• 인터넷정보학회논문지
• /
• 제9권5호
• /
• pp.1-7
• /
• 2008

본 논문에서는 시각 장애인을 위한 효율적인 휴대용 점자 시스템을 제안하였으며, 그 설계 및 구현을 설명한다. 시각 장애인이 정보화 기기를 효과적으로 사용하기 위해서는 전용 정보화 기기의 구축, 장애를 고려한 접근성 보장, 교육 지원 등 세 가지 조건이 만족되어야 한다. 본 논문에서는 위의 세 가지 조건을 요구사항으로 정의하고, 이 조건들을 만족하도록 시각장애인을 위한 점자 시스템을 설계하였다. 제안된 시스템에서는 PC에 저장되어 있는 문서나 웹 페이지를 점자와 한글간의 변환 규칙에 따라서 구현한 알고리즘을 통해 데이터를 변환하고, 변환된 데이터를 휴대용 점자 디바이스에게 전송한다. 그리고 휴대용 점자 디바이스는 전자석의 원리를 이용하여 점자를 표현한다.

• 한국안전학회지
• /
• 제38권3호
• /
• pp.110-120
• /
• 2023

Following the Fukushima accident, portable equipment employed as accident mitigating systems have been installed and operated to reduce core damage and large early release frequencies. In addition, the establishment of an accident management strategy has gained importance. This study investigated the current status of portable equipment including the international portable equipment FLEX (diverse and flexible coping strategies), and domestic portable equipment multi-barrier accident coping strategy (MACST). Research on optimal utilization of MACST remains insufficient. As a preliminary study for establishing an optimal strategy, sensitivity studies were conducted to facilitate the priority of use on portable equipment, number of portable equipment, and dependency of operator actions based on a multi-unit probabilistic safety assessment model. The results revealed the conditions that reduced the multi-unit and site conditional core damage probabilities, indicating the optimal strategy of MACST. The results of this study can be used as a reference for establishing an optimal strategy that utilizes domestic safety equipment in the future.

• Journal of Biosystems Engineering
• /
• 제14권2호
• /
• pp.115-122
• /
• 1989

The objective of this study was to develop a portable auger for handling rough rice in bulk. For this purpose, a system analysis was taken for the systems of harvesting, drying, storage and transportation of rough rice and an optimal handling capacity of portable auger was determined. Then a portable auger of which capacity is 9.2 $m^3/h$ (Indica type rough rice, 19.5%, w.b.) was designed and manufactured by design requirements and tested. Test results showed that the performance of portable auger developed satisfied most design requirements.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2299-2311
• /
• 2013

As portable multimedia devices become more popular and smaller, the use of portable projectors is also rapidly increasing. However, when portable projectors are used in mobile environments in which a dedicated planar screen is not available, the problem of geometric distortion of the projected image often arises. In this paper, we present a geometric image compensation method for portable projectors to compensate for geometric distortions of images projected on various types of planar or nonplanar projection surfaces. The proposed method is based on extraction of the two-dimensional (2D) geometric information of a projection area, setting of the compensation area, and prewarping using 2D homography. The experimental results show that the proposed method allows effective compensation for waved and arbitrarily shaped projection areas, as well as tilted and bent surfaces that are often found in the mobile environment. Furthermore, the proposed method is more computationally efficient than conventional image compensation methods that use 3D geometric information.

• 한국농공학회논문집
• /
• 제65권5호
• /
• pp.1-11
• /
• 2023

Due to climate change and aging of reservoirs, damage to embankment slopes is increasing. However, the safety diagnosis of the reservoir slope is mainly conducted by visual observation, and the time and economic cost are formidable to apply soil mechanical tests and slope stability analysis. Accordingly, this study presented a predicting method for the compaction and strength characteristics of the reservoir embankment soil using a portable static cone penetration test. The predicted items consisted of dry density, cohesion, and internal friction angle, which are the main factors of slope stability analysis. Portable static cone penetration tests were performed at 19 reservoir sites, and prediction equations were constructed from the correlation between penetration resistance data and test results of soil samples. The predicted dry density and strength parameters showed a correlation with test results between R² 0.40 and 0.93, and it was found to replace the test results well when used as input data for slope stability analysis (R² 0.8134 or more, RMSE 0.0320 or less). In addition, the prediction equations for the minimum safety factor of the slope were presented using the penetration resistance and gradient. As a result of comparing the predicted safety factor with the analysis results, R² 0.5125, RMSE 0.0382 in coarse-grained soil, R² 0.4182 and RMSE 0.0628 in fine-grained soil. The results of this study can be used as a way to improve the existing slope safety diagnosis method, and are expected to be used to predict the characteristics of various soils and inspect slopes.

• 농업과학연구
• /
• 제38권4호
• /
• pp.761-767
• /
• 2011

The objective of this study was to predict total bacteria count of pork meats by using the portable electronic nose systems developed throughout two stages of the prototypes. Total bacteria counts were measured for pork meats stored at $4^{\circ}C$ for 21days and compared with the signals of the electronic nose systems. PLS(Partial least square), PCR (Principal component regression), MLR (Multiple linear regression) models were developed for the prediction of total bacteria count of pork meats. The coefficient of determination ($R_p{^2}$) and root mean square error of prediction (RMSEP) for the models were 0.789 and 0.784 log CFU/g with the 1st system for the pork loin, 0.796 and 0.597 log CFU/g with the 2nd system for the pork belly, and 0.661 and 0.576 log CFU/g with the 2nd system for the pork loin respectively. The results show that the developed electronic system has potential to predict total bacteria count of pork meats.

• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.194-198
• /
• 2015

In this paper, a remote emergency stop system to improve the safety of an automated driving vehicle is proposed. One of the most serious problems of the previous wireless remote emergency system is that it does not work when the wireless channel is damaged in case of an emergency because it is composed of a single communication channel. Therefore, the proposed remote emergency stop system composed of a portable wireless remote system and a stationary wireless remote system is designed and the remote emergency stop system for automated driving vehicles is developed. By applying it to an automated driving vehicle to check it's performance, the wireless remote system is tested. Emergency stops using the portable wireless remote system is tested when the stationary wireless remote system is disconnected. Also, emergency stops using the stationary wireless remote system are tested when the portable wireless remote system is disconnected. The results of the emergency stop test show a satisfactory performance.

• 산업경영시스템학회지
• /
• 제30권1호
• /
• pp.59-65
• /
• 2007

HPI (High-speed Portable Internet) system which provides high speed internet services is going to be commercialized soon. Since HPI provides simultaneously four different service types such as UGS (Unsolicited Grant Service), rtPS (real time Polling Service), nrtPS(non-real time Polling Service), and BE (Best Effort) under different QoS (Quality of Service) requirements and limited wireless channel resources, efficient packet scheduling mechanisms are necessary to increase the utilization of channels as well as to satisfy the various QoS requirements. This study regards the traffic data to be served as time series and proposes a new packet scheduling algorithm based on the nonparametric statistical test. The performance of the newly proposed algorithm is evaluated through the simulation analysis using a simulator that can evaluate the performance of packet scheduling mechanisms under various values of system parameters and measures such as packet delay time, data transmission rate, number of loss packets, and channel utilization.

• 한국산업정보학회논문지
• /
• 제22권2호
• /
• pp.71-78
• /
• 2017

본 논문에서는 휴대기기용 DC-DC 부스트 컨버터를 설계하였다. 제안하는 DC-DC 부스트 컨버터는 1MHz의 스위칭 주파수로 구동되며, 인덕터, 출력 커패시터, MOS 트랜지스터 등으로 이루어지는 파워단 부분과 보호회로단, 컨트롤블럭단으로 구성하였다. CMOS magnachip $0.18{\mu}m$ 공정을 이용하여 SPICE 모의실험을 통하여 동작을 확인하였고, 칩을 제작하여 모의실험결과와 비교 분석하였다. 설계된 컨버터는 3.3 V 입력 전압 조건에서 출력전압 4.8 V 가 나타났고, 출력전류 95 mA 로 기존의 25~50 mA보다 큰 출력을 얻었다.

• 한국산업정보학회논문지
• /
• 제12권3호
• /
• pp.95-103
• /
• 2007

데이터, 비디오, 오디오 등에 대한 디지털 컨버전스 추세와 함께, 최근 휴대용 멀티미디어 재생기(PMP)가 점차 대중화되고 있다. PMP는 DSP, 보다 큰 LCD 스크린, 하드디스크 등이 장착되는 이유로 다른 휴대형 장치들에 비해서 효과적인 전력관리에 대한 필요성이 강조되고 있다. 본 논문에서는 데이터수집 장치를 기반으로 한 하드웨어/소프트웨어기반 전력 측정 시스템 구축에 대해서 설명하고, PMP에서 발생하는 부팅, 동영상 재생, 다양한 비디오 코딩 방식 적용과 같은 다양한 사건 실행시의 전력소모 패턴을 측정하고 분석한다. 분석 결과는 저전력 PMP 장치를 설계하기 위한 유용한 정보를 제공한다.