• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.101-110
• /
• 2013

Due to the large specific surface area and great reactivity toward environmental contaminants, nanocrystalline mackinawite (FeS) has been widely applied for the remediation of contaminated groundwater and soil. Furthermore, nanocrystalline FeS is rather thermodynamically stable against anoxic corrosion, and its reactivity can be regenerated continuously by the activity of sulfate-reducing bacteria. However, nanocrystalline mackinawite is prone to either spread out along the groundwater flow or cause pore clogging in aquifers by particle aggregation. Accordingly, this mineral should be modified for the application of permeable reactive barriers (PRBs). In this study, coating methods were investigated by which mackinawite nanoparticles were deposited on the surface of alumina or activated alumina. The amount of FeS coating was found to significantly vary with pH, with the highest amount occurring at pH ~6.9 for both minerals. At this pH, the surfaces of mackinawite and alumina (or activated alumina) were oppositely charged, with the resultant electrostatic attraction making the coating highly effective. At this pH, the coating amounts by alumina and activated alumina were 0.038 and 0.114 $mmol{\cdot}FeS/g$, respectively. Under anoxic conditions, arsenite sorption experiments were conducted with uncoated alumina, uncoated activated alumina, and both minerals coated with FeS at the optimal pH for comparison of their reactivity. Uncoated activated alumina showed the higher arsenite removal compared to uncoated alumina. Notably, the arsenite sorption capacity of activated alumina was little changed by the coating with FeS. This might be attributed to the abundance of highly reactive hydroxyl functional groups (${\equiv}$AlOH) on the surface of activated alumina, making the arsenite sorption by the coated FeS unnoticeable. In contrast, the arsenite sorption capacity of alumina was found to increase substantially by the FeS coating. This was due to the consumption of the surface hydroxyl functional groups on the alumina surface and the subsequent occurrence of As(III) sorption by the coated FeS. Alumina, on the surface area basis, has about 8 times higher FeS coating amount and higher As(III) sorption capacity than silica. This study indicates that alumina is a better candidate than silica for the coating of nanocrystalline mackinawite.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.5
• /
• pp.767-773
• /
• 1998

In this study, we have investigated the distributions and killing effects of marine bacteria that tend to kill the red tide microalgae, C. polykikoides in the area of Masan bay from June to October, 1996. To summarize, C. polykikoides killing bacteria were detected at $10^2$ to $10^3$ cells/ml of seawater samples during the survey period, and the bloom was observed in September by containing $4.8\times10^3$cells/ml. It appears however that the number of these bacteria is decreased ($2.0\times10^2$cells/ml) in October, A total of 110 strains were isolated from seawater samples and seawater filtrate (pore size, 0.8 $\mu$m)-containing mixed culture of C. polykikoides in which the mixed culture was grown in f/2 medium. As results we have successfully isolated Micrococcus sp. LG-1 which decreased to less than 10cells/ml within 6days and 5days sfter inoculation of Micrococcus sp. LG-1 into the la9 and logarithmic growth phases of C. polykrikoides respectively. Therefore, it appears that inoculation of Micrococcus sp. LG-1 against the logarithmic C. polykrikoides is more effective than the lag growth phase, (n addition, the killing effects were increased in accordance with bacterial cell densities inoculated in a dose dependent manner. Especially, the filtrate of kitling bacterium culture (nore size, 0.2 $\mu$m) revealed a dramatic effect in which C. polykrikoides were decreased to less than 10 cells/mf of culture within 1 hr, 1,5 hrs, 1,5 hrs, 3.5 hrs. and 5,5 hrs after inoculations of the culture filtrate with concentration of $30\%,\;20\%,\;10\%,\;5\%$ and $2.5\%$, respectively. Moreover Micrococcus sp. LG-1 showed a selective specificity against C. polykrikoides and any other killing effects of Micrococcus sp. LG-1 were not observed against Alexandrium tamarense, Prorocentrum micans, Scrippsiella trochoidea. ana Gymnodinium sanguineum.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.329-336
• /
• 2016

Occurrence of oriental corn borer, Ostrinia furnacalis, and yield in a paddy-upland rotation field for 8 maize (Eolrukchal 1, Heugjeom 2, Miheukchal, Ilmichal, Heukjinjuchal, Chalok 4, Mibaek 2, Daehakchal) and 7 sorghum (Hwanggeumchal, Anzunbaengisusu, Moktaksusu, Sodamchal, DS-202, Nampungchal, Donganme) varieties has been surveyed. In a monitoring study using a pheromone trap carried out from 15 May to 10 September, the density of O. furnacalis adults increased rapidly from about 2 weeks after maize planting and reached the highest density at mid June. After that, their density was fluctuated a little at earlier September. The number of the damaged maize and invasive pores on the stem of 2 maizes and sorghum varieties was examined. The mean number of the damaged maize per 20 plants was 19 and 18 plants, and the number of invasive pores was 1.8 and 1.4 per maize stem in Daehakchal and Mibaek 2, respectively. In a survey carried out at harvest period using 8 maize varieties, the damaged ratio was 94%, 92%, 71%, 64%, 54%, 52%, and 45% in Daehakchal, Mibaek 2, Ilmichal, Eolrukchal 1, Chalok 4, Miheukchal, and Heugjeom 2, respectively. The number of invasive pore per Ilmichal stem was 1.4 and that of the others was less than 1.0 per stem. In addition, the damaged ratio of maize ears was 50% in Ilmichal, 40% in Heukjinjuchal, 37% in Daehakchal, etc. The damage pattern of 2 sorghum varieties, Nampungchal and Donganme, by O. furnacalis larvae was steeply increased from planting to 2 months and the trend was continued up to earlier August. At this time, the mean number of damaged sorghum was 13 and 9.2 plants for Nampungchal and Donganme, and the number of invasive stem pores was 1.06 and 0.46, respectively. In another survey carried out at harvest period for 7 sorghum varieties, their damaged ratio was 95% in DS-202, 76% in Moktaksusu, 75% in Sodamchal, 67% in Nampungchal, 57% in Anzunbaengisusu, 46% in Donganme, and 34% in Hwanggeumchal. The damage of sorghum varieties was much higher and severer than that of maizes by O. furnacalis larvae. The number of invasive pores on a sorghum stem was 1.7 in DS-202, 1.4 in Moktaksusu, 1.3 in Sodamchal, 1.1 in Nampungchal, 1.0 in Anzunbaengisusu, 0.5 in Donganme, and 0.4 in Hwanggeumchal. Meanwhile, there was no distinct connection between damaging results and yields of maizes and sorghums by O. furnacalis larvae in a paddy-upland rotation field. These results from this study can be applicable for the establishment of a management strategy to control Oriental corn borer in paddy-upland rotation fields for maize and sorghum.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.127-136
• /
• 2015

To evaluate the effects of limestone powder and silica fume on the properties of high-strength high-volume ground granulated blast-furnace slag (GGBFS) blended cement concrete, this study investigated the rheology, strength development, hydration and pozzolanic reaction characteristics, porosity and pore size distribution of high-strength mortars with the water-to-binder ratio of 20, 50 to 80% GGBFS, up to 20% limestone powder, and up to 10% silica fume. According to test results, compared with the Portland cement mixture, the high-volume GGBFS mixture had much higher flow due to the low surface friction of GGBFS particles and higher strength in the early age due to the accelerated cement hydration by increase of free water; however, because of too low water-to-binder ratio and cement content, and lack of calcium hydroxide content, the pozzolanic reactio cannot be activated and the long-term strength development was limited. Limestone powder did not affect the flowability, and also accelerate the early cement hydration. However, because its effect on the acceleration of cement hydration is not greater than that of GGBFS, and it does not have hydraulic reactivity unlikely to GGBFS, compressive strength was reduced proportional to the replacement ratio of limestone powder. Also, silica fume and very fine GGBFS lowered flow and strength by absorbing more free water required for cement hydration. Capillary porosities of GGBFS blended mortars were smaller than that of OPC mortar, but the effect of limestone powder on porosity was not noticeable, and silica fume increased porosity due to low degree of hydration. Nevertheless, it is confirmed that the addition of GGBFS and silica fume increases fine pores.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.47-56
• /
• 2014

In winter season, the pore water inside the ground freezes and thaws repetitively due to the cold air temperature. When the freezing-thawing processes are repeated on the ground, the change in soil particle structure occurs and thus the damage of the infrastructure may be following. This study was performed in order to investigate the stiffness change of soils due to the freeze-thaw by using elastic waves. Sand-silt mixtures are prepared with in the silt fraction of 40 %, 60 % and 80 % in weight and in the degree of saturation of 40 %. The specimens are placed into the square freezing-thawing cell by the temping method. For the measurement of the elastic waves, a pair of the bender elements and a pair of piezo disk elements are installed on the cell, and a thermocouple is inserted into soils for the measurement of the temperature. The temperature of the mixtures is decreased from $20^{\circ}C$ to $-10^{\circ}C$ during freezing, is maintained at $-20^{\circ}C$ for 18 hours, is gradually increased up to the room temperature of $20^{\circ}C$ to thaw the specimens. The shear waves, the compressional waves and the temperature are measured during the freeze-thaw process. The experimental result indicates that the shear and the compressional wave velocities after thawing are smaller than those of before freezing. The velocity ratio of after thawing to before freezing of shear wave is smaller than that of the compressional wave. As silt fraction increases from 40 % to 80 %, the shear and compressional wave velocities are gradually increased. This study suggests that the freezing-thawing process in unsaturated soil loosens the soil particle structure, and the shear wave velocity reflects the effect of freezing-thawing more sensitively than the compressional wave velocity.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.994-1001
• /
• 2008

Freundlich isothermal adsorption parameters, applicable to such biofilter-model as process-lumping model(Lim's model), for sterilized granular activated carbon(GAC), sterilized compost and sterilized equal volume mixture of GAC and compost were obtained and were compared each other, assuming that adsorbents are enclosed by water layer, in order to construct robust process-lumping biofilter model effective for wide-range of hydrophilic volatile organic compounds(VOC). In this investigation 0.04, 0.08, 0.12, 0.16, 0.2, 0.4, 0.8 and 1.0ml of ethanol were added to three kinds of adsorbent-media and were placed at $30^{\circ}{\cdots}$ under the wet condition of the media, which was the same as biofilter operating condition, until the adsorption reached the condition of equilibrium before each adsorbed amount of ethanol was obtained. Then adsorption capacity parameters(K) and adsorption exponents of Freundlich adsorption isotherm equation, which simulates the adsorbed amount of ethanol equilibrated with the ethanol concentration of the condensed water in the pore of the media, were constructed for sterilized granular activated carbon(GAC), sterilized compost and sterilized equal volume mixture of GAC and compost as (0.7566 and $5.070{\times}10^{-7}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.7566}$), (0.8827 and $1.000{\times}10^{-8}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.8827}$) and (0.5688 and $5.243{\times}10^{-6}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.5688}$), respectively. These Freundlich isothermal adsorption parameters were applicable to the adsorption characteristics of biofilter media enclosed with bio-layer. The order of magnitude of the ratio of ethanol-air/water partition coefficient and toluene-air/water partition coefficient was almost consistent to that of ethanol-adsorbed amounts in this experiment with compost and in the investigation of Delhomenie et al. on toluene-adsorption to wet compost.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.181-187
• /
• 2004

Preparations of mesoporous materials using various templates and their applicability have been intensively investigated for many years. We studied on synthesizing mesoporous Ti02 with pores in which sensitive compounds having weak physico-chemical properties such as thermal or UV irradiation and low solubility in solvent are trapped. Prior to trapping OMC in the pores of mesoporous titania, OMC was nano-emulsified in O/W system using Lecithin. Thereafter the OMC was trapped in the pores of mesoporous titania using sol-gel method. Main focus of this work is to prepare OMC-trapped mesoporous titania and to trace the stability and solubility of nano-emulsified OMC in the pores of mesoporous titania, and compared with that of mesoporous silica. OMC-trapped mesoporous Inorganic-Organic hybrid titania showed higher factors in sun protecting and a skin penetration phenomenon was reduced.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.311-321
• /
• 2008

In order to improve the insufficient protein content of Jeung-Pyun with respect to sitology, as well as its fermentation process, this study prepared Jeung-Pyun doughs containing 0, 5, 10, 15, and 20 g of milk, respectively, and examined their mechanical and functional characteristics. The internal structure of the Jeung-Pyun was observed by SEM. With regard to color, the L-value increased with increasing amounts of added milk, and the highest value (65.43) occurred in the group containing 20 g of added milk; however, there were no significant differences among groups. The group containing 20 g of added milk also presented the highest a-value, and the samples with added milk had higher b-values than the control. At 8 hours of fermentation, the 10 g- and 15 g-added milk groups had viscosities of 5726.67 and 6600 respectively; viscosity increased with increasing amounts of milk, and the added-milk groups had significantly higher values than the control group. Hardness also increased with increasing amounts of added milk. However, there were no significant differences in resilience and cohesive power among the groups. The groups containing 5 and 10 g of added milk had the lowest cohesion and break values. For appearance, the group without added milk had the whitest color. Pore size decreased and showed less uniformity as the amount of added milk increased. The unique tackju aroma of Jeung-Pyun decreased significantly as the level of added milk increased, and the 20 g addition presented the lowest value. The 10 g-added milk group had the highest level of sweetness, and sourness increased with increasing amounts of added milk. For softness, the control group was estimated as slightly softer than the added-milk groups. The stickiest sample was generally preferred when considering taste, white color, and sweetness. Among the quality characteristics, having greater stickiness, resilience, moisture, and softness was better in terms of chewing. Overall, the size of the Jeung-Pyun containing 10 g of milk was even and well-developed.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• Childhood Kidney Diseases
• /
• v.14 no.1
• /
• pp.22-31
• /
• 2010

Purpose : This study was performed to evaluate the relationship between glomerular basement membrane (GBM) alterations to epithelial cell (EpC) structure and renal function in Alport Syndrome (AS) patients. Methods : Fifteen patients diagnosed with AS (4-26yrs) were examined. The GBM in AS was categorized as : C1) normal, C2) minor alterations (widening of lamina rara interna or externa without lamina densa change), C3) nonspecific splitting of lamina densa, C4) basket-weaving pattern of lamina densa splitting. The length of each GBM portion along the epithelial side was measured on the systematically obtained electron microscopic photographs. Furthermore to obtain an objective assessment of the degree of glomerular EpC foot process change, the number of slit pores along $10\;{\mu}m$ of peripheral GBM in each category was obtained. Results : The percentage of normal GBM portion (C1) correlated inversely with daily protein excretion (g/day/$m^2$, P<0.05) and sum of the percentage of abnormal GBM portion (C2+C3+C4) had direct correlation with daily protein excretion (g/day/$m^2$, P<0.05). There were no significant relationships between the percentages of other categories of GBM alterations and creatinine clearance or protein excretion. There were no significant relationships between of creatinine clearance in relation to normal GBM(C1) portion as well as that in relation to sum of the percentage of abnormal GBM portion (C2+C3+C4). GBM abnormality did not correlate with age at biopsy. Conclusion : The extent of GBM structural abnormality is related to proteinuria in AS but the epithelial response is uniform even though the GBM ultrastructural lesions are not.