• Journal of the Korean institute of surface engineering
• /
• v.56 no.5
• /
• pp.320-327
• /
• 2023

In this study, the nickel hydroxide (Ni(OH)₂) electrode for supercapacitor was prepared via hydrothermal method. Based on the nickel (Ni) foam, the electrode does not require any additional binder material or post-processing. Nickel nitrate (Ni(NO₃)₂) and hexamethylenetetramine (C₆H₁₂N₄) were used for synthesis, and the synthesis condition was 12 hours at 80 ℃. X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM) were used to analyze the structural characteristics of the electrode, and it shown that the nickel hydroxide was successfully prepared after only the one-step hydrothermal synthesis. The electrochemical properties were analyzed through the half-cell test. The prepared electrode shown a pair of oxidation/reduction peaks, indicating that the driving method included the redox reaction on the electrode surface. After the charge/discharge test, the specific capacitance was calculated as the value of 438 F/g at 3 A/g.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.254-254
• /
• 2010

We report aqueous synthesis of cadmium telluride (CdTe) quantum dots(QDs) using imidazolium-based ionic liquids with various functional groups. The functinalized ionic liquids were designed to have thiol groups, and then phase transfer with aqueous or organic solvents can be adjusted by changing side chain lengths of the cation and the choice of anion. The quantum yield was obtained IL-functionalized CdTe QDs reached up to 40% by post-treatment method.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.116-124
• /
• 1994

This paper describes the design of a high-level synthesis system. ISyn: Interface Synthesis System for ISPS-A. which generates hardware satisfying timing constraints. The original version of ISPS is extended to be used for the description/capture of interface operations and timing constraints in the ISPS-A. To generate the schedule satisfying interface constraints the scheduling process is divided into two steps:pre-scheduling and post-scheduling. ISyn allocates hardware modules with I/O ports by the clique partitioning algorithm. Experimental results show that ISyn is capable of synthesizing hardware modules effectively for internal and/or interactive operations.

• Journal of the Korean Society of Costume
• /
• v.64 no.6
• /
• pp.120-130
• /
• 2014

The present study aimed to find out the most effective instructional method for illustration to aid the $21^{st}$-century post digital generation learners in their education. Although the literature discusses government-led enactment and revision of educational policy and curriculums and research reports by the Ministry of Education and other government agencies as well as many other research articles deal with futuristic instructional methods, the instructional methods in practice have not fully changed yet. Illustration is a means of visual communication and a subject that best represent 'expressionism' and 'speed' of the post digital generation. The present study exemplifies instructional methods to establish the need for lesson plans that best suit individuality of students and for re-training instructors. Also, the feedback process with students proved that the post digital generation learned Photoshop quickly and improved creativity via image synthesis even in short-term instructions. The present findings can be possibly used as reference data for instructional methods for illustration using digital media that best suits learners of the post digital generation. This being said, further studies should delve into specific instructional methods.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.2
• /
• pp.199-214
• /
• 2020

An important technique of the present invention is primarily to parallel light detection, self-pulse therapy after diagnosis. Herpes zoster is a disease caused by varicella zoster virus, and the virus that has been latent in the dorsal root ganglion that controls the skin segment loses its immune system and physically damages it. It is an acute skin disease in which acute pain and bullous rash occur along the sensory ganglia, which are rehab by inducers such as malignant tumors. Dorsal root ganglion after complete recovery of varicella, relapsed after incubation in brain ganglion, latent virus sometimes suppressed activity by cell mediated immunity, and in cell ganglion with reduced cellular immunity. It proliferates and destroys neurons, causing pain while forming a rash and blisters. This can reduce cell necrosis and increase the phagocytosis and enzymatic activity through the movement of ions through the cell membrane, depolarization and membrane potential change, growth factor secretion, calcium ion transfer, chondrocyte synthesis, etc., And may offer treatment options for lesions of herpes zoster and post-herpetic neuralgia (PHN).Therefore, according to the present research, the diagnosis and treatment device of treating paing for herpes zoster and post-herpetic pain can be implemented in the early stage of herpes zoster, and conventional analgesic regulation, anti-inflammatory effect, post-herpetic neuralgia.

• Progress in Superconductivity
• /
• v.2 no.1
• /
• pp.6-10
• /
• 2000

New cuprates with the nominal composition $(Pb_{0.75}Sn_{0.25})Sr_2(Ca_{1-x}Lu_x)Cu_2O_z(x=0.4{\sim}1.0)$ have been synthesized. These materials exhibit superconducting properties for 0.4 $\leq$ x $\leq$ 0.7. It is also observed that the superconductivity of the as-prepared sample is enhanced by post-annealing at high temperature followed by quenching. X-ray diffraction analysis reveals that the c lattice parameter decreases as x increases whereas the a lattice parameter is nearly independent of the value of x for both the as-prepared and the post-treated samples. The thermoelectric power measurements indicate that the post-heat-treatments result in an increase in the hole carrier density which account for the observed increase of $T_c$. Bulk superconductivity with a $T_c$ value of 60 K is observed in this system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.2
• /
• pp.145-162
• /
• 1992

This paper proposes two design principles for expert systems to solve a stock market timing (SMART) problems : machine knowledge and fuzzy post-adjustment, Machine knowledge is derived from past SMART instances by using an inductive learning algorithm. A knowledge-based solution, which can be regarded as a prior SMART strategy, is then obtained on the basis of the machine knowledge. Fuzzy post-adjustment (FPA) refers to a Bayesian-like reasoning, allowing the prior SMART strategy to be revised by the fuzzy evaluation of environmental factors that might effect the SMART strategy. A prototype system, named K-SISS2 (Knowledge-based Stock Investment Support System 2), was implemented using the two design principles and tested for solving the SMART problem that is aimed at choosing the best time to buy or sell stocks. The prototype system worked very well in an actual stock investment situation, illustrating basic ideas and techniques underlying the suggested design principles.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.367-373
• /
• 2013

The ruthenium(II) ferrocenyl heterocyclic thiosemicarbazone complexes of the type $[RuCl(CO)(EPh_3)]_2L$ (where E = P/As; L = binucleating monobasic tridendate thiosemicarbazone ligand) have been investigated. Strutural features were determined by analytical and spectral techniques. Binding of these complexes with CT-DNA by absorption spectral study indicates that the ruthenium(II) complexes form adducts with DNA and has intrinsic binding constant in the range of $3.3{\times}10^4-1.2{\times}10^5M^{-1}$. The complexes exhibit a remarkable DNA cleavage activity with CT-DNA in the presence of hydrogen oxide and the cleavage activity depends on dosage.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.406-414
• /
• 2010

A novel polyacrylamide grafted hydrous ferric oxide adsorbent composite has been synthesized by using glow discharge electrolysis plasma. To optimize the synthesis conditions, the following parameters were examined in detail: applied power, discharge time, post polymerization temperature, post polymerization time, amount of crosslinking agent and hydrous ferric oxide gel added and so on. The adsorbent was characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The removal percentage of the adsorbent in Pb(II) solution was examined and the data obtained showed that the adsorbent composite has a high capacity for lead ion. For the use in wastewater treatment, the thermodynamic and kinetic of Pb(II)-capture were also studied. Results indicated that the adsorption reaction was a spontaneous and an endothermic process, and it seems to be obeyed a pseudo-secondorder rate model. Moreover, the adsorption isotherm of Pb(II)-capture is following the Langmuir and Freundlich isotherm models.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.203-203
• /
• 2015

Gallium Oxide (Ga2O3) has been widely investigated for the optoelectronic applications due to its wide bandgap and the optical transparency. Recently, with the development of fabrication techniques in nanometer scale semiconductor materials, there have been an increasing number of extensive reports on the synthesis and characterization of Ga2O3 nano-structures such as nano-wires, nano-belts, and nano-dots. In contrast to typical vapor-liquid-solid growth mode with metal catalysts to synthesis 1-dimensional nano-wires, there are several difficulties in fabricating the nano-structures by using sputtering techniques. This is attributed to the fact that relatively low growth temperatures and higher growth rate compared with chemical vapor deposition method. In this study, Ga2O3 nanowires (NWs) were synthesized by using radio-frequency magnetron sputtering method. The NWs were then coated by Au thin films and annealed under Ar or N2 gas enviroment with no supply of Gallium and Oxygen source. Several samples were prepared with varying the post annealing parameters such as gas environment annealing time, annealing temperature. Samples were characterized by using XRD, SEM, and PL measurements. In this presentation, the details of fabrication process and physical properties of branched Ga2O3 NWs will be reported.