• Journal of Korean Port Research
• /
• v.14 no.4
• /
• pp.429-439
• /
• 2000

The primary purpose of dredging work is to maintain navigational readiness and to increase environmental amenity. Therefore the dredging project, which is composed of excavating, removing, transporting and storing or dumping dredged material, must be carefully managed to insure that dredging works are completed in a cost-effective and environmentally safe method. The most important point in dumping operations is evaluating and decreasing the impacts of dumping works at the dumping area. One of the most effective method for this purpose is using the schematic process composed of the sophisticate plan, precise work and predicting/reducing the impacts based on an numerical model being closely linked with field observation. In this study, a numerical model is used to predict the spatial transport and fate of the effluent discharged from the confined dumping facility(CDF) located at a coastal area. To achive this purpose, numerical models were used for reappearing the tidal current of concerned area. These models were then applied to Mokpo harbpr where capital dredging and maintenance dredging are being conducted simultaneously and the CDF is under construction. In series of model case study, we found that the effluent discharged from CDF was governed by the receiving water condition and outfall geometry, so that limit of near-field was 14∼500 meter down stream and 4∼150 meter in transverse direction. dilution ranged from 1.1 to 8.2 on the cases. Long-term diffusion characteristics was governed by the dilution rate during near-field behavior, ambient conditions and CDF operation modes.

• Journal of Navigation and Port Research
• /
• v.36 no.7
• /
• pp.545-552
• /
• 2012

Domestic marina facilities today consist mostly of composite-type marinas with particular spatial composition characteristics, due to the regulatory restrictions that keep their development in the public sector and the tepid growth of marine leisure-sports. To develop a marina club design appropriate for domestic conditions, this study establishes space program standards for designing Korean marinas based on a case analysis of existing marina clubs and a survey of floating marina clubs. It is possible for a current composite-type Korean marina club to have a spatial composition of 16~18% for marina-exclusive facility (mFA), 47~49% for commercial facility (cFA), 27~30% for public space (pFA) and 5~8% for management space (emFA). With this composition as a basis, space program estimation of a Korean marina club can be done through the process of estimating in order the marina-exclusive facility area, the floor area by each space and the total floor area, the first floor area, the deck area and the pontoon area. Since the space program established in this study can be utilized as a tool for designing a Korean marina club, it is expected to be helpful in designing marina clubs in the future.

• Journal of architectural history
• /
• v.28 no.2
• /
• pp.7-18
• /
• 2019

The Chosun Dynasty established and implemented measures to prevent Japanese invasion into the southern coast. To this end, the number of naval vessels and the number of ships were increased, and a shipyard(船所) was constructed to protect the safety of the vessels. The shipyard is a port facility where military vessels are anchored and repaired, as well as public facilities that are needed for military training on public and land, as well as facilities for storing supplies and equipment needed for ships on land and defense at the port entrance. Despite being such an important facility for national defense, Shipyard has not been noticed. Studies have shown that the position of shipyard is divided into the riverside type and the riverbank type, which is due to the topographical features of Korea. The repair cycle of naval vessels, the carrying out of Yeonhun(prevent the water from decaying the part of the ship, a raw tree was burned to smoke) and the place of sea training also affected the construction of the Gul River(掘江). The space structure of shipyard is divided into port entry facilities for monitoring and controlling at the entrance to the harbor, border facilities for folding and repairing military vessels, and land facilities for holding land exercises and administrative work of military vessels and military equipment.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.231-245
• /
• 2011

Pyeongtaek Port is becoming a specialized for importing or exporting cars. In 2010, Pyeongtaek Port became the major port, out of the 31 ports in Korea, for import and export of cars. Usage of this port was especially high for imported cars. In 2011, more than 1 million cars are expected to be imported or exported via Pyeongtaek Port. This research analyses the factors for selecting Pyeongtaek Port for imported cars and recommendations required to improve Pyeongtaek Port. To do this, questionnaires were given to 14 imported car companies that currently, July 2011, use Pyeongtaek Port and used AHP criteria to asses the importances of each factors. According to this research, the most important determinant for the use of Pyeongtaek Port is 'Port Location' followed by 'Port Cost', 'Port Facility', 'Port Service', 'Port Marketing' and 'Port Cargo Volume', in the order of importance. Also, imported car companies say that the factor in need for the most urgent improvement is 'Port Facilities' in Pyeongtaek Port.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.75-87
• /
• 2001

Inter-port competition is fiercer than in the past because of technological evolution in transport systems : the increasing side of containerships implies only a few calls in three or four ports at each end of the trade and the rest of the traffic being served by smaller feederships. It is therefore essential for big ports to be selected as one of these calls by the main shipowners, consortia and alliances to avoid rmarginalisation. In order to compete effectively, many ports have been obliged to modernise and extend considerably its existing ports or to build new port facilities. With the advent of major environmental legislation around the world, however, amenities such as fish and wildlife, clean air and water, access to the waterfront, and view protection took on greater importance. Ports are now being forced to incorporate environmental considerations into their planning and management functions in order to avoid additional costs or timing delays. The aim of this paper is to analyse the port value by which port comparison(or selection) will be made with HFP(Hierarchical Fuzzy Process) method. This was done by extracting and grouping the evaluation factors of port value by port experts : facility and location factor, logistics service factor environment and amenity factor, city and economic factor, and human and system factor. For empirical test of this method, 6 major ports in Northeast Asia were chosen and analysed. The order of importance for five evaluation factors were 1) facility and location factor 2) logistics service factor 3) human and system factor, 4) city and economic factor, and 5) environment and amenity factor. This means that geographical location and logistics services are still being considered as the most important factor to call the port by port users. even though environment and amenity factor shows relatively low figure. Among 6 major ports, Port of Kobe was ranked the first position in a comprehensive evaluation, while Ports of Busan and Kwangyang were 4th and 5th respectively. This implies that Port of Busan should make much efforts to enhance the existing facilities as well as management system.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.488-493
• /
• 2020

In this study, we sought to establish a vessel-discharge pollutant-treatment system recommended by IMO by first investigating advanced facilities overseas to help us understand and evaluate our domestic facility and needs. IMO recommends the installation and operation of port pollutant-storage facilities to adequately treat pollutants emitted by ships entering the port, and we reviewed the registration and operation of these facilities in IMO member countries, focusing on the IIII Code. Due to recent environmental regulations, additional facilities are required to treat the washing water discharged from equipment such as scrubbers mounted on the ship so pollutant-storage facilities must be established. Currently, Korea's ship-discharged wastes are being moved from ports to land waste-treatment plants, and their quantity and properties are not being monitored. Therefore, in this study, we improved monitoring of the discharged pollutants and investigated the proper arrangement of pollutant storage facilities as recommended by IMO. The system we established can help provide smooth service to incoming ships - and appropriate treatment of pollutants and will greatly benefit international maritime operations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.153-162
• /
• 2006

The objective of this paper is to quickly examine the prosperity of a marine transportation system ana port development in the Han river Estuary and Yellow Sea border areas and to establish a cooperative management plan for the development of marine transportation and port service for cargo transportation in Seoul. as well as between South Korea and North Korea. Specifically. a development plan with a sincere effort to preserve the environment surrounding Marine Peace Park. The intent is to prove that prosperity is possible through the development of marine transportation and port service.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.501-510
• /
• 2023

The importance of using construction data is increasing in accordance with the recent trend in the smart construction. However, construction project and maintenance information is distributed on the web, and the existing BIM(Building Information Modeling) information exchange and linking method using IFC(Industry Foundation Classes) cannot support connection with BIM data and web resources. This study aims to establish the BIM-based port facility data integration system using linked data(LD) technology in order to integrate BIM and heterogeneous data in the port maintenance domain. To this end, the port BIM-based ifcOWL and port facility maintenance ontology were designed, and LD was built for the BIM and maintenance information of Busan New Port 2-1 Pier3, a BIM pilot project. In addition, service prototypes such as search, statistics and SPARQL(SPARQL Protocol and RDF Query Language) endpoint functions were implemented using the issued LD. The LD-based information utilization system is expected to improve the reusability of information by converting the existing closed information system into an open system and BIM and maintenance data as a web resource in a standard format.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.55-61
• /
• 2023

In this study, a basic research was conducted to establish a maintenance plan considering the environmental factors and deterioration characteristics of port facilities. The precise safety diagnosis reports for Incheon and Busan port facilities were referenced to examine the extent of deterioration and damage. The relationship with the degradation environmental assessment presented in the current guidelines was also analyzed. The analysis of the damage level of Incheon and Busan port facilities revealed that Incheon Port exhibited approximately three times higher damage rate compared to Busan Port. In the case of Incheon Port, reinforcement corrosion and external damage showed similar proportions, while in Busan Port, reinforcement corrosion had a higher proportion compared to external damage. On the other hand, when comparing with the degradation environmental assessment presented in the guidelines, it was found that there were some limitations in performing quantitative evaluation based on the guidelines for assessing port facilities. Therefore, an analysis based on tidal range was conducted by referring to existing literature. The analysis of tidal range in Incheon and Busan regions showed that Incheon had approximately five times higher difference compared to Busan. It is considered that this can be utilized as a differentiated item from existing degradation environmental assessment criteria.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.155-164
• /
• 2021

The major factors that threaten port operation are diversie. Coronavirus disease-19, (COVID-19), which has recently disrupted operations worldwide, is one of them. Port operation was completely stopped due to a confirmed coronavirus involving a Russian sailor in Gamcheon Port, Busan, Korea in 2020, resulting port closure due to the infectious disease outbreak. The port is a national infrastructure facility that controls most of Korea's import and export logistics, and it is absolutely necessary to secure resilience against threats such as infectious diseases. However, due to insufficient data, this study was undertaken to determine a cause-effect relationship of infectious diseases during the container port operation using system dynamics. In addition, the port's resilience against infectious diseases was measured in terms of productivity and cargo volume through simulation. The model built via simulation analysis can actually be used to measure the resilience of a port. In the event of an infectious disease outbreak at a port, a quarantine policy scenario can be implemented and the effect compared, thereby improving the resilience.