Kim, Mi-Seon;Cho, Hae-Ryong;Rhee, Hye-Kyung;Lim, Jin-Hee;Lee, Young-Ran;Shin, Hak-Ki
Korean Journal of Breeding Science
/
제41권3호
/
pp.358-362
/
2009
A New Cymbidium variety "Yellow Evening" was developed from a cross between "Oji" and "Valley Flower Cherry Life" followed by seedling and line selections at the National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA) in 2004. After investigation of the characteristics and selection for 9 years (1996-2004), it has been selected specifically pot orchid flower. "Yellow Evening" has medium plant height and semi-erect peduncle. It has medium flowering habit and brownish yellow flowers (RHS, Y11B: petal and sepal) with grayed purple GP183A) spot on lip, when fully opened. Each peduncle has 15.3 flowers with diameter of about 7.4 cm. It has adequate peduncle height, with some curved and spreading petal and sepals. Under optical culture conditions, it started to bloom early-winter (November).
We investigated the ecological characteristics of reed populations growing in Korea and tried to select reed populations showing better growth patterns in waste landfill leachate. To examine the growth characteristics, 14 reed populations from various habitats were collected. Four reed populations were from inland reclaimed habitats, 4 reed populations from brackish or salt marsh habitats, and 6 reed populations from fresh water habitats. Total plant biomass after the treatment with landfill leachate showed that Daebudo and Nanjido reed populations had the higher biomass with 3755 g DW/pot and 3305 g DW/pot, respectively. Reed populations being sampled from the higher salinity and landfill habitats had relatively higher total biomass than that of other reed populations. Especially reed populations from landfill habitats showed higher biomass. Reed populations from Songjiho and Daebudo, which were believed to have tolerance to salt stress, also showed good growth patterns. Population from the fresh water habitats exhibited relatively lower tolerance to leachate treatment compared to others. From the results, we could conclude that reed populations from Nanjido and Daebudo with higher biomass and better salt tolerance were able to good candidates for purification of waste landfill leachate.
The text of 'Jeungbosallimgyeongjae' was reviewed to study the manufacture of vinegar and to investigate the changes made to the manufacturing process over time, other works such as 'Eumsigdimibang(1670s)', 'Sallimgyeongjae(1715)', 'Gyuhapchongseo(1815)', 'Juchan(1800년대경)' and 'Chosun-mussangsinsikyorijaebeop(1930)', 'Chosun-eumsikmandeneubeop(1946)' were compared. In both 'Eumsigdimibang', and 'Sallimgyeongjae' there are only three statements on vinegar manufacturing theory. For 'Sallimgyeongjae' these statesments are recorded specifically in the 'Chison' section. This book contains the following topics: the proper number of days for vinegar fermentation vinegar storage theory, how to maintain the vinegar in the pot, and nine vinegar manufacturing theories. 'Gyuhapchongseo' discusses the proper or improper number of days to ferment vinegar, and offers four general theories on vinegar manufacture. 'Ju-Chan' is a book of recipes from the latter era of the Chosun Dynasty. There are three statesments on 'yangchobang' recorded in this book. 'Chosun-mussangsinsikyorijaebeop' contains a general summary on vinegar that includes the theory of vinegar production, the right number of days for fermenting vinegar, clues for maintaining the vinegar in the pot, the method for making vinegar from spoiled alcohol, and finally, how to keep vinegar from molding The book also includes 11 statesments on the theory of vinegar manufacture. In 'Chosun-eumsikmandeneubeop', there are two statesments on vinegar manufacturing theory recorded. To study the use of vinegar in cooking as well as the change in manufacturing theories over time, we selected 'Eumsigdimibang', 'Sallimgyeongjae', 'Gyuhapchongseo', 'Chosun-mussangsinsikyorijaebeop' for a comparative analysis with the book 'Jeungbosallimgyeongje'. From this comparison of the texts we were able to learn the scientific nature of traditional foods. In addition, current vinegar manufacturing practices are changing the originally enjoyed flavors ghat are found with traditional vinegars. By the investigation of historic recipe book 'Ju-Chan,' and given the regular use of vinegar on cooking, we have found the means to reproduce the relished tastes of the past.
This study investigated elementary school students' perception and recognition of soybean foods and assessed their intake levels of isoflavones. A survey was administered to 300 sixth grade students in Daegu. The amount of isoflavones consumed by students was estimated by food intake frequency and the 24-hour recall method based on their general dietary habits and perception of soybean foods. Subjects' mean height was 152.2 cm, mean weight was 45.2 kg, and body mass index was $19.4kg/m^2$. All subjects had knowledge of soybeans and most preferred bean-paste pot stew of all soybean-based foods. Students typically ingested isoflavones two or three times per week in the forms of tofu, bean-paste pot stew, and bean sprouts. The average amount of isoflavones consumed from soy foods was 26.43 mg/day (daidzein 9.27 mg/day and genistein 17.16 mg/day) as assessed by food frequency questionnaire and 30.83 mg/day (daidzein 13.63 mg/day and genistein 16.40 mg/day) by the 24-hour recall method, showing that the 24-hour recall method assessment amount was 4.4 mg higher than that of the food frequency questionnaire. The major food sources of isoflavones were soybean paste and soybeans. Those who were especially knowledgeable about soybean foods expressed the view that these sources were a good or affordable enriched source of isoflavones.
The effects of sludge and fertilizer application on germination and seedling growth of woody plants on heavy metal mine tailings were evaluated by greenhouse experiment. Two different mine tailings (Lead-zinc mine tailings from Kwangmyong, Kyonggi-do and tungsten mine tailings from Sangdong. Kangwon-do). four fertilizer treatments (N +P +K: 20, 40, 60, and 80 kg/m$^3$), and four sewage sludge treatments (5.5, 11, 22.5, and 45 Mg/m$^3$) were used in the experiment. Tested plants were Pinus densiflora, Larix leptolepis, Amorpha fruticosa, and Alnus hirsuta. There were three replicates for each treatment. In addition, vermiculite was used instead of mine tailings to determine the effect of physical amendments. Fifty seeds of a species were sown in a pot (upper diameter 13.5 cm, depth 10 cm) and seedling emergence were recorded daily for 30 days. The highest germination rate was 53% for all treatments. Germination rate of Larix leptolepis was lowest among the four species studied. One month later after seeding, seedlings were thinned and only 5 seedling were left in each pot, and fertilizer and sewage sludge were applied once again. Growth of seedlings were determined for 10 weeks since then. Most plants grew very poorly or died within 5 weeks on lead/zinc mine tailings from Kwangmyong. The analysis of heavy metal contents by the total dissolution method showed that heavy metals generally increased in the order of tungsten mine tailings from Sangdong < sewage sludge from Puchon < lead/zinc mine tailings from Kwangmyong. Growth of woody plants was improved significantly by the fertilizer treatments on tungsten mine tailings. In contrast. survival and growth of woody plants were not affected significantly by the sewage sludge treatment on both tailings. This study shows that fertilizer applied to established seeded stands may provide some benefits in terms of increased ground cover in the field. It is suggested that reclamation should be proceeded by the study of the physico-chemical and biological characteristics of mine tailings.
Journal of Advanced Marine Engineering and Technology
/
제22권2호
/
pp.139-145
/
1998
Filament winding method is widely used for composite fabrications using low viscosity liquid for-mation and processing asymmetrical structures of pressure vessel pipe rocket motor case etc. The filament winding method is affected by several parameters such as pot life of process time viscosi-ty of resin filament winding temperature and schedules curing condition and post curing condi-tion of resin. To develope high functional composite materials the rotation(5, 15, 20, 30rpm) of the winding machine was controlled by D.C motor. And the wiper to give proper tension was equipped between strand and resin bath. The resin is hooked by the design wiper. The adequate cure schedule was found by DSC. NOL ring test is carried out to investigate the basic physical properties such as design technology. The void contents in filament winding is generally higher than that of the prepreg laminated plate. These high contents of void can make a crack in resin in spite of low deformation. These problem was solved by giving tension in processing. To improve the characteristics of fiber volume fraction void contents resin/fiber bonding the winding speedc is changed under constant tension. It was found that resin impregnation was not different from in fiber contents void contents at the range of 0.5~1kg tension but it was found that resin was not impregnated at the above of 1.5kg tension. In burst test a pure PE liner was failed at a nozzle part under the $14kg/\textrm{cm}^2$ pressure but a pressure vessel of CNG was failed at a cylinder part under the $200kg/\textrm{cm}^2$ pressure.
Benzoic acid polyester/lactone polyol were synthesized by polycaprolactone 0201 as diol, trimethylolpropane as triol, adipic acid as dibasic acid, and benzoic acid as monobasic acid. Polyisocyanate prepolymer Desmodur N-100 of HDI-biuret type was used in this study. Two-component polyurethane coatings were prepared by blending benzoic acid polyester/polycaprolactone, polyisocyanate, wetting/dispersing agent, white pigment, and flowing agent. Various properties were examined on the film coated with the prepared polyurethane. They showed excellent physical properties such as abrasion resistance, accelerated weathering resistance, and yellowness index. They also showed good physical properties such as flexibility, impact resistance, 60$^{\circ}$ specular gloss, cross hatch adhesion, hydrocarbon resistance, and lightness index difference. Hardness of coating showed a little poor character. The introduction of polycaprolactone 0201 as diol in the polyurethane coatings improved the hydrocarbon resistance, impact resistance, and flexibility of coatings. According to the drying and curing behavior with the contents of benzoic acid, they seem to have reasonable coating properties such as drying time of 2 to 4 hours and pot-life time of 20 to 37 hours.
(1) 탄성체(彈性體) MBMA를 가황제(加黃劑)로 사용한 가황체(加黃體)는 MOCA를 가황제(加黃劑)로 한 것 보다 Pot life가 긴 것이 특징(特徵)이다. 물리적(物理的) 특성(特性)에 있어서는 2가지 공(共)히 비승하였으나, 내열성(耐熱性)은 MOCA의 경우가 더 우수(優秀)하였다. 인장강도(引張强度), 신장률(伸張率), 반발탄성(反潑彈性)에 있어서는 MBMA를 사용(使用)한 가황(加黃體)와 MOCA를 사용(使用)한 가황체(加黃體)가 동일(同一)하였으나 압축(壓縮)줄음율은 전자(前者)가 높았다. 인열강도(引裂强度)에 있어서는 10부(部)의 MBMA를 가(加)했을 때 후자(後者)와 동일(同一)하였다. 또 MBIA 가황제(加黃劑)를 사용하였을 경우 인장강도(引張强度), 신장률(伸張率) 그리고 반발탄성등(反潑彈性等)이 MBMA 또는 MOCA의 경우와 거의 동일(同一)하였으나 고무가 부드러운 것이 특징이었다. 다만 100% 모듈러스의 경우 전자(前者)가 후자(後者)들보다 낮은 값이었다. NCO와 OH의 비(比)가 2 : 1인 Prepolymer를 사용한 MBIA가황체(加黃體)(MBIA를 가황제(加黃劑)로 한 가황체(加黃體))는 MBMA 가황체(加黃體) 또는 MOCA 가황체(加黃體)에 비(比)해 인열강도(引裂强度)는 낮았다. 그러므로 인열강도(引裂强度)를 향상(向上)시키기 위하여 NCO와 OH의 비(比)를 2 : 1보다 높은 비율(比率)로 취(取)하면 된다. 내열성(耐熱性)에 있어서 MBIA가황체(加黃體)가 MOCA가황체(加黃體)보다 우수(優秀)하였 고 또 배합작업(配合作業)에 있어서도 MOCA나 MBMA 가황체(加黃體)보다 작업성(作業性)이 용역(容易)하였는 바 이같은 이유(理由)는 전자(前者)의 녹는 점(點)$(70^{\circ}C)$이 후자(後者)들보다 낮기 때문이다. MBIA의 기타(其他) 특성(特性)으로서는 Pot life가 MOCA가황체(加黃體)보다 2.5배(倍) 길었다. 끝으로 MBEHA와 MBCHA가황체(加黃體)의 특징(特徵)은 가황속도(加黃速度)가 MBIA가황체(加黃體)보다 느림과 동시(同時)에 고무자체(自體)가 부드러웠을 뿐만 아니라 물리적(物理的) 특성(特性)도 좋지 않았다. (2) 미세구조용(微細構造用) 포옴라버 미세구조용((微細構造用) 포옴라버를 제조(製造)할 경우 이때까지 사용(使用)해온 MOCA가황제(加黃劑) 대신(代身) MBMA를 가황제(加黃劑)로 대체사용(代替使用)이 가능(可能)한 바, 이를 사용(使用)하였을 때의 물리적(物理的) 특성(特性)은 MOCA를 사용(使用)하였을 때 보다 인열강도(引裂强度), 신장률(伸張率) 그리고 열안정성등(熱安定性等)은 월등(越等)히 우수(優秀)하였다.
This study was conducted to select an optimal approach to corn waste biochar (BC) application, and to evaluate the effects of combined application of BC and inorganic fertilizer (IF) on corn growth and soil chemical properties in a pot experiment. Corn growth differed with BC application timing and BC application levels. Based on the characteristics of corn growth in pot-based experiments, the selected optimal application conditions of BC were application of $500kg\;10a^{-1}$ at 20 days before sowing. Also, the chemical properties of the tested soil with BC after corn harvesting were significantly improved than those in the other treatments. In particular, soil pH and CEC regardless of application conditions were markedly increased by 0.04~0.19 units and $0.08{\sim}2.58coml_c\;kg^{-1}$ in BC treatments than without BC treatments. Additionally, combined application of BC and IF had greater effects on corn growth than single application of BC. Therefore, the results suggest using properly BC application conditions and a combination of BC and IF for effective corn cultivation in an upland field.
Three soybean cultivars, Hwangkeum, Tanyeob and Enrei were planted in the same pot under glasshouse conditions to investigate the influence of the different soil water content such as pF 1.4(wet), 2.1(control) and 3.6(dry) on the transpiration rate, dry matter production and water requirement. The transpiration rate remained the high constant rates under the wet soil condition and the control than the dry condition, and showed a linear correlation between transpiration rate and solar radiation under the all condition of soil water. The transpiration rate highly increased in the morning, but dramatically decreased in the other time in a day. The dry matter production was higher under the conditions of wet soil and the control than that under the dry condition. Also, the dry matter production Tanyeob was higher than other cultivars under all soil water content. The water requirement was higher for Enrei and lower Tanyeob than the control.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.