and Existing Sri Lanka stupa, proposing new classification of Sri Lanka Stupa is necessary. Existing Sri Lanka Stupa can be classified into 4 types : which is (1)Bell type, (2)Pot type, (3)Mound type, (4)Bubble type. This suggestion is for further studies to use Easier and shorter words to describe the types and make it reasonable to use, since the current classification includes 3 stupa types even there is no case for any of them. Restrict Stupa Classifications within existing Sri Lanka Stupa is needed because the current classification had been continued for hundreds of years without any adjustments. Bell type is mainly located in Anuradhapura. Pot type and Mound type is only found in limited area, and Bubble type is located in most area of Sri Lanka.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.358-358
• /
• 2017

The plant type is generally one of the most important factor for crop production and be influenced by nitrogen absorption. Soybean plants have nodules in their roots, supplying nitrogen at the vegetative and reproductive stages. Root nodules seem to effect plant type of soybean plants, but there are few reports on the relation nodules and plant type. We tried to clarify the effects of root nodules on the plant type, especially internode length and petiole length, comparing non-nodule soybean with normal soybean. The pot experiment and field experiment were carried out at Mie University and Utsunomiya University in 2015 and 2016. Enrei, a popular cultivar in central Japan, and En1282, non-nodulating isogenic line of Enrei, were used. The petiole length on main stem was measured after defoliation and internode length and yield components were measured after harvest. In the field experiment, the patterns of the final length in internode and petiole on main stem were consistent in both cultivars, and a positive correlation was found between the Nth petiole length and the N-1th internode length, belong to the same phytomere. Therefore, the petiole and internode on the main stem make similar response for environmental factors. In pot experiment, Enrei grew with the same pattern as field experiments, but in En1282, the elongation of petiole and internode in the upper part was suppressed, especially the petiole was suppressed greatly. The main stem becomes the basis of the plant type. These results were considered that the nitrogen is distributed preferentially to the internode than the petiole. It seems that the pot cultivation restricted the rhizosphere and caused nitrogen deficiency in En1282. These results suggested that the slight nitrogen deficiency provided from the root nodules was compensated by the increase of the amount of inorganic nitrogen absorption due to the expansion of the rhizosphere, and the severe nitrogen deficiency suppressed elongation of petiole and internode. It is clear that root nodules effect the plant type by supplying nitrogen to internodes and petioles.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.138-146
• /
• 2011

This study was carried out to select salt tolerant zoysiagrass breeding lines. Eighty two native zoysiagrasses collected from S. Korea were used in this study. Saline water were prepared by mixing sea water and tap water. ECw levels of saline water treated ranged from 2 to $3dS{\cdot}m^{-1}$. Zoysiagrass planted in pot by sprigging were soaked into the plastic box containing saline water. Winter injury was investigated under the pot condition. Most of Z. japonica types did not show winter injury. But Z. tenuifolia type, Z. matrella type, and Z. sinica type showed winter injury under the pot condition at Cheonan area. NaCl level in soil was increased from 0% to 0.51% by treatment of saline water. Soil ECe measurement showed upto $170dS{\cdot}m^{-1}$. Z. tenuifolia type (Z5034), Z. matrella type ('Konhee', Z4109, 'Semill'), Z. japonica type (Z1055, Z1040, Z1008, 'Zenith', 'Millock') and medium leaf type zoysiagrass (Z6096, Z6118, Z6021, Z6074) resulted in below 30% leaf firing under the saline condition. This approach might be useful for selecting salt tolerant breeding lines.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.368-377
• /
• 2017

This study investigated the possibility of application of the recently introduced cylindrical paper pot seedlings in hot pepper (Capsicum annuum L.) cultivation. The seedling growth, initial rooting after planting and accumulated fruit yield were investigated with the treatments of tray type (paper pot and plug) as a main factor, tray cell number (40 cell and 50 cell) as a sub-factor, and fertigation method (continuous fertigation and fertigation after 35 days sowing) as a sub-sub factor, respectively. The growth of pepper seedlings was significantly affected by tray type and fertigation method showing the highest value at 50 cell plug tray with continuous fertigation, and the effect of fertigation was greater than that of trays. 'Cheongyang', 'Daekwonseoneon' and 'Longgreenmat' cultivar showed all the same pattern in seedling growth. These three-cultivar seedlings were planted in plastic house and in open field in Jeonju area, respectively, and another 'Daekwonseoneon' seedlings raised Yeongyang local area was also planted at the same area. There was no difference in the rooting of 'Cheongyang' pepper at 2 weeks after planting in plastic house. The accumulated fruit weight was not significantly different between paper pot seedlings and plug seedlings in three cultivar grown in plastic house. However, that of 'Cheongyang' pepper showed higher at paper pot seedlings than plug seedlings and the other two cultivar were higher at plug seedlings in open field. 'Daekwonseoneon' pepper yield grown in open field in 'Yeongyang' area was not significant between paper pot seedlings and plug seedlings. In conclusion, the pattern of seedlings growth grown in the cylindrical paper pot was the same as those of the conventional plug seedlings and also fruit yield was similar between paper pot seedlings and plug seedlings even though minute difference among cultivars. These results suggest that pepper seedlings grown in paper pot should be highly applicable to pepper cultivation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.222-225
• /
• 2001

In urban environments, the surface land impermeability fundamentally related to urban growth emphasizes the environmental problems such as the storm water peak flow (so-called the urban flooding) and the pollution. The conventional urban drainage system provides a number of temporary reservoirs intercepting and retaining surface-derived pollutants following their introduction to and deposition upon the impermeable surface. Gully-pots are common features in urban drainage systems in Korea, which were installed for draining rainwater to prevent regurgitation in rainy season and retaining larger particles, hence minimizing pipe blockage problems. When the road runoff conveying sediment enters a gully-pot, the sediment mixes with the gully liquor causing direct pollution of receiving waters. The characteristics of local sediment contamination are usually related to the types of land use activities that take place or have taken place within the area., This study was undertaken to evaluate the spatial and temporal variations of the contamination of gully-pot sediments in Seoul with respect to heavy metals such as As, Cd, Co, Cr, Ni, Pb, Cu and Zn. The heavy metal data were examined according to the land use type. In this paper, sampling sites in Seoul were divided into six groups (commercial area, industrial area, residental area, motor way, rural area, and local pollution).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.1-8
• /
• 2000

This study is conducted to evaluate the effects of root restriction on growth of maple(Acer palmatum Thumb.). Tow types of container such as clay pot(CP), root control bag(RCB) were used to restrict maple's root and each type of container was divided into 5 sizes. The containers with plants were buried just below the soil level and maples planted directly in the soil (nonrestricted root treatment) were included as comparison. Data were collected on dry weight of leaf, trunk, thick root, rootlet and soil water potential. We have analyzed, simple linear regression, Pearson's Correlation analysis, Duncan's multiple rang test, and Covariance Analysis using SAS statistical software. The results of analysis based on these data are as follows; 1. Total dry weight of maple in CP was significantly larger than in RCB. 2. Difference in growth reduction by the kinds of containers was induced by different hydraulic diffusion ratios between container and soil. Difference in growth reduction by the size of container was induced by the difference density of rootlet and soil moisture contents in the container. 4. Commercial products of root control of root control bag appeared not proper for countries in which fluctuation of rainfall is severe. Because maples in RCB were restricted by excess soil water in the rainy season, or by lack of soil water in the dray season.

• Journal of the Korean Chemical Society
• /
• v.48 no.3
• /
• pp.266-272
• /
• 2004

We developed a miniaturized solid-state carbonate ion-selective electrode (carbonate ISE) based on one-component room temperature vulcanizing type silicone rubber 730 (730 RTV) without adding plasticizer to the matrix. The optimized carbonate ion selective membrane is prepared with 85.8 wt% of 730 RTV, 11.1 wt% of trifluoroacetyl-p-decylbenzene (TFADB), and 3.1 wt% of tridodecyl-methylammonium chloride (TDMACl). This carbonate ISE exhibited excellent potentiometric properties (i.e., slope: 26.3 mV/dec; selectivity: $logKT^{pot}_{CO_{2},Cl^-}$= -4.00 and $logKT^{pot}_{TCO_{2},Sal^-}$=1.69); and detection limit for $TCO_2:\;4.0{\times}10^{-4}M$). In addition, the early potentiometric properties of the solid-state sensor with optimized membrane composition were not deteriorated for more than 60 days.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.309-314
• /
• 1990

A pot experiment was carried out to find the effects of chemicals and its application time on the sterility and other agronomic characters of rice. Two rice cultivars, Samgangbyeo, a Tongil type, and Chuchungbyeo, a japonica type rice were treated with maleic hydrazide (6000ppm), ethephon (6000ppm) and GA3 (10ppm) at five different growth stages. The application times of chemicals were comprised of two different stages of stem elongation and booting and panicle emerging stage. Grain sterility and panicle length were measured for panicles per pot. Culm length was measured for pot basis. MH induced complete grain sterility in rice, but caused severe plant damage (phytotoxicity) ; restricted spike emergence and drying out of plant leaves, sheath and panicles. Ethephon induced 50-60% grain sterility in rice with the least in plant damage. GA3 was not effective in inducing grain sterility in rice, but it increased culm length. The earlier application of chemicals, the higher sterility was induced. Both MH and ethephon reduced culm length and grain yield. Also observed was the varietal response in the occurrence of to chemicals Samgangbyeo showed the higher response to chemicals than Chuchungbyeo.