• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.439-447
• /
• 2019

임플란트 식립 시 자연치와 임플란트 사이의 간격은 치주 조직 보존 및 심미에 중요한 요소이다. 또한 고정성 치아 수복 시 치아의 비정상적 위치 이동과 경사 이동은 의도적 근관치료를 필요로 할 수도 있고 저작효율에 불리하게 작용하기도 한다. 본 증례에서는 치열이 불균일하고 붕괴된 교합을 가진 환자에서 완전구강회복을 시행하기에 앞서 치아재배열을 위한 교정치료를 진행하였다. 환자는 통증이나 소리와 같은 측두하악관절장애 증상 및 불편감이 없으므로 교정치료를 진행하는 데 무리가 없었다. 임플란트 식립 전부터 시작한 교정치료를 임플란트 임시 보철물 시적 후에도 진행하였고 전치부 보호 및 심미를 위하여 교합고경을 전치부 기준 2 mm 거상하였다. 교정치료 완료 후 임플란트 및 자연치에 도재전장금관(Porcelain-fused-to-metal crown, PFM crown) 혹은 브릿지(bridge)로 최종 수복하였다. 환자의 치열 개선 및 무치악부 수복으로 기능적, 심미적으로 만족할 만한 결과를 보였다.

• 대한치과보철학회지
• /
• 제52권3호
• /
• pp.246-251
• /
• 2014

CAD/CAM을 이용하여 보철물을 제작할 경우 교합 접촉점의 위치, 면적, 형태를 원하는 대로 조절할 수 있으므로 보다 기능적인 교합의 부여가 가능하다. 또한 전통적인 Casting 기법을 이용한 주조금속 보철물이나, Porcelain의 축성을 통해 제작된 보철물에 비하여 제작과정 중의 오차가 감소하여 우수한 교합 정확도를 얻을 수 있을 것으로 기대되고 있다. 그리고 최근 소개되고 있는 CAD/CAM system에는 가상 교합기 기능이 추가되어 단일 수복물의 설계에서도 상악에 대한 하악의 운동을 재현함으로써 폐구 운동 뿐만 아니라 전/측방 운동시의 교합간섭을 고려할 수 있게 되었다. 그 동안 zirconia를 이용한 보철물의 변연 및 내면 적합도에 대한 연구는 많이 이루어졌으나 CAD/CAM을 이용해 설계된 zirconia crown의 교합 적합도에 대한 연구는 많이 이루어지지 않았다. 따라서 본 증례에서는 총 5명의 환자에서 CAD/CAM을 이용하여 제작된 7개의 지르코니아 크라운을 대상으로, 처음 설계된 zirconia crown의 교합 접촉점과 조정과정을 거쳐 구강 내 시적 후에 제작된 모델을 스캔하여 획득된 교합 접촉점을 비교하여 보철물의 정확도를 평가하고 교합조정의 양상을 파악해 보고자 하였다. 지르코니아 크라운에서 이루어진 교합조정은 대부분 기능교두 및 사면부위에서 이루어졌으며 15 - $60{\mu}m$의 분포를 보였다. CAD/CAM을 이용하여 제작된 지르코니아 크라운에서 어느정도의 교합조정은 불가피한 과정이며 이에 따른 물성저하를 보상하기 위한 추가적인 과정이 필요할 것이다.

• 대한치과기공학회지
• /
• 제16권1호
• /
• pp.57-77
• /
• 1994

The purpose of this study is to investigate the extent to which dental laboratories use proper materials, procedures, devices, and equipments to fabricate crown & bridge, PFM(Porcelain Fused to Metal) crown & bridge, partial denture, complete denture, and other prosteses. 100 laboratories in Seoul were selected for this investigation. Questionnaires were constructed focusing on five topocs:crown & bridge, PFM crown & bridge, partial denture, complete denture, and other prostheses. The results from this survey were as follows : 1. Most dental laboratories used old, inexpensive, and familiar materials rather than newly developed ones. 2. Most of the dental technicians did not stick to the standard procedures of handling materials, but to their own experiences. 3. Newly developed equipments to fabricate dental prostheses were possessed by nearly 30% dental laboratories. 4. About 80% of dental laboratories were using the procedures they had learned in the school : die trimming for accurate crown margin and softening heat treatment after RPD gold casting. But less than 30% of laboratories were shown to follow the boxing procedure to produce master cast and laboratory remounting in the process of complete denture. The findings show that dental laboratory procedures to fabricate dental prostheses are incomplete and inaccurate in some instances. So, further studies are neededs to clarify the causes of some inaccurate procedures, the better and more equipments should be supplied to produce the more accurate dental posthesis, and more efforts at enancing the appropriate use of dental materials and procedures should be made.

• 구강회복응용과학지
• /
• 제18권2호
• /
• pp.113-118
• /
• 2002

Long bridge가 필요한 구강암종환자에게 자기공명영상을 촬영하여야 하는 경우, fiber reinforced polymer ceramics로 잠정보철물을 제작해준 경우 충분한 파절 저항성과 심미성을 얻을 수 있었다. 하지만, 여기에 대한 장기간의 연구와 관찰이 필요하리라 사료된다.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.181-188
• /
• 2020

PURPOSE. The effect of core design on the fracture resistance of zirconia-lithium disilicate (LS2) bilayered crowns for anterior teeth is evaluated by comparing with that of metal-ceramic crowns. MATERIALS AND METHODS. Forty customized titanium abutments for maxillary central incisor were prepared. Each group of 10 units was constructed using the same veneer form of designs A and B, which covered labial surface to approximately one third of the incisal and cervical palatal surface, respectively. LS2 pressed-on-zirconia (POZ) and porcelain-fused-to-metal (PFM) crowns were divided into "POZ_A," "POZ_B," "PFM_A," and "PFM_B" groups, and 6000 thermal cycles (5/55 ℃) were performed after 24 h storage in distilled water at 37 ℃. All specimens were prepared using a single type of self-adhesive resin cement. The fracture resistance was measured using a universal testing machine. Failure mode and elemental analyses of the bonding interface were performed. The data were analyzed using Welch's t-test and the Games-Howell exact test. RESULTS. The PFM_B (1376. 8 ± 93.3 N) group demonstrated significantly higher fracture strength than the PFM_A (915.8 ± 206.3 N) and POZ_B (963.8 ± 316.2 N) groups (P<.05). There was no statistically significant difference in fracture resistance between the POZ_A (1184.4 ± 319.6 N) and POZ_B groups (P>.05). Regardless of the design differences of the zirconia cores, fractures involving cores occurred in all specimens of the POZ groups. CONCLUSION. The bilayered anterior POZ crowns showed different fracture resistance and fracture pattern according to the core design compared to PFM.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.366-374
• /
• 2000

FRC/ceromer system provides the clinician with a durable, flexible, and esthetic alternative to conventional porcelain fused to metal crowns. FRC is the matrix which is silica-coated and embedded in a resin matrix. The ceromer material which is a second generation indirect composite resin contains silanized, microhybrid inorganic fillers embedded in a light-curing organic matrix. FRC/ceromer restoration has a several advantages: better shock absorption, less wear of occluding teeth, translucency, color stability, bonding ability to dental hard tissues, and resiliency. It has versatility of use including inlay, onlay, single crown, and esthetic veneers. With adhesive technique, it can be used for single tooth replacement in forms of inlay adhesion bridge. In single tooth missing case, conventional PFM bridge has been used for esthetic restoration. However, this restoration has several disadvantages such as high cost, potential framework distortion during fabrication, and difficulty in repairing fractures. Inlay adhesion bridge with FRC/ceromer would be a good alternative treatment plan. This article describes a cases restored with Targis/Vectris inlay adhesion bridge. Tooth preparation guide, fabrication procedure, and cementation procedure of this system will be dealt. The strength/weakness of this restoration will be mentioned, also. If it has been used appropriately in carefully selected case, it can satisfy not only dentist's demand of sparing dental hard tissue but also patient's desire of seeking a esthetic restorations with a natural appearance.

• Journal of Oral Medicine and Pain
• /
• 제20권2호
• /
• pp.317-325
• /
• 1995

This study was performed to investigate the mean life expectancy of dental prosthetic restorations. The author has examined 352 dental prosthesis clinically and radiologically, and decided the success(survival) and failure(mortality) of the dental prosthesis. The dental prosthesis which had been treated in the Seoul National University Dental Hospital, two private clinics in Seoul, one university dental hospital, and two private clinics in local province were included in this study. The survival analysis using product limit estimator was used and the mean life expectancy of each type of dental prosthesis was calculated. The results were as follows : 1. The life expectancies were 10.5 years in gold crown and bridge, 8.5 years in porcelain fused to metal crown and bridge, 8.3 years in nonprecious metal crown and bridge, 8.1 years in removal partial denture, and 7.7 years in full denture. 2. The causes of mortality were in the order of dental caries(24.6%), fracture of dental prosthesis(19.2%), periodontal problems(18.6%), chronic chewing difficulty and dysfunction due to dental prosthesis(15.0%), excessive exposure of abutments due to the marginal defect of dental prosthesis(14.4%), abnormal occlusion due to severe attrition of artificial teeth in dentures(3.0%), periapical problems(2.4%), perforation of dental prosthesis(1.8%), and loose contacts with neighboring tooth(1.2%). 3. Among survival cases, 66.5% showed normal chewing ability and 31.9% showed partial chewing ability. However, 1.6% of them complained loss of chewing ability. 4. Among failure cases, 6.6% showed normal chewing ability and 38.9% showed partial chewing ability. However, 54.5% of them complained loss of chewing ability.

• 대한치과의사협회지
• /
• 제52권2호
• /
• pp.96-104
• /
• 2014

The aim of this study was to investigate the frequency of positive patch test reaction to dental materials in patients with oral mucosal diseases. Epicutaneous patch test was performed in 110 patients with oral mucosal diseases; 41 patients with oral lichen planus(OLP), 44 patients with burning mouth syndrome(BMS), 25 patients with other oral mucosal diseases including recurrent aphthous ulcer and mucous membrane pemphigoid. The obtained results were as follows: Oral gold restorations were most common in patents with oral mucosal diseases and porcelain fused metal crown, implant appeared in the order. 33 of 110 patients did not appear skin reactions (negative, 30%) and 77 patients (positive, 70%) had skin reactions including redness, rash, blisters. Dental materials causing positive reaction to patch test were mainly as gold-sodium-thiosulfate (26.7%), nickel sulfate(Ni) (22.7%), cobalt chloride(Co) (14.7%), palladium chloride(Pd) (11.9%), potassium dichromate (10.7%) in order, respectively. In conclusion, old metal restorations could be the cause of oral mucosal diseases and epicutaneous patch test could be used as a tool to improve the oral conditions.

• 한국콘텐츠학회논문지
• /
• 제10권11호
• /
• pp.228-234
• /
• 2010

치과도재용 합금으로 사용되는 합금 중 베릴륨이 함유된 비귀금속 Ni-Cr합금과 베릴륨이 함유되지 않은 비귀금속 Ni-Cr합금 그리고 베릴륨이 함유되지 않은 비귀금속 Co-Cr 합금과 세라믹간의 결합강도와 파절양상 그리고 계면특성을 분석하고자 하였다. 결합강도는 만능시험기를 이용하여 전단력시험을 통하여 전단결합력을 측정하였으며, 전단시험에 의한 파단면을 이용하여 파절양상을 관찰하였다. 그리고 합금-도재간의 계면을 관찰하였다. 전단결합강도 측정 결과, 베릴륨이 포함된 T-3가 41.13(${\pm}5.11$)MPa로 가장 높게 나타났으며, 베릴륨이 포함된 VeraBond(40.72(${\pm}5.98$)MPa), Co-Cr 합금인 Wirobond(38.40(${\pm}9.66$)MPa), 베릴륨이 포함되지 않은 Verabond 2V(32.77(${\pm}4.31$)MPa), Bellabond N(28.63(${\pm}6.39$)MPa), Bellabond plus(24.97(${\pm}6.13$)MPa), Argeloy N.P. Star(22.69(${\pm}3.41$)MPa) 순으로 나타났다. 비귀금속 합금들과 세라믹간의 파절양상은 모든 시편에서 금속표면에 세라믹이 일부 부착된 복합파절(mixed failure) 양상을 보였다.

• 대한치과기공학회지
• /
• 제23권2호
• /
• pp.75-93
• /
• 2002

This research was preformed for the purpose of preparing the items of standard model of the national dental technician test base on the duty analysis of the dental technician. The results of the duty analysis for the dental technician follows. 1. The dental technician is a profession to make the oral function smooth through the dental supplement and equipment in a scientific method and the skilled technique. 2. The duty of the dental technician are determined as A. preparation for manufacture B. manufacture C. management of the place of the dental technology D. self-development. A. The field of "the preparation for manufacture" are determined as 1. to confirm work authorization 2. To confirm the working model, B. The field of "In manufacture" are determined as 1. to manufacture the temporary crown 2. to manufacture the inlay and crown & bridge prosthesis 3. to manufacture the porcelain fused metal crown prosthesis 4. to manufacture the all ceramic crown prosthesis 5. to manufacture the temporary denture prosthesis 6. to manufacture the partial denture prosthesis 7. to manufacture the complete denture prosthesis 8. to manufacture the attachment prosthesis 9. to manufacture implant prosthesis 10. to manufacture the removable orthodontic device, 11. to manufacture the fixed orthodontic device, 12. to manufacture the orthodontic study cast C. The field of "in management of the dental lab." are determined as 1. management 2. to control the dental lab. D. The field of "In the self-development" are determined as 1. to improve the professionalism 2. self-control. 3. The developing items selected under the duty evaluation of the dental technician are l7s in the manufacture preparation, 1,011s in the manufacture, 7s in the management for the dental technology, 5s in self-development, and in all together 1,040s