• 펄프종이기술
• /
• 제30권4호
• /
• pp.28-34
• /
• 1998

Polyvinyl acetate emulsion has been widely used as adhesives for wood and paper, paint additives and binders for fiber, leather, and other materials because it is an excellent adhesive with many advantages including low in toxicity risks and manufacturing cost. It is expected the consumption of polyvinyl acetate emulsion as adhesives will increase in cigarette industry as well as in paperboard coating industry. Recently the operation speed of the cigarette tip wrapper increased so substantially that improvement of the emulsion properties is required including good wet tack development, narrow and controlled particle size distribution, low viscosity, etc. In this study the effects of such polymerization conditions as the type and amount of emulsifier, internal or external plasticizing, and emulsification methods on the viscosity and particle size of polyvinyl acetate emulsions were examined. Results showed that polyvinyl alcohol with a high degree of hydrolysis and low molecular weight and nonionic surfactants are superior to anionic surfactant in improving adhesion and emulsion stability. They also tend to produce emulsions with smaller particle size. External plasticization with dipropylene glycol dibenzoate was more effective in improving flexibility than internal plasticization with butyl acrylate. Monomer emulsification under high shear was more effective in decreasing the particle size.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.100-101
• /
• 2017

LEFC(Light Emotion Friendly Conceret) was developed in Korea with demands of esthentic requirements in line with the recent developmental trend of concrete technology. The LEFC is made by inserting transparent transparent rods, and this forms a heterogeneous structure in the concrete matrix causing the LEFC substrate to crack due low adhesion between the rod and the cement. In this study, as a way to strengthen the bonding to the rod inserted in the LEFC, high strength vinylon fibers of varying mixture ratios were applied and physical properties were tested accordingly. To study the effect of different spacing of the bars on the LEFC, physical property testing was conducted on respective specimens with two different diameters (5mm, 10mm) inserted in different intervals of spacing (10mm, 15mm, and 20mm).

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.156-162
• /
• 2011

To evaluate the bonding performance of reinforced glulam, the textile type of glass fiber and aramid fiber, and the sheet type of glass fiber reinforced plastic (GFRP) and carbon fiber reinforced plastic (CFRP) were used as reinforcements. The reinforced glulam was manufactured by inserting reinforcement between the outmost and middle lamination of 5ply glulam. The types of adhesives used in this study were polyvinyl acetate resins (MPU500H, and MPU600H), polyurethane resin and resorcinol resin. The block shear strengths of the textile type in glass fiber reinforced glulam using MPU500H and resorcinol resin were higher than 7.1 N/$mm^2$, and these glulams passed the wood failure requirement of Korean standards (KS). In case of the sheet types, GFRP reinforced glulams using MPU500H, polyurethane resin and resorcinol resin, and CFRP reinforced glulams using MPU500H and polyurethane resin passed the requirement of KS. The textile type of glass fiber reinforced glulam using resorcinol resin after water and boiling water soaking passed the delamination requirement of KS. The only GFRP reinforced glulam using MPU500H after water soaking passed the delamination requirement of KS. We conclude that the bonding properties of adhesive according to reinforcements are one of the prime factors to determine the bonding performance of the reinforced glulam.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권1호
• /
• pp.102-112
• /
• 2019

본 연구는 PVA(polyvinyl alcohol) 섬유와 VAE(vinyl acetate ethylene) 분말 폴리머를 사용한 시멘트복합체의 압축 휨강도 와 온도변화에 따른 충격파괴거동을 연구하였다. 충격시험은 $-35^{\circ}C$, $0^{\circ}C$ 및 $35^{\circ}C$의 선정된 온도조건에서 실시하였다. 본 실험에서는 시멘트 복합체와 일반 모르타르에 대한 충격파괴 에너지와 변위, 시간을 얻기 위해 낙하 충격시험기(Ceast 9350)를 사용하여 충격시험을 수행하였다. 강도시험결과, PVA 섬유와 VAE 분말 폴리머의 휨강도는 모두 증가하였다. PVA 섬유보강 시멘트복합체의 경우 재령 28일에서의 압축강도는 약간 감소하였으나, 휨강도는 일반 모르타르 강도보다 24.4% 증가하였다. 낙하 충격시험 결과, PVA 섬유보강 시멘트복합체 시편은 섬유의 가교역할로 인한 균열발생의 억제와 에너지 분산에 의한 미세균열이 발생하였으며, 충격에 의한 배면파괴와 관통에 대하여 억제되었다. 반면 VAE 분말 폴리머 시멘트복합체와 일반 모르타르의 시편은 대부분 큰 균열이나 관통파괴 되었다. 충격하중을 받는 시멘트복합체와 일반 모르타르의 시편은 대부분 국부적인 취성파괴거동을 보이며, PVA 섬유보강에 의한 휨성능 증진으로 인해 충격에 대한 저항성능이 크게 향상되었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3733-3737
• /
• 2013

Polyacrylonitrile (PAN)-based ultrafine fibers and carbon fibers were produced by wet-spinning, and the crystal sizes and thermal and mechanical properties of the fibers were investigated. Scanning electron microscopy revealed that the superfine fibrils in the surfaces of the PAN/polyvinyl acetate (PVA) blend fibers increased slightly with increasing PAN content before removal of the PVA. Differential scanning calorimetry indicated that the PAN and PVA in the blend fibers do not mix and, therefore, each maintains their inherent thermal characteristics. The crystal sizes of the blend fibers prepared by removing PVA with water increased at 5 wt % water. The extent of the reaction of the PAN carbon fibers, as calculated from the FT-IR spectra, is maximized at the stepwise temperature of $230^{\circ}C$, and the density increased significantly above this temperature. The carbon fibers had relatively good mechanical properties, as shown by their tensile strength and modulus values of 2396 MPa and 213 GPa, respectively.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.74-80
• /
• 2009

Electrospinning process is the useful and unique method to produce nanofibers from metal precursor and polymer solution by controlled viscosity. In this study, the NiZn ferrite nanofibers were prepared by electrospinning with a aqueous metal salts/polymer solution that contained polyvinyl pyrrolidone and Fe (III) chloride, Ni (II) acetate tetrahydrate and zinc acetate dihydrate in N,N-dimethylformamide. The applied electric field and spurting rate for spinning conditions were 10 kV, 2 ml/h, respectively. The obtained fibers were treated at $250^{\circ}C$ for 1 h to remove the polymer. Finally, the NiZn ferrite fibers were calcined at $600^{\circ}C$ for 3 h and annealed at $900{\sim}1200^{\circ}C$ in air. By tuning the viscosity of batch solution before electrospinning, we were able to control the microstructure of NiZn ferrite fiber in the range of $150{\sim}500\;nm$ at 770 cP. The primary particle size in $600^{\circ}C$ calcined ferrite fiber was about 10 nm. The properties of those NiZn ferrite fibers were determined from X-ray diffraction analysis, electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, thermal analysis, and magnetic measurement.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.364-371
• /
• 2009

본 연구에서는 체적비 0.7%, 2.1%의 탄소섬유강화플라스틱 강화 낙엽송 집성재 보를 제작하여 휨강도 성능을 평가하였다. 휨강도 시험 결과 복합집성재의 파괴형상은 인장응력부 최하층에서 1차 파괴가 일어났지만 탄소 섬유 보강층 상층부는 파괴되지 않았다. 인장응력부위에서 1차 파괴가 일어난 후에도 보강층 상층부는 강도를 유지하고 있어 계속 하중이 증가하면 보강층 상층부에서 2차 파괴가 일어났다. 탄소섬유강화플라스틱 복합집성재의 휨강도는 체적비 0.7%를 보강한 집성재의 경우 대조군 집성재(control 재)에 비해 1차 파괴시 휨강도는 28% 향상되었다. 보강층 상층까지 완전한 파괴가 일어났을 때의 휨강도는 55% 향상되었다. 탄소섬유강화플라스틱을 체적비의 2.1% 보강한 경우 대조군 집성재에 비해 휨강도가 77% 증가하였다. Romani가 제안한 파괴모드를 이용하여 산출된 탄소섬유강화플라스틱 복합집성재의 예측 중립축과 스트레인 게이지로 측정된 실측 중립축의 높이가 1.03으로 잘 일치하는 것을 확인할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.19-25
• /
• 2008

유리섬유강화플라스틱(GFRP : Glass fiber reinforced plastic) 보강 집성재를 제작한 후 유리섬유강화플라스틱의 체적비에 따른 휨강도 성능을 평가하였다. 집성재 제작에는 평균함수율 8%, 비중 0.54의 국산 낙엽송(Larix kaempferi Carr.) 제재판($2cm(h){\times}10cm(b){\times}360cm(l)$)을 7층으로 적층하여 집성재($10cm(b){\times}14cm(h){\times}180cm(l)$)를 제작하였다. 유리섬유강화플라스틱은 인장응력을 받는 하층의 최외각층과 윗층 사이에 두께 0.1 cm (체적비 0.7%)와 0.3 cm (체적비 2.1%)로 보강하였다. 유리섬유강화플라스틱을 체적비 0.7% 보강한 집성재의 경우 Control 집성재보다 휨강도가 12% 정도 증가하였으며 체적비 2.1%를 보강한 집성재의 경우 휨강도가 28% 정도 증가하였다. 또한, 유리섬유강화플라스틱 보강층이 파단의 진행을 억제하였으며 파괴되지 않은 부분은 약 90%의 휨강도를 유지하고 있었다. 접착성능 평가 결과 블록 전단 강도는 KS F3021의 합격기준 $7.1N/mm^2$를 만족하였으며 침지박리시험과 삶음박리시험 결과 박리율 5% 이하로 접착성능도 양호하였다.