• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권1호
• /
• pp.83-102
• /
• 2015

The present paper analyses the radiation effects of mass transfer on steady nonlinear MHD boundary layer flow of a viscous incompressible fluid over a nonlinear porous stretching surface in a porous medium in presence of heat generation. The liquid metal is assumed to be gray, emitting, and absorbing but non-scattering medium. Governing nonlinear partial differential equations are transformed to nonlinear ordinary differential equations by utilizing suitable similarity transformation. The resulting nonlinear ordinary differential equations are solved numerically using Runge-Kutta fourth order method along with shooting technique. Comparison with previously published work is obtained and good agreement is found. The effects of various governing parameters on the liquid metal fluid dimensionless velocity, dimensionless temperature, dimensionless concentration, skin-friction coefficient, Nusselt number and Sherwood number are discussed with the aid of graphs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.691-694
• /
• 2005

The present study was to examine the influence of porosity and moisture content on the water permeability, strength and plant-growth characteristics of porous concrete. The result of the experiment verified that the coefficient of permeability of porous concrete with porosity between $30\%\;and\;36\%$ increased by 2cm/sec and the compressive strength decreased 1MPa at every $3\%$ increase of porosity. In addition, the plant growth of porous concrete showed 5cm at $36\%$ porosity and 2.5cm at $30\%$ porosity respectively. Thus, the higher the porosity, the more the plant grew. When $2\%$ moisture content was used in porous concrete with the same porosity, the plant growth was accelerated two times faster than the case without it.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.183-186
• /
• 1994

Porous piezoelectric ceramics of P7T have been newly developed to apply for transducers in an echo sounder PZT powders were prepared by the molten salt synthesis method. The porous PZT was prepared from a mixture of PZT and polyvinylalcohol(PVA) powders by BURPS(Burnout Plastic Sphere) technique. The piezoelectric and acoustic properties with various PVA wt.% have studied. The density of porous PZT ceramics was decreased linearly with increasing the PVA sphere wt.%. Piezoelectric coefficient d$\_$33/ of porous PZT ceramics was almost same to that of single phase PZT ceramics. The thickness mode coupling factor k$\_$t/ was ranged over 0.53∼0.59 comparable with the single phase PZT ceramics(k$\_$t/=0.7).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.69-72
• /
• 2011

The purpose of this study is to identify basic property of porous concrete using cooper slag as fine aggregate. The specimens were made with cooper slag with various mixing ratio(10, 20, 30, 50%), porous concrete and porous concrete containing river fine aggregate and crushed fine aggregate, which W/B ratio fixed 0.25. Compressive strength, Flexural strength, coefficient of permeability. From the test results, various fine aggregate mixing ratio improves compressive strength and flexural strength, but cooper slag fine aggregate mixing ratio over 20%, concrete indicates trend to decrease performance of permeability. Concrete containing fine aggregate is improved the performance of permeability and strength compared to other specimen, when age 28days, and cooper slag mixing ratio less than 20% concrete indicates better performance than cooper slag mixing ratio 20% over.

• Advances in materials Research
• /
• 제12권2호
• /
• pp.133-159
• /
• 2023

In this paper, a size-dependent dynamic investigation of a porous metal foams microbeamsis presented. The novelty of this study is to use a metal foam microbeam that contain porosities based on the refined high order shear deformation beam model, with sinusoidal shear strain function, and the modified strain gradient theory (MSGT) for the first time. The Lagrange's principle combined with differential quadrature hierarchicalfinite element method (DQHFEM) are used to obtain the porous microbeam governing equations. The solutions are presented for the natural frequencies of the porous and homogeneoustype microbeam. The obtained results are validated with the analytical methods found in the literature, in order to confirm the accuracy of the presented resolution method. The influences of the shape of porosity distribution, slenderness ratio, microbeam thickness, and porosity coefficient on the free vibration of the porous microbeams are explored in detail. The results of this paper can be used in various design formetallic foammicro-structuresin engineering.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권2호
• /
• pp.97-104
• /
• 2017

본 논문에서는 휠로더 냉각성능 평가를 위한 열유동해석의 효율성 향상과 비용 저감을 위해서 흡배기구 다공판형상을 Porous media 기법을 이용하여 단순화하고 해석 정도를 확인하였다. 여기서 Porous media에 적용된 다공판형상의 유동손실계수는 시험데이터를 바탕으로 정의하였다. 또한 다공판형상의 유동손실계수를 해석적으로 정의하기 위해 단위형상에 대한 압력손실을 계산하고 시험결과와 비교하였다. 마지막으로 휠로더 흡배기구를 단순화한 해석모델의 냉각해석 결과와 실차 방열시험 결과를 비교하였다. 이 연구를 통해 휠로더 흡배기구 단순화 해석기법의 적용 가능성을 확인하였으며 냉각성능 평가 및 개선 연구를 효과적으로 수행할 수 있는 기반을 마련하였다.

• Steel and Composite Structures
• /
• 제48권2호
• /
• pp.113-130
• /
• 2023

The present manuscript aims to investigate the deviation between the middle surface (MS) and neutral surface (NS) formulations on the static response of bi-directionally functionally graded (BDFG) porous plate. The higher order shear deformation plate theory with a four variable is exploited to define the displacement field of BDFG plate. The displacement field variables based on both NS and on MS are presented in detail. These relations tend to get and derive a new set of boundary conditions (BCs). The porosity distribution is portrayed by cosine function including three different configurations, center, bottom, and top distributions. The elastic foundation including shear and normal stiffnesses by Winkler-Pasternak model is included. The equilibrium equations based on MS and NS are derived by using Hamilton's principles and expressed by variable coefficient partial differential equations. The numerical differential quadrature method (DQM) is adopted to solve the derived partial differential equations with variable coefficient. Rigidities coefficients and stress resultants for both MS and NS formulations are derived. The mathematical formulation is proved with previous published work. Additional numerical and parametric results are developed to present the influences of modified boundary conditions, NS and MS formulations, gradation parameters, elastic foundations coefficients, porosity type and porosity coefficient on the static response of BDFG porous plate. The following model can be used in design and analysis of BDFG structure used in aerospace, vehicle, dental, bio-structure, civil and nuclear structures.

• 신재생에너지
• /
• 제2권2호
• /
• pp.4-8
• /
• 2006

Reduction of optical losses in crystalline silicon solar cells by surface modification is one of the most important issues of silicon photovoltaics. Porous Si layers on the front surface of textured Si substrates have been investigated with the aim of improving the optical losses of the solar cells, because an anti-reflection coating and a surface passivation can be obtained simultaneously in one process. We have demonstrated the feasibility of a very efficient porous Si AR layer, prepared by a simple, cost effective, electrochemical etching method. Silicon p-type CZ (100) oriented wafers were textured by anisotropic etching in sodium carbonate solution. Then, the porous Si layer were formed by electrochemical etching in HF solutions. After that, the properties of porous Si in terms of morphology, structure and reflectance are summarized. The surface morphology of porous Si layers were investigated using SEM. The formation of a porous Si layer about $0.1{\mu}m$ thick on the textured silicon wafer result in an effective reflectance coefficient Reff lower than 5% in the wavelength region from 400 to 1000nm. Such a surface modification allows improving the Si solar cell characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1539_1540
• /
• 2009

본 논문에서는 Porous Au-Pt 전극을 기반으로 연료전극과 공기전극으로 구성된 초소형 메탄올 센서를 설계 및 제작하고 그 특성을 분석해 보았다. 제안된 Porous Au-Pt 전극은 Porous 구조의 금속을 만드는 방법 중 하나인 Templating기법을 적용하여 수백나노 크기의 Pore들을 가진 Porous Au 전극을 제작하였고 그 위에 수 나노 크기의 Pt particles을 전해 도금하여 제작되었다. 고분자 전해질막 층으로서 Nafion film은 전해 도금한 Porous Au-Pt 전극 사이에 삽입하고 hot Pressing 통하여 센서를 구성하였다. Porous Au-Pt 전극을 기반으로한 전기화학 메탄올 센서는 $0.25\;cm^2$ 의 작은 전극 면적에도 불구하고 넓은 온도 범위 ($20^{\circ}C-100^{\circ}C$) 에서 온도에 따른 뛰어난 선형성(Correlation coefficient = 0.986)을 보였으며, 특히, 일정온도 ($60^{\circ}C$)에서 메탄올 농도 0 M에서 2 M 까지의 전류응답 특성을 측정, 분석 결과 메탄올 농도에 따른 9.6 mA/$mM{\cdot}cm^2$ 의 민감도 및 10 초 이내의 응답시간 특성을 보였다.

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.162-172
• /
• 1998

A numerical study of premixed combustion within a porous ceramic burner (PCB) is performed to understand flame behavior with respect to various model parameters. Basic flame structure within the porous ceramic burner and species profiles such as NO and CO are examined. Sensitivity analysis of flame speed, gas and solid temperature, NO and CO emission from the burner with respect to reaction steps and various physical properties of the ceramic material is applied to find the most significant parameters in selection of porous materials for the porous ceramic burner. Effects of thermal conductivity, extinction coefficient and scattering albedo on the burner characteristics are studied through the sensitivity analysis. The results of sensitivity study reveal the order of importance in ceramic material properties to get suitable burner performance. Scattering albedo, which governs the ratio of absorbed energy by the ceramic material to total radiative energy transferred, is one of the most important parameters in the material properties since it affects the actual absorbed radiation rate and thus it largely affects the flame structure. Through the study, it is found that the sensitivity study can be used to estimate the flame behavior within the porous ceramic burner more effectively.