• The Journal of Advanced Prosthodontics
• /
• 제15권3호
• /
• pp.145-154
• /
• 2023

PURPOSE. The objective of this study was to investigate how internal structures influence the overall and marginal accuracy of full arch preparations fabricated through additive manufacturing in different printing systems. MATERIALS AND METHODS. A full-arch preparation digital model was set up with three internal designs, including solid, hollow, and grid. These were printed using three different resin printers with nine models in each group. After scanning, each data was imported into the 3D data processing software together with the master cast, aligned and trimmed, and then put into the 3D data analysis software again to compare the overall and marginal deviation whose results are expressed using root mean square values and color maps. To evaluate the trueness of the resin model, the test data and reference data were compared, and the precision was evaluated by comparing the test data sets. Color maps were observed for qualitative analysis. Data were statistically analyzed by one-way analysis of variance and Bonferroni method was used for post hoc comparison (α = .05). RESULTS. The influence of different internal structures on the accuracy of 3D printed resin models varied significantly (P < .05). Solid and grid models showed better accuracy, while the hollow model exhibited poor accuracy. The color maps show that the resin models have a tendency to shrink inwards. CONCLUSION. The internal structure design influences the accuracy of the 3D printing model, and the effect varies in different printing systems. Irrespective of the kind of printing system, the printing accuracy of hollow model was observed to be worse than those of solid and grid models.

• Archives of Reconstructive Microsurgery
• /
• 제24권2호
• /
• pp.79-81
• /
• 2015

Rheumatoid arthritis is a long lasting autoimmune disorder that primarily affects joints, and patients with rheumatoid arthritis are predisposed to development of chronic skin ulcers. In addition, skin ulcers with rheumatoid arthritis tend to persist despite treatment because of sustained inflammation and poor healing capacity. Treatment of skin ulcers involves medications, wound coating agents, and surgical procedures including skin grafting, however, wound dressing or skin grafts are generally excluded because of excessive cost and time and poor intake rate. The dorsal metacarpal artery perforator (DMAP) flap, a vascular island flap for coverage of soft tissue defects on the fingers, provides promising results including matched quality and color. We experienced a case of DMAP flap for reconstruction of a rheumatoid ulcer, and a DMAP flap may be considered as a good faithful option for treatment of patients with rheumatoid ulcer.

• 한국실내디자인학회논문집
• /
• 제19권5호
• /
• pp.190-197
• /
• 2010

This is a study about public-regeneration-architecture design of the 3rd world damaged by the development of capital society of the 20th century and from the perspective of economically poor, anti-capitalist development from non-profit design organization. Active among such non-profit design organizations, the sustainable design characteristics of public-regeneration-architecture of the Architecture for Humanity will be discussed. I help it so as a continuous possibility design to have been given to public-regeneration-architecture of the Architecture for Humanity is small, and I establish a construction space at a few costs to people in a situation to be environmentally interior economic, to be cultural, and I am large, and to be able to generate profitable construction by environment at activation of a local community and worldwide dimensions. I look through a sustainable design way of this study classifies it to cultural sustainability that ecology-cultural approach in the environmental sustainability result ecology - central approach, and how I was applied to materials of construction, color, a pattern, a construction method, space configuration etc. There is the meaning to try to analyze a characteristic of a sustainable design to have appeared to public-regeneration-architecture of the Architecture for Humanity which I make a symbiosis, and you can live on it how in the present cities that city poor floor will add to.

• Journal of Astronomy and Space Sciences
• /
• 제34권2호
• /
• pp.83-97
• /
• 2017

We present extra-tidal features of spatial configuration of stars around three metal-poor globular clusters (NGC 6266, NGC 6273, NGC 6681) located in the Galactic bulge. The wide-field photometric data were obtained in BVI bands with the MOSAIC II camera at CTIO 4 m Blanco telescope. The derived color-magnitude diagrams (CMDs) contain stars in a total $71^{\prime}{\times}71^{\prime}$ area including a cluster and its surrounding field outside of the tidal radius of the cluster. Applying statistical filtering technique, we minimized the field star contaminations on the obtained cluster CMDs and extracted the cluster members. On the spatial stellar density maps around the target clusters, we found overdensity features beyond the tidal radii of the clusters. We also found that the radial density profiles of the clusters show departures from the best-fit King model for their outer regions which support the overdensity patterns.

• 천문학회보
• /
• 제35권2호
• /
• pp.82.1-82.1
• /
• 2010

We have investigated the spatial configuration of stars within the tidal radius of metal poor globular cluster NGC 6626 in the bulge direction. Data were obtained in near-IR J,H,Ks bands with wide-field ($20'\times20'$) detector, WIRCam at CFHT. To trace the stellar density around target cluster, we sorted cluster's member stars by using a mask filtering algorithm and weighting the stars on the color-magnitude diagram. From the weighted surface density map, we found that the stellar spatial distributions within the tidal radius appear asymmetric and distorted features. Especially, we found that more prominent over-density features are extending toward the direction of Galactic plane rather than toward the directions of the Galactic center and its orbital motion. This orientation of the stellar density distribution can be interpreted with result of disk-shock effect of the Galaxy that the cluster had been experienced. Indeed, this over-density feature are well represented in the radial surface density profile for different angular sections. As one of the metal poor globular clusters with extended horizontal branch (EHB) in the bulge direction, NGC 6626 is kinematically decoupled from the normal clusters and known to have disk motion of peculiar motion. Thus, our result will be able to add further constraints to understand the origin of this cluster and the formation of bulge region in early universe.

• 아시안잔디학회지
• /
• 제9권4호
• /
• pp.293-316
• /
• 1995

Nitrogen fertilization and cutting practice were studied on turfgrasses and cover plants to investigate the possibility of maintaining green color during the growing season. Research also involved the effect of the nitrogen on a few morphological characteristics of leaf performance elements which might give an information to coloration and life-span of turf leaves. Treatments in the first experiment undertaken on pot included one N level: 350kgN /ha applied as compound fertilizer in split applications of one-half in mid-May and the rest both in late June and August, and four spring-summer cuts: late May, late June, late July and late August. The soil filled in pot a moderately well-drained sandy loam. In the second experiment(field observation) leaf length and width, inflorescence and flowering, and color performance were also investigated. With nitrogen fertilizer applied on turfs, desirable turf color was maintained during a period of poor coloration in specific seasons such as mid-summer for cool season grasses and late fall for warm season grasses comparing to the non-treatment. However, this was not stimulated by cutting treatment to nitrogen status existed. Cutting effect on coloration was more remarkable in both Korean lawngrass and Manilagrass than in cool season turfgrasses such as Italian rye-grass, perennial ryegrass and tall fescue. Especially down-slide of leaf color in cool season turfgrasses could he detected in mid-summer /early fall season ranging up to mid-September. In early November as well as mid-September, Italian ryegrass, perennial ryegrass and tall fes-cue retained a high level of green color as followed by nitrogen application and cutting treatment, and little detectable variation of leaf color notation between cool season turfgrasses was obtained. However, Korean la'vngrass and Manilagrass failed to retain the green color until early November. Color notations in cool season turfgrasses investigated early November on the final date of the experiment ranged from 5 GY 3/1 to 4/8 in 'Ramultra' Italian ryegrass, 'Reveile' perennial ryegrass and 'Arid' tall fescue, but those in Zoysiagrasses were 7.5 YR 4/8 in Korean lawngrass and 2.5 y 5 /6 in Manilagrass. Life-span of leaves was shorter in Italian ryegrass, perennial ryegrass and tall fescue than in beth Korean lawngrass and Manilagrass with and without nitrogen application. In general, leaves appeared in early May had a long life-span than those appeared in late April or mid-June. Nitrogen application significantly prolonged the green color retaining period in perennial ryegrass, Italian ryegrass, Korean lawngrass and Manilagrass, and this was contrasted with the fact that there was no prolonged life-span of leaves emerging in early May and mid-June in tall fescue. SPAD reading values in 48 turfs and cover plants investigated in the field trial were increasing until late June and again decreasing till September. Increasing trends of reading value could be observed in the middle of October in most of grasses. On the other hand, clovers and reed canarygrasses did not restore their color values even in October. Color differences between inter-varieties, and inter-species occurred during the growing season under the field condition implicated that selection of species and /or cultivars for mixture should be taken into consideration. In Munsell color notation investigated in the final date in the middle of November, 32 cultivars belonged under the category of 5 GY and 10 cultivars under the category of 7.5 GY. This was implying that most of cool season turfs and cover plants grown in the center zone of Korean Peninsula which are able to utilize for landscape use can bear their reasonable green color by early or mid-November when properly managed. The applicable possibilities of SPAD readings and Munsell color notation to determine the color status of turfgrasses and cover plants used in this study were discussed.

• 천문학회보
• /
• 제38권2호
• /
• pp.76-76
• /
• 2013

The current hierarchical model of galaxy formation predicts that galaxy halos contain merger relics in the form of long stellar streams. In order to find stellar substructures in galaxy, we focused our investigation on the stellar spatial density around globular clusters and on the quantitative properties of the evolved sequences in the color-magnitude diagrams (CMDs). First, we investigated the spatial configuration of stars around five metal-poor globular clusters in halo region (M15, M30, M53, NGC 5053, and NGC 5466) and one metal-poor globular cluster in bulge region (NGC 6626). Our findings indicate that all of these globular clusters show strong evidence of extratidal features in the form of extended tidal tails around the clusters. The orientations of the extratidal features show the signatures of tidal tails tracing the clusters' orbits and the effects of dynamical interactions with the galaxy. These features were also confirmed by the radial surface density profiles and azimuthal number density profiles. Our results suggest that these six globular clusters are potentially associated with the satellite galaxies merged into the Milky Way. Second, we derived the morphological parameters of the red giant branch (RGB) from the near-infrared CMDs of 12 metal-poor globular clusters in the Galactic bulge. The photometric RGB shape indices such as colors at fixed magnitudes, magnitudes at fixed colors, and the RGB slope were measured for each cluster. The magnitudes of the RGB bump and tip were also estimated. The derived RGB parameters were used to examine the overall behavior of the RGB morphology as a function of cluster metallicity. The behavior of the RGB shape parameters was also compared with the previous observational calibration relation and theoretical predictions of the Yonsei-Yale isochrones. Our results of studies for stellar spatial distribution around globular clusters and the morphological properties of RGB stars in globular clusters could add further observational evidence of merging scenario of galaxy formation.

• 천문학회지
• /
• 제46권6호
• /
• pp.203-224
• /
• 2013

Wide-field $JHK_s$ images obtained with the SIRIUS near-infrared camera of the IRSF 1.4m telescope are used to examine the tidal structures of the spatial stellar configuration around six metal-poor ([Fe/H]< -1.0) globular clusters located within 3 kpc from the Galactic center. The radial surface density profiles are obtained from the surface photometry of the cluster images and the star counting for the photometric data. For the star counting, candidates of cluster member stars are selected with an filtering algorithm in color-magnitude diagrams. We find that the six target clusters show tidal overdensity features in the radial surface density profiles. There is a break inside the tidal radius for each cluster, and the profile in the outer overdensity region is characterized by a power law. Two-dimensional density maps of all the clusters show distorted asymmetric stellar configurations in the outer region. In five out of the six target clusters, the overdensity features are likely to be associated with the effects of the Galaxy dynamical interaction and the cluster space motions. The observed tidal configurations of stars suggest that several metal-poor clusters in the Galactic bulge are possibly surviving remnants of mergers to build the old stellar system of the Galactic bulge.

• 원예과학기술지
• /
• 제31권3호
• /
• pp.259-268
• /
• 2013

다단 구조, USGA 구조 및 약식 구조에서 자란 난지형 및 한지형 잔디의 연중 잔디색상 품질, 동절기 색상 및 이른 봄 녹화 특성을 파악하고자 본 연구를 수행하였다. 다단 구조, USGA 구조 및 약식 구조의 전체 깊이는 각각 60cm, 45cm 및 30cm 이었다. 공시 초종은 들잔디 세 품종과 켄터키 블루그래스, 퍼레니얼 라이그래스 및 톨 페스큐 조합종 및 이들 한지형 혼합구가 각각 세 종류이었다. 연구결과 잔디지반 및 초종별로 잔디색상 품질, 동절기 색상 및 이른 봄 녹화에 대해 유의한 차이가 나타났다. 잔디색상은 지반 및 초종에 따라 계절적인 차이가 나타났는데 다단 구조와 USGA 구조에서 자란 잔디의 색상이 약식 구조에 비해 지속적으로 우수하였다. 지반에 관계없이 난지형 및 한지형 잔디 모두 겨울에 비해 봄부터 가을까지 색상이 양호하였으며 초종 간 차이는 특히 계절적으로 12월 초에서 겨울 휴면기를 벗어나 녹화되기 시작하는 이른 봄 사이 크게 나타났다. 공시 초종 간 잔디색상은 다단 구조, USGA 구조 및 약식 구조에서 한지형 잔디가 난지형 들잔디보다 훨씬 양호하였다. 한지형 잔디의 색상 품질은 켄터키 블루그래스 > 퍼레니얼 라이그래스 > 혼합구 > 톨 페스큐 순서로 나타났다. 그리고 난지형 들잔디의 경우 '야지' 및 '제니스'의 잔디색상이 '중지'에 비해 양호하였다. 동절기 잔디색상의 지반 간 우열관계는 USGA 구조 > 다단 구조 > 약식 구조 순서로 나타났으며, 초종 간 차이는 난지형 '야지', '중지' 및 '제니스'의 경우 모두 완전히 갈색으로 나타났고, 반면 한지형 잔디는 모든 지반에서 녹색을 유지하였다. 이 중 퍼레니얼 라이그래스의 색상이 가장 양호하였으며, 톨 페스큐는 탈색이 빨리 진행되어 녹색이 가장 옅게 나타났고, 켄터키 블루그래스는 퍼레니얼 라이그래스와 톨 페스큐 사이의 색상을 나타내었다. 이른 봄 잔디녹화 속도는 난지형 및 한지형 잔디 모두 다단 구조에서 생육 시 가장 빨랐고, 반면 약식 구조에서 잔디녹화가 초종에 관계없이 가장 느리게 나타났다. 잔디지반에 관계없이 모두 난지형에 비해 한지형 잔디의 이른 봄 녹화속도가 훨씬 빨랐다. 한지형 잔디 중에서는 톨 페스큐의 색상 균일도가 가장 양호하였으며, 퍼레니얼 라이그래스의 경우 녹화 속도는 빨랐지만 색상의 균일도가 떨어졌다. 그리고 켄터키 블루그래스의 녹화 속도는 가장 느리게 나타났는데, 이는 근계 발달이 낮게 분포하기 때문이라 판단되었다. 종합적으로 잔디지반에 따라 색상 품질 차이가 크게 나타났고, 또한 동일 지반에서도 초종별로 그 차이가 크기 때문에 잔디 초종 및 지반 선정 시 주의 깊게 결정하는 것이 필요하다. 우수한 잔디 색상품질, 동절기 색상 및 이른 봄 녹화를 위해서는 약식 구조 대신 다층 구조(다단 구조 및 USGA 구조)가 바람직하다. 또한 혼합구의 경우 켄터키 블루그래스, 퍼레니얼 라이그래스 및 톨 페스큐 혼합 정도에 따라 연중 잔디색상품질, 동절기 색상 및 이른 봄 녹화가 다르게 나타났기 때문에 정원, 공원, 경기장 및 골프장 등 잔디밭 조성 시 컨셉에 의한 초종 선정 및 혼합율을 결정하는 것이 필요하다.

• 조명전기설비학회논문지
• /
• 제22권2호
• /
• pp.1-9
• /
• 2008

빛은 인간이 주거공간에서 삶을 영위함과 더불어 창조활동을 하는데 있어서 가장 중요한 요소이다. 특히 식탁조명설계는 인간에게 신체적 심리적으로 가장 중요한 요소로 작용함에도 불구하고 현재까지 미적인 면만을 강조하였다. 그 이유는 조명디자이너가 KS기준조도에 맞추어 조명설계를 하고 있는데, KS기준조도는 한국의 사회 문화적 특성을 고려하지 않은 일본의 기준조도(JIS)를 기본으로 만들어진 것이므로 적절치 못한 조도레벨인 것이다. 따라서 한국의 특성이 반영된 기준조도 설정이 매우 시급한 상황이다. 본 연구에서는 현재 공동주택에 적용되고 있는 조명설계 현황을 조사하고 분석하여 한국의 식문화에 적절한 조도레벨, 색온도, 조명디자인을 제안하여 조명설계시 가이드라인으로 활용하고자 한다.