• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.553-567
• /
• 2014

Borehole instability during drilling process occurs frequently when drilling through shale formation. When a borehole is drilled in shale formation, the low permeability leads to an undrained loading condition. The pore pressure in the compressed area near the borehole may be higher than the initial pore pressure. However, the excess pore pressure caused by stress concentration was not considered in traditional borehole stability models. In this study, the calculation model of excess pore pressure induced by drilling was obtained with the introduction of Henkel's excess pore pressure theory. Combined with Mohr-Coulumb strength criterion, the calculation model of collapse pressure of shale in undrained condition is obtained. Furthermore, the variation of excess pore pressure and effective stress on the borehole wall is analyzed, and the influence of Skempton's pore pressure parameter on collapse pressure is also analyzed. The excess pore pressure decreases with the increasing of drilling fluid density; the excess pore pressure and collapse pressure both increase with the increasing of Skempton's pore pressure parameter. The study results provide a reference for determining drilling fluid density when drilling in shale formation.

• Journal of Periodontal and Implant Science
• /
• 제34권2호
• /
• pp.411-424
• /
• 2004

This study was performed to evaluate bone formation in the calvaria of rabbit by the concept of guided bone regeneration with titanium mesh membrane. Two different titanium meshes with varying number (353, 565) of pore were utilized in the study. Two surgical sites(T353, T565) were evaluated about whether or not the number of pore may have effect on the bone formation. The animal was sacrificed at 10days, 3 weeks, 6weeks, and 8 weeks after the surgery. Non-decalcified specimens were processed for histologic analysis. 1. Titanium mesh was biocompatible and capable of maintaining the spacemaking. 2. At 3 weeks, 6 weeks, and 8 weeks after GBR procedure, bone formation was more in the T353 site than in the T565 site. 3. Soft tissue layer above the regenerated bone was better developed in the T565 site. 4. There was no difference between two membranes in bone maturity with time. Within the above results, titanium mesh with lesser pore in number might be recommended for the early bone formation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.123-128
• /
• 1999

Recently, as a performance based design concept is introduced, assurance of expected performances on serviceability and safety in the whole span of life is exactly requested. So, quantitative assessments about durability related properties of concrete in early-age long term are come to necessary, Especially in early age, deterioration which affects long-term durability performance can be occurred by hydration heat and shrinkage, so development of reasonable hydration heat model which can simulate early age behavior is necessary. The micor-pore structure formation property also affects shrinkage behavior in early age and carbonations and chloride ion penetration characteristic in long term, So, for the quantitative assessment on durability performance of concrete, modelings of early age concrete based on hydration process and micor-pore structure formation characteristics are important. In this paper, a micromechanics based hydration heat evolution model is adopted and a quantitative model which can simulate micro-pore structure development is also verified with experimental results. The models can be used effectively to simulate the early-age behavior of concrete composed of different mix proportions.

• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.782-790
• /
• 1999

The compressibility sinterability sintering behaviour and thermal stability of AlOOH added UO2 pellt and PVA-Al(III) complex added UO2 pellet were investigated respectively. Compared with characteristics of AlOOH added UO2 pellet the green density and the sintered density of PVA-Al(III) complex added UO2 pellet were lowered but the grain size and the pore size of that were more increased in accordance with higher compacting pressure. The AlOOH added UO2 pellet had the grain size of about 14${\mu}{\textrm}{m}$ with monomodal pore size distribution while the PVA-Al(III) complex added UO2 pellet had the grain size of about 42 ${\mu}{\textrm}{m}$ with bimodal pore size distribution. The PVA-A(III) complex added UO2 pellet had a similiar open porosity to the AlOOH added UO2 pellet and a lower resintered density change than the AlOOH added UO2 pellet.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1991년도 추계 총회 및 학술발표회
• /
• pp.4-8
• /
• 1991

The characterization of pore properties (mean pore size and pore size distribution) of the active layer in a UF membrane is important not only in order to obtain information about the factors affecting pore formation during membrane manufacturing but also to understand deeply the mechanism of solute and solvent transport through pores. Many methods of characterizing quantitatively the pore properties of UF membranes have been suggested in the literature: solvent and gas flow measurement, bubble point determination, electron microscopy, gas adsorption/desorption measurement, rejection measurement etc. But most of these methods involve time-consuming procedures and involve some wellknown problems and uncertainties.

• Geosciences Journal
• /
• 제22권6호
• /
• pp.1015-1026
• /
• 2018

This paper aims to investigate the good reservoir quality and hydrocarbon potentiality of the Khatatba Formation, Qasr Field in the Shoushan Basin of the North Western Desert, Egypt by combining results from log-based petrophysical analysis, petrographic description and images from scanning electron microscope (SEM). Promising reservoir units are initially identified and evaluated through well log analysis of three wells in the field of study. Petrophysical results are then compared with petrographic and SEM images from rock samples to identify features that characterize the reservoir quality. Well log results show that Khatatba Formation in the study area has good sandstone reservoir intervals from depths ranging from 12848 ft to 13900 ft, with good effective porosity records of 13-15% and hydrocarbon saturations of greater than 83%. Petrographic analysis of these sandstone reservoir units indicate high concentrations of vacant pore spaces with good permeability that can be easily occupied by hydrocarbon. The availability of these pore spaces are attributed to pore-enhancing diagenetic features, mainly in the form of good primary porosity and dissolution. SEM images and EDX analysis confirmed the presence of hydrocarbon, therefore indicating a good hydrocarbon-storing potential for the Khatatba Formation sandstones.

• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.11-18
• /
• 2014

Onggi, which is described as a breathing pottery, has strongly influenced the traditional food culture in Korea. In this study Onggi is compared to porcelains including celadon and white porcelain to analyze the sources of pore formation. The differences in starting materials are examined for chemical and mineralogical compositions, particle size and distribution. The gas permeability of the fired samples is correlated to the matrix microstructure. The broad particle size distribution and high iron oxide content of Onggi are revealed as the major cause for the pore formation. Open pores are formed with large particles in the Onggi body while closed pores have a high iron oxide concentration. The Onggi body with increased open pores leads to the high gas permeability.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.630-633
• /
• 2005

Some gases can be formed into hydrate by physical combination with water under appropriate temperature and pressure condition. Besides them, it was found that the pore size of the sediments can affect the formation and dissociation of hydrate. In this study, formation temperatures of carbon dioxide and methane hydrate have been measured using isobaric method to investigate the effects of flow rates of gases on formation condition of hydrate in porous rock samples. The flow rates of gases were controlled using a mass flow controller. To minimize Memory effect, system temperature increased for the dissociation of gas hydrates and re-established the initial saturation. The results show that the formation temperature of hydrate decreases with increasing the injection flow rate of gas. This indicates that the velocity of gas in porous media may act as kinds of inhibitor for the formation of hydrate.

• Journal of Applied Biological Chemistry
• /
• 제59권3호
• /
• pp.221-225
• /
• 2016

Tolaasin은 Pseudomonas tolaasii에 의해 생성되어 pore를 형성하는 펩티드 독소이며, 인공재배 버섯의 막 구조를 파괴하여 갈반병을 일으킨다. Tolaasin이 막에서 pore를 형성하는 기작이나 특성은 자세히 알려지지 않았으나, 인공 지질이중막에서 tolaasin에 의한 pore 형성은 제시되었다. Tolaasin에 의한 지질막에서의 pore 형성은 드물게 나타났고, 형성된 pore는 불안정하기에 tolaasin pore의 길이와 지질막의 두께가 서로 일치하지 않을 수 있음이 제안되었다. 그러므로, 탄소수가 다른 지방산으로 이루어진 인지질들을 첨가하여 tolaasin에 의한 용혈활성 변화를 측정하였다. 두 개의 decanoic acids (C10:0, 1,2-didecanoyl-sn-glycero-3-phosphoethanolamine; DDPE)와 myristic acids (C14:0, 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine), stearic acids(C18:0, 1,2-distearoyl-sn-glycero-3-phosphoethanolamine)로 이루어진 phosphatidylethanolamine들을 적혈구와 tolaasin 펩티드가 포함된 반응용액에 가했을 때, DDPE만이 tolaasin에 의한 용혈활성을 촉진하였으며, 나머지 두 인지질은 효과를 보이지 않았다. DDPE를 다양한 농도로 처리하였을 때, tolaasin에 의한 용혈활성은 농도의존적으로 증가하였다. 중간길이의 지방산으로 구성된 인지질은 tolaasin pore 구조와 막지질 사이에 결합하여 pore 주변의 막을 얇게 함으로써 tolaasin pore를 안정화시킬 것으로 여겨진다. 본 연구의 결과는 중간 크기의 지방산으로 구성된 인지질이 tolaasin pore를 막 구조에서 안정화시킴으로써 활성을 증가시키며, 이것은 적혈구 막에서 tolaasin pore의 길이가 막의 두께보다 조금 짧을 것이라는 사실을 제안한다.

• BMB Reports
• /
• 제38권5호
• /
• pp.507-516
• /
• 2005

Antimicrobial peptides (AMPs) have been isolated and characterized from tissues and organisms representing virtually every kingdom and phylum. Their amino acid composition, amphipathicity, cationic charge, and size allow them to attach to and insert into membrane bilayers to form pores by 'barrel-stave', 'carpet' or 'toroidal-pore' mechanisms. Although these models are helpful for defining mechanisms of AMP activity, their relevance to resolving how peptides damage and kill microorganisms still needs to be clarified. Moreover, many AMPs employ sophisticated and dynamic mechanisms of action to carry out their likely roles in antimicrobial host defense. Recently, it has been speculated that transmembrane pore formation is not the only mechanism of microbial killing by AMPs. In fact, several observations suggest that translocated AMPs can alter cytoplasmic membrane septum formation, reduce cell-wall, nucleic acid, and protein synthesis, and inhibit enzymatic activity. In this review, we present the structures of several AMPs as well as models of how AMPs induce pore formation. AMPs have received special attention as a possible alternative way to combat antibiotic-resistant bacterial strains. It may be possible to design synthetic AMPs with enhanced activity for microbial cells, especially those with antibiotic resistance, as well as synergistic effects with conventional antibiotic agents that lack cytotoxic or hemolytic activity.