• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.91-96
• /
• 2011

The flat slab is well-known as a structural system to reduce the story height, so it is broadly used for recent building. However, the normal RC flat slab is not appropriate for the long span, and the quantity of reinforcement bar and concrete is raised. Recently, the post-tensioning system has been introduced and used widely as an alternative method. Nevertheless, in Korea, it is not used broadly due to lack of the understanding and field experience. Especially, the post-tensioning system is hesitated to use due to uncertainty of construction ability and economics. This paper will introduce applicability to site and economics of unbonded post-tensioning system through construction examples.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1989.10a
• /
• pp.65-70
• /
• 1989

Until recently post-processing of finite element model has been Heavily relied on expensive graphic peripheral devices. For this reason many engineers and researchers can not afford to access to the graphics. with the aid of inexpensive personal computers very econmical post-processor graphics program called MICRO-POST has been developed in conjunction with low-cost printers and plotters. Model geometry or results of analysis for the unlimitted meshes either produced by mainframe or microcomputer can be easily and economi-call presented in a number of different graphic devices. The paper presents the procedure obtaining the device the independent graphics, and the structure and functions of the program. It also describes a new error-preventive dialogue type input technique to control the plot operation in an interactive manner. Through the post-processing examples for the general purpose finite element programs, it demonstrates the usefulness of the program.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.115-118
• /
• 2000

The superconducting magnet supporting post of the KSTAR system is a flexible structure that absorbs thermal shrink of the superconducting magnet and also a rigid structure that supports the weight of the magnet and dynamic loads. In this work, a structural analyses for the post under the loads were performed. As a result, it turns out that the post would be safe when it is exposed to the loads, such as magnet weight, thermal contraction, and plasma vertical disruption load. And, Buckling and modal analysis results of the post are presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.603-606
• /
• 2015

The post-production of smart farming defines the stage that the final products are delivered from producer to consumers via market on ICT network. It deals with the process of product packaging and distribution from producer to consumer with marketing strategy. This focus on reference model for post-production service including specialization, centralization of product delivery, and just-in-time delivery, and marketing system on the network. It defines a significant function component on post-production stage. The producer plays a significant role in economy being one of the main contributors to the many customers. This articles suggest the effective product distribution service which requires delivering the right product, in the right quantity, in the right condition, to the right place, at the right time, for the right cost, and encompassing global marketing based on ICT network, will be provided[1].

• Korean Journal of Child Studies
• /
• v.21 no.3
• /
• pp.41-51
• /
• 2000

This study discusses the interpretation and application of a post modern perspective to child development knowledge and early childhood teacher education. The survey of literature focused on the post modern approach to child development knowledge and early childhood teacher education, research in the reassessment of child development knowledge as it is challenged by the post modern perspective, and deconstruction of both child development knowledge and early childhood teacher education. It was concluded that child development knowledge is necessary but insufficient to early childhood teacher education. In the post modern perspective, the movement toward fostering "reflective practitioners" and basic knowledge base is more significant. Therefore, the responsibility of academics is to walk the fine line between presenting a formal knowledge base so that students gain assumption to guide their thinking and practice, critiquing both theory and derived practices.

• Structural Engineering and Mechanics
• /
• v.49 no.5
• /
• pp.569-595
• /
• 2014

In this paper, a novel semi-energy finite strip method (FSM) is developed based on the concept of first order shear deformation theory (FSDT) in order to attempt the post-buckling solution for thin and relatively thick functionally graded (FG) plates under uniform end-shortening. In order to study the effects of through-the-thickness shear stresses on the post-buckling behavior of FG plates, two previously developed finite strip methods, i.e., semi-energy FSM based on the concept of classical laminated plate theory (CLPT) and a CLPT full-energy FSM, are also implemented. Moreover, the effects of aspect ratio on initial post-buckling stiffness of FG rectangular plates are studied. It has been shown that the variation of the ratio of initial post-buckling stiffness to pre-buckling stiffness ($S^*/S$) with respect to aspects ratios is quite independent of volume fractions of constituents in thin FG plates. It has also been seen that the universal curve representing the variation of ($S^*/S$) with aspect ratio of a FG plate demonstrate a saw shape curve. Moreover, it is revealed that for the thin FG plates in contrast to relatively thick plates, the variations of non-dimensional load versus end-shortening is independent of ceramic-metal volume fraction index. This means that the post-buckling behavior of thin FG plates and the thin pure isotropic plates is similar. The results are discussed in detail and compared with those obtained from finite element method (FEM) of analysis. The study of the results may have a great influence in design of FG plates encountering post-buckling behavior.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.339-352
• /
• 1996

Many dentists have been taken an interest in restoration of severly damaged teeth after endodontic treatment and it is a true that there are lots of studies about it. In these days, although we have used Para-Post, pins, threaded steel post, cast gold post and core, and so on, as a method of restoration frequently, it has been in controversy with the effects of them on the teeth and surrounding periodontal tissue. In this study, we assume that the crown of the upper 1st premolar was severly damaged, and after the root canal therapy, two most common types of restoration were carried out ; 1) coronal-radicular amalgam restoration, 2) after setting up the Para-Post, restore with amalgam core and gold crown. After restoration, in order to present the concentration of stress at internal portion of the tooth and the surrounding periodontal tissue, we doveloped a 2-dimensional finite element model of labiopalatal section, then loaded forces from 2 long perpendicular to the lingual incline of buccal ridge an the middle point, parallel to the long direction axis of tooth at the fossa-were applied. The analyzed results were as follows : 1. Stress of the normal first premolar was concentrated on the most weakest anatomical structure, that is, cervical area, and no stress on the bifurcated area of the canal. 2. Crown restoration after root canal therapy causes large stress concentration on the bifurcated area of the canal. This stress concentration has larger value in case of lateral movement of mandible, and there are decrease in the stress concentration compared with natural tooth. 3. Coronal-radicular amalgam restoration method transports more stress to the tooth structure than restoration using Para-Post. 4. There are more stress concentration around Para-Post in the case of lateral movement, and we have more favo rable result when restored with Para-Post. 5. Generally, stress in the lateral movement is larger than stress in the perpendicular load.

• Smart Structures and Systems
• /
• v.31 no.4
• /
• pp.311-323
• /
• 2023

Ever since ancient times, earthquakes have been a major threat to the civil infrastructures and the safety of human beings. The majority of casualties in earthquake disasters are caused by the damaged civil infrastructures but not by the earthquake itself. Therefore, the efficient and accurate post-earthquake assessment of the conditions of structural damage has been an urgent need for human society. Traditional ways for post-earthquake structural assessment rely heavily on field investigation by experienced experts, yet, it is inevitably subjective and inefficient. Structural response data are also applied to assess the damage; however, it requires mounted sensor networks in advance and it is not intuitional. As many types of damaged states of structures are visible, computer vision-based post-earthquake structural assessment has attracted great attention among the engineers and scholars. With the development of image acquisition sensors, computing resources and deep learning algorithms, deep learning-based post-earthquake structural assessment has gradually shown potential in dealing with image acquisition and processing tasks. This paper comprehensively reviews the state-of-the-art studies of deep learning-based post-earthquake structural assessment in recent years. The conventional way of image processing and machine learning-based structural assessment are presented briefly. The workflow of the methodology for computer vision and deep learning-based post-earthquake structural assessment was introduced. Then, applications of assessment for multiple civil infrastructures are presented in detail. Finally, the challenges of current studies are summarized for reference in future works to improve the efficiency, robustness and accuracy in this field.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.365-368
• /
• 2005

While the goal of new IT adoption in small and medium sized firms is to choose an optimal system to fit with their own environments and conditions, that of IT post-adoption usage is to fully implement new IT and maximize their benefits from it. Therefore, the decision-making environments of new IT adoption is definitely different from those of post-adoption. Also, The direct experience of IT usage can provide some learning effect and the change of users' beliefs on new IT. From this point of view, this study attempts to figure out the differences of influencing factors on IOS usage intention between adopters and non-adopters. The results show that there are clear differences of influencing factors between two groups. Non-adopter group shows that perceived financial cost and ability of use have significant influences on IOS usage intention, while relative advantage and perceived risk in adopter group have statistically significant influences on post-adoption usage of IOS.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.99-111
• /
• 1997

We consider a production system with post-operation and early set-up. As soon as there are no more units(raw materials) to process and the machine becomes idle, it undergoes a post-operation. After the post operation, if the number of waiting units is greater than or equal to m, it begins a set-up. After the set-up, if the number of units is greater than or equal to N($\geq$m), it begins to process the units. We first analyze the system by employing the decomposition property of the vacation queue. We, then, propose an algorithm that finds the optimal threshold values ($m^*$, $N^*$). Finally we present some numerical examples and interprete the system behavior.