• Elastomers and Composites
• /
• v.25 no.2
• /
• pp.133-143
• /
• 1990

• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.52-56
• /
• 2018

The present study examines the transformation of dynamic DSC data into the equivalent isothermal data for the formation kinetics of a polyurethane elastomer. The reaction of 2'-dichloro-4,4'-methylenedianiline (MOCA) with a PTMG/TDI-based isocyanate prepolymer was evaluated. DSC measurement was performed in the dynamic scanning mode with several different heating rates to obtain the reaction thermograms. Then, the data was transformed into the isothermal data through a procedure based on Ozawa analysis. The main feature of this procedure was the transformation of $({\alpha}-T)_{\beta}$ curves from dynamic DSC into $({\alpha}-t)_T$ curves using the isoconversional $(t-T)_{\alpha}$ diagram. Validity was discussed for the relationship between the dynamic DSC data and the transformed isothermal results.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.256-262
• /
• 2013

We synthesized thermoplastic polyurethane elastomer (TPU) with different contents of sulfuric acid group, and characterized their physical properties such as mechanical, thermal and grip properties. And the results were compared with carboxylic acid-introduced TPU. Wet slip, tensile strength and abrasion properties were increased by the introduction of acid group. Mechanical properties increased with increasing the acid content up to 0.3 wt%. However, wet slip was continually increased as the acid content increased due to increase of hydrophilicity of TPU.

• Journal of Adhesion and Interface
• /
• v.16 no.2
• /
• pp.63-68
• /
• 2015

We synthesized thermoplastic polyurethane elastomer containing carboxylic acid group and TPV (thermoplastic vulcanizate). We measured the mechanical, grip, debris, contact angle and adhesion properties according to introducing acid group in elastomer structure. Mechanical and wet slip properties were improved because of the hydrogen bonding by introduction of acid group. Also adhesion strength was increased as increasing of surface polarity by carboxylic acid group. The debris property of TPV made from TPU containing carboxylic acid group was improved.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.191-198
• /
• 2014

We synthesized thermoplastic polyurethane elastomer(TPU) with acid group and nano zinc oxide, and characterized their mechanical properties, thermal properties, contact angle and grip property. The effects of the zinc oxide content and size on the physical property of TPU were investigated. When the nano zinc oxide was introduced in TPU with acid group, it had excellent mechanical properties and grip by formation of hydrogen and ionic bonding. The wet slip of TPU with zinc oxide was increased continuously as ionization rate increased due to increase of hydrophilicity and ionic interaction, and mechanical properties were increased with increasing ionization rate up to 50%.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.8
• /
• pp.847-853
• /
• 2013

Micro-dimples on sliding surfaces have been investigated to reduce the frictional forces on metal bearing surfaces; however, for an elastomer, such as thermoplastic polyurethane (TPU), this has not been studied. The material properties of an elastomer are affected by temperature, and this can shorten the life of the elastomer. In this paper, micro-dimples were applied on the surface of an elastomer in order to reduce the frictional heating, which was experimentally investigated using pin-on-disk apparatus while the surface temperature was measured. To obtain optimal design parameters, the design of the experiment was applied, and the shape of the section, size, depth and density of micro-dimples were selected as the design parameters. The results show that the size of the dimple is the most important design parameter.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.68-74
• /
• 2013

We synthesized polyurethane elastomer containing acid groups. We measured the adhesion, grip, tensile strength and mechanical properties. Casting polyurethane elastomers were prepared with the contents of acid. The adhesive strength and the wet slip were increased. Also, the tensile strength and abrasion properties were increased. We measured the properties with different acid contents. Increasing the acid content, the mechanical properties were increased. But the mechanical properties were decreased above 0.20 wt% of acid content. The wet slip was increased and the contact angle was decreased as the acid content increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.1074-1087
• /
• 2022

This study reports an optimization of a 3D printed wrist brace (WB) for various tilting angles (0°, 45°, 90°) of the re-entrant (RE) pattern and thickness (2 mm, 4 mm) using thermoplastic polyurethane (TPU) filaments and thermoplastic elastomer (TPE) filaments. The actual printing time, weight, Poisson's ratio, and tensile property of the manufactured samples were analyzed. The results confirmed that the actual printing time and weight increased with increasing thickness, regardless of the filament type. All tilting angles of the WB showed a negative Poisson's ratio (NPR), the largest of which appeared at 90°. The results of the tensile property analysis showed that a 90° tilting angle also had the largest value of elongation and stress. From these results, we conclude that the most suitable wrist brace is one in which the actual printing time is low, the weight is minimized to a thickness of 2 mm, and the tilting angle of the RE pattern is 90° for good shock absorption. The choice of filaments may be decided upon according to the user's preference, since the TPU is stiff and the TPE is elastic.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2003.04a
• /
• pp.162-166
• /
• 2003

탄성체는 크게 열경화성 탄성체(thermosetting elastomer)와 열가소성 탄성체(thermoplastic elastomer)로 분류할 수 있다. 이러한 탄성체들 가운데 대표적인 소재로 반복하여 재사용이 가능하여 경제적인 소재이며 환경친화적인 소재인 열가소성 폴리우레탄에 대한 관심이 높아져 왔고 그에 따른 연구도 활발히 진행되어 왔다. 이러한 열가소성 폴리우레탄(TPU)은 가공의 용이성과 양호한 물리적 ㆍ화학적 성질 때문에 섬유용 소재에서 엔지니어링 플라스틱에 이르기까지 광범위한 산업용 소재로의 개발을 통하여 사용량이 지속적으로 증가를 보이고 있다. (중략)

• Elastomers and Composites
• /
• v.43 no.1
• /
• pp.18-24
• /
• 2008

An oligomeric diol was utilized as a modifier for the reaction rate and mechanical properties of a RT-castable polyurethane elastomer. Both the reaction rate and the tensile strength of the blend samples, in which the modifier and the base resins were mixed with one-shot method, showed an exponential decrease as the increase of modifier concentration. Thermal analysis method of Kissinger was also effectively applied in the present study, showing good linearity in the plot of ln $(q/T^2_p)$ vs. $(1/T_p)$ and activation energy $E_a$ of 44.80 kJ/mol, which is similar to the general castable polyurethane. In the mechanical properties, remarkable decrease of strength was found by the addition of modifier concentration range up to about 20 phr, while characteristic elongation property of the elastomer, high elongation at lower strength, was observed over 20 phr of the modifier. Exponential decrease of the break strength of the blend sample exhibited that the mechanical properties of the blend might be considerably sensitive to the modifier concentration.