• The Journal of the Korean dental association
• /
• v.53 no.11
• /
• pp.844-854
• /
• 2015

This clinical report describes an orthodontic-prosthodontic interdisciplinary treatment for a patient with multiple missing teeth and unilateral scissors bite. A 47-year-old female presented with multiple missing posterior teeth, anterior large overjet, deep bite, and posterior scissors bite on the right premolar area. Periodontal therapy was performed and followed by orthodontic treatment. The maxillary anterior teeth were initially aligned, then two implants were placed for the left mandibular molars to increase occlusal vertical dimension. The scissors bite between the right maxillary and mandibular premolars were corrected using the miniscrews as an anchorage. Other implants were placed for the right maxillary and mandibular molars after the occlusal planes and occlusal relationship were harmonized. The patient adapted well to altered vertical dimension without any specific problems including peri-implant marginal bone loss. Interdisciplinary approach resolve the complex orthodontic-prosthodontic problems and concluded in successful results.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.260-269
• /
• 2019

The prolonged neglect of the posterior teeth missing area may cause mesial drift, extrusion, unexpected movement of the adjacent teeth and alveolar bone loss with occlusion collapse. Therefore it is recommended to treat that area by the prosthesis as soon as possible after tooth missing. However, if orthodontic treatment is applied to move the remained teeth, it can create improved biomechanical dentoalveolar environment. The use of the third molars in teeth missing area provides advantages as optimizing of prosthesis size. However, crown shape, location, soundness of the third molar and possible of eruption failure should be considered. In this case report, two patients closed a second teeth missing site and reduced the size of the first and second teeth missing area for an implant by protraction of impacted third molars. This case reports the considerations for closing or reducing the posterior teeth space with protracting the third molars by comparing two patients.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.143-150
• /
• 2004

Endosseous implants have been used to provide anchorage control in orthodontic treatment without the need for special patient cooperation. However these implants have limitation like space requirement, cost, equipments. Recently titanium micro-implant for orthodontic anchorage was introduced. Micro-implants are small enough to place in any area of the alveolar bone, easy to implant and remove, and inexpensive. In addition, orthodontic force application can begin almost immediately after implantation. The mandibular first, maxillary first, mandibula second, and maxillary second molars were the four most commonly missing teeth in adult sample. In case of posterior molar teeth missing, deflective contacts in any position, over time, has produced pathologic change of occlusal scheme because of extrusion of opposing teeth. This case had interocclusal space deficiency by mandibular right molars missing over time. The micro-implants had been used for intrusion of maxillary right molars for interocclusal space. The micro-implant would be absolute anchorage for orthodontic movement. Therefore, the micro-implant would be effective method for correction of occlusal plane.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.9-14
• /
• 1968

A total of 11,039 permanent missing teeth and their 2,696 prosthetic replaced teeth in 6,123 Korean patients were selected for this study, Analyzing the data according to age, sex, jaw and the location, following results were obtained. 1. Tooth mortality and replacement were higher in female than in male. 2. Replaced teeth were only 24 percent of missing teeth. 3. More teeth were extracted and replaced on lower jaw in young patients and on upper jaw in old patients. 4. There are no significant difference in right and left sides of both jaws in missing and replaced teeth, respectively. 5. First molar was the highest percentage in both mortality and replacement. 6. Upper tooth mortality and replacement were higher in anterior portion and lower in posterior portion.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.329-338
• /
• 2014

Patients who lost molars from dental caries or periodontitis have difficulty in maintaining their vertical dimension because their incisors and premolars also show vertical tooth movement. Missing posterior molars leads to occlusal interference and collapse of occlusal plane due to extrusion of opposite teeth and tipping of adjacent teeth. When this condition persists over long time, mandible moves forward, so it causes mobility and labioversion of upper incisors. This progress cannot be stopped spontaneously and the situation gets worse and worse. Therefore, for a patient with pathologic teeth migration caused by chronic periodontitis, interdisciplinary approach which is including periodontal treatment, orthodontic teeth alignment and prosthetic restoration of missing molars is required. This case report shows successful multidisciplinary approach to a patient who lost vertical dimension due to severe dental caries and periodontitis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.429-449
• /
• 1996

An objective definition of the anomaly is not avaliable and most investigators define the term differently or fail to describe their criterion. Because dental anomaly may lead to many complications, early detection and diagnosis of dental anomalies are essential steps in the evaluation of the child patient and in treatment planning. These procedures require detailed medical and dental histories, through clinical examination and the use of radiographs. So, this study was designed to find out the prevalence of dental anomalies. The clinical and roentgenographic examination was undertaken for 8,054 children at age from 0 to 15 years and statistical analysis was done. The results were as follows : 1. Among the examined subjects, 2,134 subjects(26.5%) showed dental anomalies. The prevalence of individual dental anomalies were as follows : supernumerary teeth 15.6%, congenitally missing teeth 6.6%, fusion 2.2%, odontoma 0.35%, microdontia 1.2%, macrodontia 0.05%, gemination 0.22%, talon cusp 0.36%, dens evaginatus 0.24%, dens invaginatus 0.15%, dilaceration 0.27%, taurodontism 0.09%, abnormal tooth position 1.7%, natal & neonatal teeth 0.92%, amelogenesis imperfecta 0.01%. 2. Significant correlations between the groups with individual dental anomalies were as follows : between group I and other groups, there was negative correlation, especially group I and group II. And the correlation coefficient between male and female showed differences. 3. For the supernumerary teeth group, the prevalence of male was higher than female(p<0.001). While for the congenitally missing teeth, macrodontia, microdontia, abnormal tooth position group, the prevalence of female was greater than male(p<0.001). 4. For the congenitally missing teeth group, the mandibular primary lateral incisor showed the highest incidence in primary dentiton, while mandibular lateral incisor in permanent dentition. In the mandible(72.5%), this site showed higher prevalence than in maxilla. In the case with deciduous congenitally missing teeth, the prevalence of successive permanent congenitally missing teeth was about 33.9%, the incidence was highest in mandibular lateral incisors. 5. Most supernumerary teeth existed on middle area and showed inverted position and unerupted state. In addition, supernumerary teeth showed higher incidence on maxilla (99.3%). 6. In the case with deciduous fused teeth, the prevalence of successive permanent congenitally missing teeth was 39.9%, while that of successive permanent fused teeth was 2.7%. And the highest rate of the prevalence (40.3%) appeared in fusion of mandibular deciduous lateral incisor and canine. 7. In the case of odontoma, the prevalence was higher in maxilla(78.6%) and anterior region(82.7%) than mandible and posterior region.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.3
• /
• pp.186-199
• /
• 2012

Purpose: Single implants, of which screw loosening has been observed frequently, presents problems such as fixtures fractures, marginal bone loss, and inflammation of the soft tissue around the implant. However, the single implant is more conservative, cost effective, and predictable compared to the 3 unit bridge with respect to the long-term outcome. This study evaluated the survival rate as well as future methods aimed at increasing the survival rate in single implants in posterior teeth. Methods: Among the implants placed in the Dankook University Dental Hospital department of Oral & Maxillofacial surgery from January 2001 to June 2008, 599 implants placed in the maxillar and mandibular posterior were evaluated retrospectively. Survival rates were investigated according to implant location, cause of tooth loss, gender, age, general disease, fixture diameter and length, surface texture, implant type and shape, presence of bone graft, surgery stage, surgeons, bone quality and opposite teeth. Results: Out of 599 single implants in posterior teeth, 580 implants survived and the survival rate was 96.8%. The difference in survival rate was statistically significant according to the implant location. The survival rate was low (84.2%) in implants exhibiting a wide diameter (${\geq}5.1mm$) and the surface treated by the acid etching group demonstrated a significantly lower survival rate (91.1%). One stage surgical procedure, which implemented a relatively better bone quality survival rate (100%), was higher than the two stage surgical procedure (96.1%). The survival rate of type IV bone quality (75%) was significantly lower than the other bone quality. Conclusion: Single posterior teeth implant treatments should use an improved surface finishing fixture as well as careful and safe procedures when performing implant surgery in the maxilla premolar and molar regions since bone quality is poor.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.180-187
• /
• 2015

Incontinentia pigmenti, also called Bloch-Sulzberger syndrome, is a rare X-linked inherited dominant disorder that affects females, but causes spontaneous abortion of prenatal males. Incontinentia pigmenti is a systemic disease with clinical features similar to ectodermal dysplasia, including congenitally missing teeth. The pathogenesis is related to gene mutations in NF-kappa-B essential modulator on chromosome Xq28. Incontinentia pigmenti is caused by a defect in the developmental stage of organs originating from the ectoderm or mesoderm and involves the skin, eyes, hair, teeth and central nervous system. This report discusses the management of three cases of 3 to 5 years old females with incontinentia pigmenti and accompanying multiple missing teeth. The cases had sparse hair, and showed oligodontia and anomalous crowns with supplementary cusps in the posterior teeth and conical anterior teeth. Removable space maintainers were applied, achieving improved esthetics, recovery of mastication and increased self-esteem in the patients.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.2
• /
• pp.54-57
• /
• 2010

PURPOSE. The aim of this study was to evaluate the periodontal and prosthodontic complications of multiple freestanding implants in the posterior jaws for up to 1 year of function. MATERIALS AND METHODS. Eight patients received 20 implants posterior to canines. Two or more implants were consecutively inserted to each patient. Single crowns were delivered onto the implants. Marginal bone loss, implant mobility, probing depth, and screw loosening were examined to evaluate the clinical success of such restorations for maximum 1 year of functional loading. RESULTS. All the implants performed well during the observation period. Neither periodontal nor prosthodontic complications were found except a slight porcelain chipping. While the marginal bone level was on average 0.09 mm lower around the implant after 6 months of loading, it was 0.15 mm higher after 1 year. CONCLUSION. Within the limits of this investigation, separate single-tooth implant restorations to replace consecutive missing teeth may clinically function well in the posterior jaw.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.2
• /
• pp.185-193
• /
• 1992

The purpose of this study was to evaluate the prevalence and distribution of tooth number anomaly by means of the analysis of panoramic radiographs in 6,531 patients visited the Dental Infirmary of Kyungpook National University Hospital from January 1983 to May 1992. The results were as follows: 1. The prevalence of congenitally missing teeth except third molar was revealed to be 10.8%, and there was a hihger prevalence in females(44.6%) than in males(55.4%). Mandibular 2nd premolars(23.2 %) were absent most frequently, followed by maxillary lateral incisors(18.4 %), mandibular lateral incisors(18.3%), and maxillary second premolars(15.4 %) in descending order of frequency. As to the number of congenitally missing teeth, the percentage of missing one tooth was 48%, missing two teeth was 35.4 %, missing three teeth was 6.6%. 2. he prevalence of congenitally missing third molars was revealed to be 39.7%. There was a higher prevalence n the maxilla(60.3%) than in the mandible(39.7%). Maxillary right 3rd molars(30.6%) were absent most frequently, followed by maxillary left 3rd molar(29.7%), mandibular right 3rd molar(202%), mandibular left 3rd molar(19.5%) in descending order of frequency. 3. The prevalence of supernumerary teeth was revealed to be 4.2%, and there was a higher prevalence in males(65.7%) than in females(34.3 ). They were ound most frequently in maxillary central incisor area(64.8%), followed by maxillary lateral incisor area(132%), posterior area of maxillary third molar(8.7%) in descending order of frequency. As to the number of supernumerary teeth; The percentage of one supernumerary tooth was 79.9%, two supernumerary teeth was 8.9%, three supernumerary teeth was 1.2 %.