• KSBB Journal
• /
• 제15권3호
• /
• pp.313-317
• /
• 2000

In this paper enantioselective production of levofloxacin by porcine liver esterase was investigated, To enhance the produc0-tivity various factors which affect the enzyme activity and the enantioselectivity were optimized, In terms of temperature and pH 45$^{\circ}C$ and 4.8 were found to be the best conditions for enzyme reaction. Addition of ofloxacin butyl ester the substrate at the concentration of 5 g/L was desirable to avoid the product inhibition and the activity of porcine liver esterase was maintained up to 72 hours.In addition to enhance the availability of substrate effect of solvent was also examined. It was found that the application of 5% (v/v) of acetone acetonitrile and dimethylsulfoxide did not increase the conversion of substrate and the presence of 5%(v/v) butanol inhibited the enzyme activity significantly.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권3호
• /
• pp.179-182
• /
• 2001

Porcine liver esterase was immobilized in polyacrylamide gel for the enantioselective production of levofloxacin from ofloxacin butyl ester. The initial activity of immobilized esterase was found to be significantly affected by the polyacrylamide gel composition. The optimum concentrations of monomer and crosslinker were determined to be 20% and 8.3%, respectively. The activity of immobilized esterase was 55.4% compared to a free enzyme. Enantiomeric excess was maintained at 60%, almost the same level as that of free enzyme. In addition, the immobilized esterase could be used repeatedly up to 10 times without experiencing any severe loss of activity and enantioselectivity.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1375-1376
• /
• 1998

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.193-213
• /
• 1995

The purpose of this study is to investigate a possible contribution of nonspecific esterases, which occur in the oral cavity, to the degradation of ester bonds in polymethacrylates. One of the problems connected with the use of composite resins for restorations is their inadequate resistance to wear. It has been shown that methacrylate hydrolysis can be catalyzed by enzymes and that a carboxylic hydrolase (porcine liver esterase) catalyzed the hydrolysis of several mono - and dimethacrylates. The softening effect on a BISGMA/TEGDMA polymer induced by hydrolase will accelerate the in vivo wear of the polymer. Porcine liver esterase (EC 3.1.1.1) 3.2 mol/L $(NH_4)_2$ $SO_4$ was obtained from Sigma Chemical Company. The esterase activity of one unit is defined as the amount of enzyme capable of hydrolyzing $l{\mu}mol$ ethyl butyrate per min at pH 8.0 AT $25^{\circ}C$. Phosphate buffer, 10mmol/L, pH 7.0, was made by adjustment of a solution of $Na_2HPO_4$ with $H_3PO_4$. Composite resins used in this study are Silux Plus, Z-100, Durafil VS, and Prisma APH. Cylindrical specimens, 14mm in diameter and 3mm thick, of Silux Plus, Z-100, Durafil VS, Prisma APH were polymerized under the celluloid strip. 60 specimens were divided into 2 groups. One group was emersed only in buffer solution, the other group was emersed in buffer and enzyme solution. Silux Plus and Z-100 were divided into 2 subgroups, one subgroup was cured only Visilux 2. And the other subgroup was cured Visilux 2 and Triaid II. Thereafter, specimens were polished to its best achievable surface according to manufacture's directions. The Vickers hardness of the specimens was measured after 1, 2, 4, 7, 9, 15, 50 days. The solutions were changed after each measurement. Composite resin surfaces were evaluated for the surface roughness with profilometer (${\alpha}$-step 200, Tencor instruments, USA) after 1 and 50 days. And then surfaces of specimens were pictured with stereosopy after 1 and 50 days. The results were as follows. 1. The surface hardness of Silux plus, durafil VS, and Prisma APH were decreased with time. But, the surface hardness of Z-100 was not decreased. 2. The surface hardness of all composite resins was decreased by esterase. 3. Composite resins, which were light-cured by Visilux 2 and concomitantly baked by oven, showed more hardened surface than light-cured by Visilux 2 only. 4. Significant surface changes were occured in Silux plus after esterase treatment.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.662-665
• /
• 2001

PLE를 이용한 levofloxacin의 생산에서 기질 150 mM 사용의 경우 두배의 몰농도 로 ${\alpha}-CD$를 사용하여 산물의 생산량을 3.7 배까지 증가시킬 수 있었다. 그러나 이 경우 ${\alpha}-CD$의 사용량이 많아 경제성이 떨어지는 단점이 있다. 이에 같은 몰농도로 ${\alpha}-CD$를 사용하고 pH에 변화를 주어 용해도를 향상시켜 보았다. 기질 100 mM의 경우 pH 5.6에서 같은 몰농도의 ${\alpha}-CD$를 사용한 경우 ${\alpha}-CD$를 사용하지 않은 것에 비해 4.4배의 수율의 증대가 있었다.