• 한국세라믹학회지
• /
• 제36권1호
• /
• pp.61-68
• /
• 1999

층상구조를 이루는 재료의 소결시 형성되는 다양한 결함 및 잔류응력을 고찰하기 위해 TZP-SUS계 및 ZT/SUS계다층재료와 porcelain/alumina 및 porcelain/Y-TZP 이층재료를 소결법으로 제조하였다. 상압소결로 제조한 다층재료에서는 층간의 소결수축율 차이에 의해 warping, splitting, 균열 등의 소결결함이 관찰되었으며, 중간층수 및 두께의 조절과 출발물질의 제어를 통해 이러한 소결결함이 완화됨을 알 수 있었다. Tape casting법으로 제조한 다층재료에서는 소결시 가한 압력에 의해 소결결함, 특히 warping이 제어됨을 확인할 수 있었다. 이층재료에서 형성되는 잔류응력은 vickers 압입법으로 관찰하였다. Porcelain/alumina에서는 porcelain 측의 계면에 작은 인장응력이, porcelain/Y-TZP에서는 압축응력이 형성됨을 확인할 수 있었으며, 이러한 잔류응력은 이층재료의 강도에도 영향을 미침을 알수 있었다. 결국 다층재료의 소결결함 및 잔류응력은 재료설계와 출발물질 상수에 영향을 받는다는 것을 알 수 있었다.

• 대한치과보철학회지
• /
• 제18권1호
• /
• pp.49-57
• /
• 1980

The adhesive mechanisms on the metal-ceramic restorations have been reported to be mechanical interlocking, chemical bonding, compressive force, and Van der Waal's force, etc. Of these, the mechanical interlocking and chemical bonding forces are thought to affect the adhesive force between Ni-Cr alloy and porcelain. This study investigates the adhesion of Ni-Cr alloy to porcelain according to surface treatment. For this purpose, the following experiments were made; The compositions of Ni-Cr alloy as cast by emission spectrograph, and the oxides produced on Ni-Cr alloy during degassing at $1850^{\circ}F$ for 30 minutes in air and in vacuum were analyzed by X-ray diffractograph. The metal phases of Ni-Cr alloy were observed according to porcelain-baking cyclic heat treatment by photo microscope and the distribution and the shift of elements of Ni-Cr alloy and porcelain and the failure phases between Ni-Cr alloy and porcelain by scanning electron microscope. The adhesive force between Ni-Cr alloy and porcelain was measured according to surface treatment with oxidization and roughening by Instron Universal Testing Machine. Results were as follows; 1. The metal phases of Ni-Cr alloy as cast and degassing state showed the enlarged and fused core, but when subjected to porcelain-baking cyclic heat treatment, showed a dendrite growing. 2. The kinds of metal oxides produced on Ni-Cr alloy during degassing were found to be NiO and $Cr_2O_3$. 3. The distribution of elements at the interface of Ni-Cr alloy and porcelain in degassing state showed demarcation line, but in roughening state, showed mechanical interlocking phase. 4. The shift of elements at the interface occurred in both states, but the shift amount was found to be larger in roughening than in degassing. 5. The adhesive force between Ni-Cr alloy and porcelain was found to be $3.45{\pm}0.93kg/mm^2$, in degassing and $3.82{\pm}0.99kg/mm^2$, in roughening. 6. The failure phase between Ni-Cr alloy and porcelain showed the mixed type failure.

• 헤리티지:역사와 과학
• /
• 제55권2호
• /
• pp.214-230
• /
• 2022

이 글은 조선 16~17세기 관요(官窯)에서 제작된 '별(別)'명 백자의 성격과 제작 배경을 규명하는 데 목적이 있다. '별'명 백자는 1560년대 이후 '좌(左)·우(右)'명 백자와 함께 관요 백자의 이원적(二元的)인 명문 체계를 구성하였다. 그러나 지금까지 '별'명 백자에 관한 연구는 부족하였다. 이에 따라 15~17세기 관요 백자에 새겨지는 명문의 흐름을 종합적으로 이해하기 어려웠다. '별'명 백자는 1560년대부터 1640년대까지 관요에서 생산되었다. 관요는 연례진상자기(年例進上磁器) 이외에 왕실이나 조선 조정의 요구에 대응하여 별기(別器)를 제작·공급하였다. '별'명 백자는 별번(別燔)을 통해 생산한 별기이다. 별기는 사용 목적에 따라 크게 국용(國用)과 내용(內用)으로 구분된다. 다만, 그릇에 '별(別)'만 표기되어 있는 경우에는 기명의 성격을 정확히 언급하기 어렵다. 연례진상자기가 별기로, 별기가 또 다른 목적으로 전용(轉用)되면서 소비와 관련된 명문이 백자에 점각(點刻)되었다. 16세기 왕실은 신유공안(辛酉貢案)을 바탕으로 백자 소비를 확대하였다. 왕실은 1560년대 관요의 운영 상황이 악화된 상황에서 최상품(最上品) 별기를 안정적으로 공급받기 위해 '별'이라는 명문을 활용하였다. 관요 백자는 생산단계에서부터 연례진상자기인 '좌·우'명 백자와 별기인 '별'명 백자로 구분·관리되었다. '별'명 백자는 1640년대까지 제작되었다. 1640년대 중·후반은 관요에서 별번이 일시적으로 정지되었다. 1659년경부터는 연례진상자기를 만드는 백토(白土)와 별기 소용 백토를 다른 지역에서 공급받았다. 당시 연례진상자기는 원주토(原州土)·서산토(瑞山土), 별기는 경주토(慶州土)·선천토(宣川土)를 원료로 사용하였다. 문헌(文獻)에 의하면 경주토·선천토가 원주토·서산토에 비해 훨씬 정결(精潔)하였다. 별번은 백토부터 별도로 채굴·관리하는 체계로 전환되었다. 따라서 특정한 명문을 통해 별기를 별도로 관리할 필요성이 감소되었고, 결국 '별'명 백자는 소멸된 것으로 판단된다.

• 대한소아치과학회지
• /
• 제35권2호
• /
• pp.195-204
• /
• 2008

치아 우식증과 침식증의 진단과 본 연구는 교정용 밴드 사용의 대안으로 제시된 직접 부착 술식이 보철 치료를 받은 치아상에서도 적절한 결합 강도를 갖으면서 임상적으로 유용하게 사용될 수 있는지를 평가하고, 불산과 포세린 전처리제의 사용 여부에 따른 결합 강도와 접착 파절 양상의 차이에 대해 알아보고자 시행하였다. 사람의 상하악 소구치 치관 20개를 대조군으로, 소구치의 협면을 복제한 포세린 치관 80개를 실험군으로 나눈 후, 대조군은 37% 인산으로 산부식한 후 Transbond $XT^{(R)}$를 이용하여 금속 브라켓을 접착하였고, 실험군들은 모두 포세린 치관에 통상적으로 sandblasting 처리를 하되, 9.6% 불산으로 4분간 부식처리를 함께 한 군, 포세린 전처리제를 적용한 군, 마지막으로 sandblasting과 불산 그리고 포세린 전처리제를 모두 적용한 군으로 20개씩 나눈 후 금속 브라켓을 접착하였다. 각 군간 전단 결합 강도와 접착 파절 양상을 비교하여 관찰한 결과, 포세린 치관에 금속 브라켓을 접착할 시, 기존의 비심미적인 밴드를 사용하지 않더라도 sandblasting과 불산 그리고 포세린 전처리제를 이용한 직접 부착 술식으로 임상적으로 유용하게 사용될 수 있음을 알 수 있었다.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.869-902
• /
• 1996

Flexion of a metal/ceramic fixed partial denture(EPD) frameworks under function can cause fracture of porcelain or deterioration of the cement seal. This study evaluated the flexion characteristics of three-unit mandibular FPD frameworks, repacing the second pre-molar under compressive load(200g, 400g). Testing was accompished with real-time holographic interferometry, using 6 porcelain fused-to metal frameworks. Tested alloys were non-precious alloy(Heracles, Holland), semi-precious alloy(Degudent U, Germany) and precious alloy(Degudent H, Germany). Changes of the fringe patterns according to the heat treatment(porcelain firing cycle), various loads(200g, 400g), occlusal forms(occlusal porcelain veneering, facial porcelain veneering), various alloys and post-soldering units were compared. Dental study model(Nissan dental products, Inc. D51DP-500A, Japan) and six 3-unit metal/ceramic fixed partial denture frameworks were used as experimental materials. 36 holograms were taken on fixed dental study model by using the 10mW He-Ne laser and real-time holographic interferometry. On the basis of this study, the following conclusions can be drawn : 1. In the frameworks for facial porcelain veneering, the semi-precious alloy framework was least deformed and precious alloy framework, non-precious alloy framework orderly before heat treatment, and the deformation was not shown great difference among three alloys after heat treatment and post-soldering. 2. In the frameworks for occlusal porcelain veneering, the precious alloy framework was greatest deformed and the deformation was not difference between semi-precious alloy framework and non-precious alloy framework before, after heat treatment, and the deformation was not shown great difference among three alloys after post soldering. 3. In the non-precious alloy frameworks for facial porcelain veneering and occlusal porcelain veneering, the deformation was greatly decreased after heat treatment and conversely increased after post-soldering. 4. In the semi-precious alloy framework for facial porcelain veneering, the deformation was not detectable after heat treatment and increased after post-solder. And in the frame-work for occlusal porcelain veneering, the deformation was slightly decreased after heat treatment and increased after post-soldering. 5. In the precious alloy framework for facial porcelain veneering, the deformation was greatly decreased after heat treatment and increased after post-soldering, And in the framework for occlusal porcelain veneering, the deformation was greatly decreased after heat treatment and decreased after post-soldering.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
• /
• pp.104-107
• /
• 2003

The ageing cause in many porcelain suspension insulators which occur on transmission and distribution line with dead-end stings is mechanical stress in interface between porcelain and cement materials. It is known that the principal mechanical stress which give electrical failure is the results of the displacement is due to cement growth. We studied an analysing method to find out a deformation of brittle porcelain with a thermal expansion of cement for suspension insulator. These simulation analysis and experimental results show that cement volume growths affect severely to be mechanical failure ageing. These simulation analysis and experimental results show that axial loading affects of Porcelain insulators severely to be mechanical failure ageing.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.157-162
• /
• 2006

Pressable ceramics have many applications in the field of dental industry because of their excellent esthetic, compressive strength, chemical durability. Despite these attractive characteristics, they have not been widely used since they are very brittle and extremly sensitive to porcelain. In this study, the fabrication of pressable dental porcelain ($SiO_2-Al_2O_3-K_2O-Na_2O$) as a function of contents of $Al_2O_3,\;BaO\;and\;ZrO_2$ were investigated. And then compressive strength, Vickers hardness, density and thermal expansion coefficient (TEC) tests have been carried out to evaluate properties of pressable dental porcelain fabricated. The property of pressable dental porcelain fabricated by adding of 15%$Al_2O_3$ and 2%BaO contents was closely approximated to that of natural tooth.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.882-887
• /
• 2004

The new magnetic porcelain materials have been studied by mixing magnetic St-ferrite powders with traditional porcelain materials before forming process. For the maintenance of magnetic characteristics after glaze firing process, the Sr-ferrite grains with the size of 1∼2 ${\mu}{\textrm}{m}$ were agglomerated as the isotropic granules with the size of 0.5∼2 mm. The high characteristics of magnetic porcelain materials were achieved at the following conditions; isotropic Sr-ferrite granules of 30 wt%, granule size of 1.4∼2 mm, and glaze firing temperature of $1250^{\circ}C$ in air The magnetic porcelain materials indicated the high magnetic properties, such as the remanent flux density of 240 G, the intrinsic coercivity of 3910 Oe, and the surface flux density of 178 G. The extraction properties of the magnetic tea cups were high compared to that of the traditional tea cups.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.600-604
• /
• 2008

Although titanium-ceramic systems have gained substantial interests in dental prosthetic field, bonding problem between porcelain and titanium has not been solved. Main obstacle in titanium-porcelain bonding is excessive oxidation of titanium during porcelain firing. The effects of several coating materials on the bonding strength of titanium-porcelain system were investigated in this study. RF sputtering and electroplating of platinum significantly increased the bonding strength of porcelain-titanium specimen. However, coatings of Ni-Au, Ir, and ceramics(zirconia and hydroxyapatite) did not showed a significant effect on bonding strength. Platinum might be a promising material for the protective layer of excessive oxidation of titanium during porcelain firing, resulting in increase in the bonding strength.

• 대한심미치과학회지
• /
• 제10권2호
• /
• pp.15-20
• /
• 2001

The spaced dentition is a common clinical finding. The careful analysis of clinically spaced dentition is a necessity for effective treatment planning. Spaced dentition often exists in the presence of intact teeth. Therefore, special care should be taken in order to obtain the most successful esthetic effect and to prevent overtreatment as well. The aesthetic restorative dental treatment using the porcelain laminate veneers is getting more popular than the complex orthodontic treatment, and prosthetic solutions that require sacrifice of sound tooth structure. The physical strength of porcelain laminate veneers is not as good as porcelain fused metal crowns, and more researches are needed in the field of bonding between composite cement and porcelain laminate veneer. However, the esthetic results from this unprepared porcelain laminate veneers were satisfactory with Authentic (Ceramay, Germany) pressable ceramic technique and resin cement (Rely X Veneer, 3M). This article deals with 2 cases of unprepared porcelain laminate veneers on anterior teeth.