• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.774-781
• /
• 2014

This paper presents a fingerprint database construction method for WLAN RSSI (Received Signal Strength Indicator)-based indoor positioning. When RSSI is used for indoor positioning, the fingerprint method can achieve more accurate positioning than trilateration and centroid methods. However, a FD (Fingerprint Database) must be constructed before positioning. This step is a very laborious process. To reduce the drawbacks of the fingerprint method, a radio propagation model-based FD construction method is presented. In this method, an FD can be constructed by a simulator. Experimental results show that the constructed FD-based positioning has a 3.17m (CEP) error. In this paper, a spatial correlation method is presented to estimate the NLOS(Non-Line of Sight) error included in the FD constructed by a simulator. As a result, the NLOS error of the FD is reduced and the performance of the error compensated FD-based positioning is improved. The experimental results show that the enhanced FD-based positioning has a 2.58m (CEP) error that is a reasonable performance for indoor LBS (Location Based Service).

• 한국철도학회논문집
• /
• 제14권2호
• /
• pp.116-120
• /
• 2011

현재 초고속 자기부상열차시스템에 적용하고 있는 위치검지기술은 불연속적으로 열차위치를 파악하는 절대위치검지기술과 연속적으로 열차의 위치를 파악하는 상대위치검지기술로 구분된다. 본 논문에서는 대표적인 초고속자기부상열차인 독일 Transrapid에 적용된 절대위치검지장치의 구조와 수치모델을 분석하고, Transrapid에 적용된 절대위치검지장치와 유사한 구조를 가지는 절대위치검지장치의 인식구조별 모델을 설계하고 시뮬레이션을 통해 설계한 모델의 적합성을 검증하고 최적의 절대위치검지장치 구조를 제안한다.

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.112-119
• /
• 2023

In urban environments, signals of Global Positioning System (GPS) can be blocked and reflected by tall buildings, large vehicles, and complex components of road network. Therefore, the performance of the positioning system using the GPS module in urban areas can be degraded due to the loss of GPS signals necessary for the position estimation. To deal with this issue, various localization schemes using inertial measurement unit (IMU) sensors, such as gyroscope and accelerometer, and Bayesian filters, such as Kalman filter (KF) and particle filter (PF), have been designed to enhance the performance of the GPS-based positioning system. Among Bayesian filters, the PF has been widely used for the target tracking and vehicle navigation, since it can provide superior performance in estimating the state of a dynamic system under nonlinear/non-Gaussian circumstance. This paper presents a positioning system that uses the double-stacked particle filter (DSPF) as well as the accelerometer, gyroscope, and GPS receiver on the smartphone to provide higher pedestrian positioning accuracy in urban environments. The DSPF employs a nonparametric technique (Parzen-window) to create the multimodal target distribution that approximates the posterior distribution. Experimental results show that the DSPF-based positioning system can provide the significant improvement of the pedestrian position estimation in urban environments.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권2호
• /
• pp.79-86
• /
• 2017

Precise Point Positioning-Real Time Kinematic (PPP-RTK) refers to a technology that combines PPP with network-RTK in which a user does not directly receive observed data from a reference station but receives State-Space Representation (SSR) messages corrected for error components from a central processing station through Networked Transport of RTCM via Internet Protocol (NTRIP) or Digital Multimedia Broadcasting (DMB) for purposes of positioning. SSR messages, which refer to corrections used in PPP-RTK, are generated by a central processing station using real-time observed data collected from reference stations and account for corrections needed due to the ionosphere, troposphere, satellite orbital errors, satellite time offsets, and satellite biases. This study used a type of SSR message provided in South Korea, known as Korea-SSR (K-SSR), to implement a PPP-RTK algorithm based on code-pseudorange measurements and validated its accuracy within the reference station network. In order to validate the accuracy of the implemented algorithm outside of the network, the K-SSR was extrapolated and applied to positioning in reference stations in Changchun, China (CHAN) and Japan (AIRA). This also entailed a quantitative evaluation that measured improvements in accuracy in comparison with point positioning. The results of the study showed that positioning applied with extrapolated K-SSR correction data was more accurate in both AIRA and CHAN than point positioning with improvements of approximately 20~50%.

• 한국통신학회논문지
• /
• 제38C권1호
• /
• pp.131-140
• /
• 2013

기존의 전파에 의존한 실내 위치측위 시스템의 한계점 발생으로 실내환경에서 정확도 향상을 위한 새로운 방법의 도입이 필요한 시점이다. 최근 생태계 모방 기술이 미래의 핵심기술이 되었고, 이에 따라 귀소본능을 가진 동물들이 지구자기장을 탐색하여 생체자석으로 위치친지에 사용하는 점을 적용한 정확한 위치 측위 방법을 연구하였다. 실내 위치측위를 위한 새로운 자원인 지구자기장의 적용 가능성을 확인하기 위해 건물구조, 구성재료를 구분하고 실제 자기장센서를 탑재할 수 있는 구조물과 데이터수집 모듈을 설계한 뒤, Fingerprint 기법의 위치측위 시스템을 구성하여 위치측위 자원으로서의 지구자기장의 적용 가능성을 연구하였다. 위치측위 시스템 성능 평가에서 기존의 무선랜이 설치된 건물에서는 지구자기장 세기 기반의 위치측위 시스템이 무선랜 기반 위치측위 시스템과 유사하거나 약 20% 성능이 높이 나타났다. 이와같이 실내 위치측위를 위한 인프라 설치가 되어 있지 않는 환경에서는 지구자기장이라는 고유의 지구자원으로 실내 위치측위가 가능하다.

• 방송공학회논문지
• /
• 제26권6호
• /
• pp.790-798
• /
• 2021

본 논문에서는 기존의 도래각을 활용한 블루투스 기반의 측위방식에 각도 및 거리 유효성 검사를 추가하여 측위의 정확도를 개선하는 방식을 제안한다. 기존의 측위방식은 비 가시거리 환경에서 유발되는 다중경로 현상 등에 의하여 측위 값에 오차가 발생하는 현상이 발생한다. 제안된 방식은 피 측위 장치의 이동속도를 고려하여 측정될 수 있는 최대 도래각과 최소 도래각을 도출한 후 측정된 도래각이 최대 도래각과 최소 도래각 범위를 초과하는지를 검사하는 각도 유효성 검사와 측정된 피 측위 장치의 위치 및 측위 장치와의 거리가 유효거리를 초과하는지 검사하는 거리 유효성 검사를 시행하여 측위의 정확성을 제고한다. 제안된 방식과 기존 방식과의 측위 성능을 분석하기 위하여 모의실험을 실시하고, 모의실험 결과를 통해 측위 오차가 증대되는 상황에서는 기존의 방식에 비하여 각도 및 거리 유효성 검사를 통해 측위 성능이 개선됨을 확인한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권3호
• /
• pp.271-280
• /
• 2023

Pedestrian Dead Reckoning (PDR) methods using initial sensors are being studied to provide the location information of smart device users in indoor environments where satellite signals are not available. PDR can continuously estimate the location of a pedestrian regardless of the walking environment, but has the disadvantage of accumulating errors over time. Unlike this, WiFi signal-based wireless positioning technology does not accumulate errors over time, but can provide positioning information only where infrastructure is installed. It also shows different positioning performance depending on the environment. In this paper, an integrated positioning technology integrating two positioning techniques with different error characteristics is proposed. A technique for correcting the error of PDR was designed by using the location information obtained through WiFi Measurement-based fingerprinting as the measurement of Extended Kalman Filte (EKF). Here, a technique is used to variably calculate the error covariance of the filter measurements using the WiFi Fingerprinting DB and apply it to the filter. The performance of the proposed positioning technology is verified through an experiment. The error characteristics of the PDR and WiFi Fingerprinting techniques are analyzed through the experimental results. In addition, it is confirmed that the PDR error is effectively compensated by adaptively utilizing the WiFi signal to the environment through the EKF to which the adaptive error covariance proposed in this paper is applied.

• 대한임베디드공학회논문지
• /
• 제8권2호
• /
• pp.95-102
• /
• 2013

In this paper, we have studied the performance of the AOA (Angle of Arrival) in multi-antenna systems for LBS (Location Based Services) and we also analyzed the performance of the AOA in SISO (Single Input Single Output) in multipath environments and their differences. The adequacy of AOA positioning in new communication environments was determined. Currently used positioning methods in 3G communication environment has been developed based on SISO. However, the accuracy of SISO-based TOA (Time of Arrival), TDOA (Time Difference of Arrival), AOA positioning techniques degraded in multipath environments. The communication system will be changed and developed. According to enhanced positioning techniques are required. Using antenna characteristics and the phase difference between antennas of LTE-Advanced standard's key technique MIMO system AOA positioning, and SISO based AOA positioning performance were analyzed. We found that AOA technique potential for use based on Multiple antenna systems by computer simulations.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권1호
• /
• pp.31-36
• /
• 2014

Precise Point Positioning (PPP) is a stand-alone precise positioning approach. As the quality of satellite orbit and clock products from analysis centers has been improved, PPP can provide more precise positioning accuracy and reliability. A combined use of Global Positioning System (GPS) and Global Orbiting Navigation Satellite System (GLONASS) in PPP is now available. In this paper, we explained about an approach for combined GPS and GLONASS PPP measurement processing, and validated the performance through the comparison with GPS-only PPP results. We also used the measurement obtained from the GRAS reference station for the performance validation. As a result, we found that the combined GPS/GLONASS PPP can yield a more precise positioning than the GPS-only PPP.