• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.118-121
• /
• 2002

Polyvinylidene di-fluoride (PVDF) film sensor appeared to be practically useful for the structural health monitoring of composite materials and structures. PVDF film sensors were either attached to or embedded in the graphite/epoxy composite (CFRP) samples to detect the fatigue damage at the bondline of single-lap joints or the tensile failure of unidirectional laminates. PVDF sensors were sensitive enough to detect and determine the crack front in linear location since composites usually produce very energetic acoustic emission (AE). PVDF sensors are extremely cost-effective, as flexible as other plastic films, in low profile as thin as a few tens of microns, and have relatively wide-band response, all of which characteristics are readily utilized for the structural health monitoring of composite structures. Signals due to fatigue damage showed a characteristics of mode II (shear) type failure whereas those from fiber breakage at DEN notches showed that of mode I (tensile) type fracture.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.158-162
• /
• 2003

The PVDF(polyvinylidene fluoride) film sensor as one of smart sensors has good characteristics to detect the impact damages of composite structures. The capabilities of the PVDF film sensor for evaluating impact behaviors and damages of Gr/Ep laminates subjected to low-velocity impact were examined. From sensor signals, the specific wave-forms implying the damage were detected. The wavelet transform(WT) and Short Time Fourier Transform(STFT) were used to decompose the piezoelectric sensor signals in this study. The impact behaviors of Gr/Ep laminates were simulated and the impact forces were reconstructed using the sensor signals. Finally, the impact damages were predicted by finite element analysis with the reconstructed forces. For experimental verification, a series of low-velocity impact tests from low energy to damage-induced energy were carried-out. The extent of damage in each case was examined by means of ultrasonic C-scan and the measured damage areas were agreed well with the predicted areas by the F.E.A.

• 한국멀티미디어학회논문지
• /
• 제7권6호
• /
• pp.767-780
• /
• 2004

Interaction requires dynamic relationship between objects. In ubiquitous computing environment, interaction between human and the environment is implied. Tactile interaction has so far been less addressed, while tactile sensation should be an important topic in the field of multimedia study. This paper describes development of a novel PVDF (Polyvinylidene Fluoride) dynamic tactile sensor and associated experiments. PVDF dynamic tactile sensors detect touch events applied to the sensor skin by low frequency components of the signal. Rubber skin-covered sensing material was mounted on the bones. Robust performance with low noise was figured out in our robotic experiment. Whereas most conventional sensors are interested in measurement, our dynamic tactile sensor is sensitive to change of state, which could be a key for economic understanding of happenings in the dynamic world. We note that dynamic sensing uses motion as a part of sensing modality We suggest that dynamic sensing be understood in technological terms in the perspective of interactive media and ubiquitous computing.

• 폴리머
• /
• 제37권1호
• /
• pp.74-79
• /
• 2013

Polyvinylidene fluoride(PVDF)와 다양한 조성을 갖는 P(VDF-co-HFP)를 개시제 diisopropyl peroxidicarbonate(DIPPDC)와 용매 R-113을 사용하는 용액중합방법을 통해 성공적으로 합성하였다. 공중합의 VDF와 hexafluoropropylene(HFP)의 반응성 비는 $r_{VDF}=2.06{\pm}0.03$과 $r_{HFP}{\approx}0$으로 확인되었다. 이결과는 HFP의 자가 사슬성장이 거의 일어나지 않는다는 것을 의미한다. 고분자의 중량평균 분자량 및 분포도는 HFP 함량이 증가할수록 점차적으로 감소하는 경향성을 보였다. 고분자의 녹는점은 HFP 함량이 증가할수록 결정화를 방해하기 때문에 선형적으로 낮아지는 경향성을 나타내었다. 더욱이 높은 HFP 함량에서는 녹는점이 발견되지 않았다. 고분자의 유리전이 온도의 경우, HFP 함량이 증가할수록 고분자사슬의 유동성을 감소시켜 점차적으로 상승하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1792-1794
• /
• 1999

PVDF(Polyvinylidene Fluoride) thin films were prepared by using a physical vapor deposition system. Thin films were studied by X-ray diffraction (XRD), differential scanning calorimeter (DSC). The melting point$(T_m)$ of PVDF thin films increases with increasing substrate temperature. It is found that the degree of crystallinity of PVDF thin films increases from 49.8 to 67% with increasing substrate temperature from 30 to $80^{\circ}C$.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.481-484
• /
• 2002

nylon 6의 단점인 저온에서의 연성 및 내충격성 저하를 개선하는 동시에 nylon 6의 내후성도 개선시키는 방법의 하나로 유리전이온도가 매우 낮고, 내가수분해성, 내후성 및 연성(ductile property)이 뛰어난 불소함유 고분자계의 한 종류인 PVDF (polyvinylidene fluoride)를 nylon 6에 용융블렌드 하는 방법이 제안되었다. [1-5] 그런데 용융상태에서 두 고분자는 부분 혼화성만을 보이고, nylon 6과 PVDF는 모두 결정성 고분자이기 때문에 성형 후 냉각하는 동안 두 고분자의 결정화에 기인한 결정화유도 상분리가 일어나게 된다. (중략)

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.451-453
• /
• 2010

PVDF(polyvinylidene fluoride) 필름은 압전특성을 가지며 음파에너지를 발생시키는 유연성 고분자필름이다. 이 연구에서는 기존 원통형 연직 배수재에 PVDF 필름의 음파에너지를 적용하여 점토의 미세입자가 배수재의 성능을 저하시키는 막힘현상(clogging)을 방지함으로써 배수재의 성능을 향상시키고, 압밀을 촉진시키고자 하였다.

• Smart Structures and Systems
• /
• 제4권3호
• /
• pp.291-304
• /
• 2008

Piezoelectric materials have been widely used in ultrasonic nondestructive testing (NDT). PZT ceramics can be used to receive and generate surface acoustic waves. It is a common application to attach PZT transducers to the surface of structures for detecting cracks in nondestructive testing. However, not until recently have piezoelectric polymers attracted more and more attention to be the material for interdigitated (IDT) surface and guided-wave transducers. In this paper, an interdigitated gold-on-polyvinylidene fluoride (PVDF) transducer for actuating and sensing Lamb waves has been introduced. A specific etching technology is employed for making the surface electrodes into a certain finger pattern, the spacings of which yield different single mode responses of Lamb waves. Experiments have been performed on steel and carbon fiber composite plates. Results from PVDF IDT sensors have been compared with those from PZT transducers for verification.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.1-7
• /
• 2018

The principal objective of this study is to investigate the effect of Polyethylene Glycol (PEG) crosslinking in Polyvinylidene Fluoride (PVDF) in immobilization of Fe and bimetallic Fe/Cu and Cu/Fe zero valent particles on the membrane and its efficiency on removal of nitrate in wastewater. PVDF/PEG polymer solution of three weight compositions was prepared to manipulate the viscosity of the polymer. PEG crosslinking was indirectly controlled by the viscosity of the polymer solution. In this study, PEG was used as a modifier of PVDF membrane as well as a cross-linker for the immobilization of the zero valent particles. The result demonstrates improvement in immobilization of metallic particles with the increase in crosslinking of PEG. Nitrate removal efficiency increases too.

• 비파괴검사학회지
• /
• 제35권2호
• /
• pp.112-119
• /
• 2015

고해상도 분자 영상이 가능한 광음향 현미경의 공간해상도는 초음파 변환기에 의해 결정되기 때문에 높은 동작 주파수, 광대역, 높은 신호 수신 효율을 갖는 광음향 수신 변환기는 고성능 광음향 현미경에 필수적이다. Polyvinylidene fluoride (PVDF)는 이러한 광음향 수신 변환기 성능 확보가 가능한 압전소재이다. 그러나 PVDF는 낮은 음향 임피던스로 인해 사용되는 흡음층에 의해서 중심주파수 및 대역폭이 영향을 받게된다. 본 논문에서는 광음향 현미경에 적합한 PVDF 기반 고주파수 초음파 수신 변환기의 최적 흡음층 소재의 음향 임피던스가 최종 변환기 성능에 어떠한 영향을 주는지에 관한 연구를 수행하였다. 이를 위해 EPO-TEK 301, E-Solder 3022, RTV를 각각 흡음층 물질로 사용하여 고주파수 초음파 수신 변환기를 제작하고 그 음향 특성을 평가하였다. 제작된 변환기의 공간해상도를 평가하기 위해 $25{\mu}m$ 직경을 갖는 철심을 표적으로 사용하여 영상을 획득하였으며, 실험을 통해 얻은 펄스-에코 신호 크기 및 중심주파수, -6 dB 대역폭, 공간해상도 평가를 통해 PVDF의 음향 임피던스보다 약간 높은 음향 임피던스를 갖는 EPO-TEK 301이 가장 적합한 흡음층 물질임을 알 수 있었다.