• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.616-623
• /
• 1999

엘리베이터의 속도패턴은 출발시부터 목표 위치 근처에 다다를 때까지의 시간기준 속도패턴과 정밀한 정위치 정지를 위한 거리기준 속도패턴등로 이루어진다. 시간기준 속도패턴에서 거리기준 속도패턴으로 절환시 속도와 가속도의 급격한 변화가 없도록 하여야 패턴 절환시의 충격을 최소화하여 안락한 승차감을 얻을 수 있다. 본 논문에서는 속도패턴 절환 시 항상 속도와 가속도가 연속이 되도록 하고, 또한 목표 위치로의 수렴 속도를 개선한 새로운 엘리베이터 속도패턴 발생 방법을 제시한다.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.221-233
• /
• 2007

본 논문에서는 고성능 단축 선형전동기에 적용할 수 있는 최단시간 위치 패턴 알고리즘에 대하여 논한다. 근래 들어 LCD/PDP 및 반도체 산업이 발달함에 따라 대형의 고성능 위치제어 시스템에 대한 요구가 높아지고 있으며 이러한 시스템에서는 공정 주기의 단축을 위하여 시간요소를 최소화시킨 최적 위치 패턴이 반드시 필요하다. 특히 반도체 산업 분야에서는 공작기계 분야와 달리 3차원 입체 위치 패턴보다는 단축 패턴에 대한 수요가 비교적 많은 편이다. 본 연구에서는 가속도가 사다리형인 위치 패턴을 기본으로 하여 연구를 진행하였으며 위치 및 시간을 변수로 고려한 패턴 분석을 통하여 최단시간에 목적하는 위치에 도달하기 위한 패턴을 비교적 간단히 구현할 수 있음을 보이고 이를 시뮬레이션 및 간이 실험으로 구현 가능성을 입증하였다.

• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1088-1094
• /
• 2006

In this paper, an auto path generation and an active compliance grinding control using 3-axis farce sensor are presented. These control algorithms enable the grinding robot to follow unknown path of various workpiece shape pattern. The robot is able to go grinding along unknown paths by position controller managing tangential direction angle and cutting speed, with only information about the start position and the end position. Magnitude and direction of normal force are calculated using force data that go through low pass filter. Moreover, normal and tangential directions are separated for force control and velocity control, respectively.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.683-689
• /
• 2014

The paper introduces dynamic generation technique of foot trajectories for humanoid robots using CPG(Central Pattern Generator) and proposes adaptive walking method for slope terrains combining a feedback network. The proposed CPG based technique generates the trajectory of foot in the Cartesian coordinates system and it can change the step length adaptively according to the feedback information. To cope with variable slope terrains, the sensory feedback network in the CPG are designed using the geometry relationship between foot position and body center position such that humanoid robot can maintain its stability. To demonstrate the effectiveness of the proposed approach, the experiments on humanoid robot Nao are executed in the Webot simulation. The performance and motion features of the CPG based approach are compared and analyzed focusing on the adaptability in slope terrains.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.11-21
• /
• 1999

In this paper, an algorithm to generate the mounting position and orientation of SMD is proposed. For the proposed algorithm, we used the image captured from PCB and utilized image processing technique. Pre-processing technique, threshold level determination method, divided recognition of the SMD pattern on a PCB, calculating mounting position and orientation are related topics of this research. All of the related topics were reviewed and the results of this research were obtained from applying the algorithm to the real Surface Mounting Machine(model:MCUl/CPM) made by Samsung Electronics Co.

• 복식문화연구
• /
• 제14권3호
• /
• pp.387-403
• /
• 2006

The purpose of this study was to develop a new torso pattern for the schoolgirl of a tween generation who had different somatotype from children and teenagers. The subjects in this study were female elementary school students of fifth or sixth grade. Through a sensory evaluation of four existing torso patterns, the first research torso pattern was developed. Drafting methods of each item, which closed to the optimum value three, were selected. The differences between the values of the selected drafting methods and the optimum three were verified through a Wilcoxon's ranked sum test. The final research torso pattern was developed through adjusting the drafting methods according to the deviation from the optimum value three. The schoolgirl of a tween generation is at the time to show the remarkable breast development compared with a waist circumference, so the bust drafting was defined as B/4+ 1.25cm separately front and back. The drafting of a waist circumference was defined as W/4+1cm separately front and back which taken the ease amounts of the somatotype into consideration of the schoolgirl of a tween generation. A princess line was used instead of a waist dart because their hip circumference was more developed than a waist circumference. The crossed amount of a front hemline was 0.3cm and that of a back hemline was 0.7cm. and the princess line of the position was drawn with a straight line at a right angle of the back waistline. The armhole depth was determined B/4-1cm in consideration of the aesthetic and the trend, although the effective movement of upper arm was required.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.20-25
• /
• 2007

This paper describes a second-generation dual sine-grid surface encoder for 2-D position measurements. The surface encoder consisted of a 2-D grid with a 2-D sinusoidal pattern on its surface, and a 2-D angle sensor that detected the 2-D profile of the surface grid The 2-D angle sensor design of previously developed first-generation surface encoders was based on geometric optics. To improve the resolution of the surface encoder, we fabricated a 2-D sine-grid with a pitch of $10{\mu}m$. We also established a new optical model for the second-generation surface encoder that utilizes diffraction and interference to generate its measured values. The 2-D sine-grid was fabricated on a workpiece by an ultra precision lathe with the assistance of a fast tool servo. We then performed a UV-casting process to imprint the sine-grid on a transparent plastic film and constructed an experimental setup to realize the second-generation surface encoder. We conducted tests that demonstrated the feasibility of the proposed surface encoder model.

• Mass Spectrometry Letters
• /
• 제10권2호
• /
• pp.50-55
• /
• 2019

The fragmentation statistics of ion trap CID (Collision-Induced Dissociation) spectra using 87,661 tandem mass spectra of doubly charged tryptic peptides are analyzed here. In contrast to the usual method of using intensity information, the frequency of occurrence of fragment ions, with respect to the position of the cleavage site and the residues at these sites is studied in this paper. The analysis shows that the frequency of occurrence of fragment ion peaks is more towards the middle of the peptide than its ends. It was noted that amino acid with an aromatic and basic side chain at N- & C- terminal end of the peptide stimulates more peaks at the lower end of the spectrum. The residue pair effect was shown when the amide bond occurs between acidic and basic residues. The fragmentation at these sites (D/E-H/R/K) stimulates the generation of the y-ion peak. Also, the cleavage site H-H/R/K stimulates the generation of b-ions. K-P environment in the peptide sequence has more tendency to generate y-ions than b-ions. Statistical analysis helps in the visualization of the CID fragmentation pattern. Cleavage pattern along the length of the peptide and the residue pair effects, enhance the knowledge of fragmentation behavior, which is useful for the better interpretation of tandem mass spectra.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.113-116
• /
• 1996

In this paper, an algorithm to generate the mounting position and orientation of SMD is proposed. For the proposed algorithm, we used the image captured from PCB and utilized image processing technique. Pre-processing technique, threshold level determination method, divided recognition of the SMD pattern on a PCB, calculating mounting position and orientation are related topics of this research. All of the related topics were reviewed and the results of this research were obtained from applying the algorithm to the real Surface Mounting Machine(model: MCU1 /CPM) made by Samsung Electronics Co.(Ltd.)

• 제어로봇시스템학회논문지
• /
• 제15권5호
• /
• pp.548-554
• /
• 2009

We propose an automatic inspection system for hologram with multiple patterns. The system hardware consists of illuminations, camera, and vision processor. Multiple illuminations using LEDs are arranged in different directions to acquire each image of patterns. The system software consists of pre-processing, pattern generation, and pattern matching. The acquired images of input hologram are compared with their reference patterns by developed matching algorithm. To compensate for the positioning error of input hologram, reference patterns of hologram for different position should be generated in on-line. We apply a frequency transformation based CGH(computer-generated hologram) method to generate reference images. For the fast pattern matching, we also apply the matching method in the frequency domain. Experimental results for hologram of Korean currency are then presented to verify the usefulness of proposed system.