• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.13-18
• /
• 2015

The fabrication method used for mineral hydrate is similar to that of ALC (autoclaved lightweight concrete), but the fabrication of normal slurry with a considerable amount of a foaming agent is difficult due to material separation and collapse of the slurry. Therefore, the development of fabrication methods for normal slurry is necessary. The final product, mineral hydrate insulation, has excellent thermal properties but poor strength characteristic given the many pores. In this study, in order to fabricate normal slurry, the viscosity and foaming time of the slurry were controlled. The mixing ratio of the starting material and the polypropylene fiber was controlled to improve the strength. Mineral hydrate with polypropylene fiber showed a higher strength than that without this type of fiber. Specifically, the compressive strength of mineral hydrate with 2% polypropylene fiber added to it was more than 40% higher than that without the fiber.

• 한국세라믹학회지
• /
• 제32권5호
• /
• pp.559-566
• /
• 1995

Alumina powder was coated with stearic acid and then mixed with isotactic polypropylene, atactic polypropylene as binders at 15$0^{\circ}C$ for 2 hours. The mixture was then injection molded at various mold temperatures using injection molding machine to investigate the effect of the molding temperature and debinding parameters on the formation of the defects. The molded specimens were debinded in both air and nitrogen atmospheres. Wicking and solvent methods were also used to enhance debinding efficiency. The specimens were prefired at 120$0^{\circ}C$ and then sintered at 150$0^{\circ}C$ for 3 hours. Various defects were formed at mold temoperature of 3$0^{\circ}C$, 6$0^{\circ}C$ and 10$0^{\circ}C$ and any noticeable defect was not formed at 85$^{\circ}C$. The density of green body increased with mold temperature. Debinding in air atmosphere was more effective than in nitrogen atmosphere. Results also proved that wicking and solvent treatments helped minimize the number of defects.

• 한국식품조리과학회지
• /
• 제12권4호
• /
• pp.499-505
• /
• 1996

김치의 맛을 더욱 좋게 유지하면서 상품적인 가치를 높이는 한 가지 방법으로 김치 포장 용기를 개발하고자 본 연구에 착수하였다. 기존으로 사용되고 있는 PP(Polypropylene), PS(Polystyrene), PPC(Polypropylene+ceramic)와 본 연구에서 개발하고자 하는 용기인 3층으로 laminate 된 PPP(PETG+PS+PETG) 용기에 김치를 담고 6일간 발효시키면서 총젖산균수, pH, 산도, 색상, 포장내 기체조성과 자유용적, 그리고 관능적인 성질을 측정하여 비교한 결과는 다음과 같았다. 총젖산균수는 PP, PS, PPP 공기내의 김치는 발효 6시간 후부터 급증한 데 반하여 PPC는 24시간 후에 급증하였고 PPP의 것은 120시간까지도 높은 수가 유 지된 것으로 나타났다. pH는 발효 72시간에 모든 시료가 pH 4로 떨어졌으룩 PPP의 것은 발효 144시간까지 pH 4를 유지하여 다른 것보다 pH 저하가 다소 둔하였다. 색도에 있어서도 PP, PS, PPC 용기의 것이 발효48시간에 L b/a 값이 45.6-49로 떨어진 데 비하여 PPP는 53.21로 붉은색이 더 좋았고 5일 후에도 같은경향을 보였다. 또한 $CO_2$와 $O_2$의 존재량과 자유용적을 비교한 결과 PPP와 PPC가 $CO_2$량이 비교적 적고 내부자유용적의 팽창도가 높은 것으로 나타나 기체 투관성이 다른 용기에 비해 낮은 것을 알 수 있었다. 그리고 색, 풍미, 텍스쳐, 종합적인 기호도 등에 대한관능검사 결과에서도 PPP내의 김치가 발효 48시간까지 좋은 결과를 보였다. 또한 PPP 용기를 김치 포장용기로 사용하면 투명하므로 내용물의 종류와 상태를 용이하게 확인하여 선택을 확실하게 할 수 있게 하며 PP나 PS 용기보다 견고하여 내용물의 발효에 의한 팽 창시 파열되지 않아 유통기간 중 안전하며 김치의 품질도 좀 더 좋은 것으로 나타나 김치 포장용기로 적절하게 사용될 수 있을 것으로 사료된다.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.491-498
• /
• 1994

A fiber reinforced grouts were made using ordinary cement mortar and high effective water reducing agent (naphthalene sulfonate) were made by addition polypropylene fiber and carbon fiber. The physical properties of the grouts were investigated through the observation of the microstructure and the application of fracture mechanics. When the polypropylene fiber and carbon fiber were added respectively with 0.03 wt% to the grouts the compressive strength, flexural strength and Young's modulus were about 60∼63 MPa, 12.2∼12.4 MPa, 4.2∼4.8 GPa and 63∼68 MPa, 12.2∼12.6 MPa, 4.8∼5.1 GPa, and critical stress intensity were about 0.77∼0.82 MNm-1.5, and 0.80∼0.87 MNm-1.5 respectively, It can be considered that the strength improvement of fiber reinforced grouts (FRG) may be due to the removal of macropores and the increase of various fracture toughness, polymer fibril bridging and fiber bridging.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.837-848
• /
• 2006

This paper presents the test results of biological aerated filtration(BAF) process to replace activated sludge process by enhancing treated effluent quality and reducing the costs. In BAF process both BOD and SS compounds in wastewater are degraded and removed by biological reaction and filtration. Upflow BAF with expanded polypropylene media and downflow BAF with ceramic media were used to investigate the effects of hydraulic and organic loads on effluent quality. As a result, in BAF processes which has different media, upflow BAF reactor shows 5% higher efficiency than downflow BAF and this phenomena caused by backwashing methods and operational conditions. The results of influence factors analyzed by Factor Analysis Method in BOD and SS treatment efficiency are the size of media, hight of media bed and type of media. The quantitative effects of media size are 5.73% in TBOD, 5.78% in SBOD and 7.65% in TSS, so we confirmed the main factor is media size.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.446-451
• /
• 2018

In this study, different formulations of magnesium oxide and various modifiers (phosphoric acid, ferrous sulfate, pure acrylic emulsion, silicone acrylic emulsion, glass fiber, and polypropylene fiber) were used to prepare magnesium oxychloride cement composites. The compressive strength of the magnesium oxychloride cement was tested, and the softening coefficients of the composites after soaking in water were also calculated. The results showed that a magnesium oxychloride cement sample could not be coagulated when the MgO activity was 24.3%, but the coagulation effect of the magnesium oxide cement sample was excellent when the MgO activity was 69.5%. While pure acrylic emulsion, silicon-acrylic emulsion, and glass fiber showed insignificant modification effects on the magnesium oxychloride cement, ferrous sulfate heptahydrate, phosphoric acid, and polypropylene fiber could effectively improve its water resistance and compressive strength. When the phosphoric acid, ferrous sulfate heptahydrate, and polypropylene fiber contents were 0.47%, 0.73%, and 0.25%, respectively, the softening coefficient of a composite soaked in water reached 0.93 after 7 days, and the compressive strength reached 64.3 MPa.

• 한국세라믹학회지
• /
• 제30권2호
• /
• pp.131-138
• /
• 1993

The effects of silane coupling agents on the injection molding process were investigated using silicone nitride mixtrues with a binder system containing polypropylene as a major binder (55vol% solid loading). The formation of bonding between silicon nitride powder and coupling agents was confirmed through the analyses of powder surface. The use of coupling agents improved mixing characteristics judged by the torque change during mixing process. the coupling agents also reduced molten viscosity of the mixture considerably, which is a main factor to determine the flow of the mixture. However, the bonding between coupling agents and polymers had a negative effect on the debinding process by retarding the thermal decomposition.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.109-117
• /
• 1992

Mixing of ceramic-binder system was investigated experimentally and theoretically for application to Ceramic Injection Molding. Polypropylene, stearic acid, and paraffin wax were selected as the binder system, and silicon nitride fine powders were selected as the ceramic material. Single screw ectruder was employed as the mixing equipment. Theoretical analysis was performed to investigate the mixedness of mixture quantitatively. The analysis predicted average residence time average total strain, and average shear stress as a function of screw speed for mixtures of different volume fraction. Qualitative mixedness of mixture and characteristics of mixing were investigated by using SEM and EPMA. In addition, rheological properties of the mixture were investigated by using a capillary rheometer to examine possibility of injection molding.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.19.1-19.1
• /
• 2011

Effects of particle size, crystal structures and multilayer structures of $ATiO_3$, $ATa_2O_6$, $ANb_2O_6$, $AWO_4$, and $AMoO_4$ (A=Ni, Mg, Zn, Co) ceramic fillers on the dielectric properties of polystyrene (PS), polypropylene (PP) and polytetrafluoroethylene (PTFE) polymer matrices were investigated at microwave frequencies. The microwave dielectric properties of $ATiO_3$ (ilmenite), $ATa_2O_6$ (tri-rutile), $ANb_2O_6$ (columbite), AWO4 (wolframite), and AMoO4 (wolframite) ceramics were largely dependent on the structural characteristics of oxygen octahedra. The dielectric constant (K) of the composites was increased with the ceramic content. However, the dielectric loss (tan ${\delta}$) of the composites was affected by the type of ceramics and the crystallinity of polymers. For the composites with same amount of ceramics, the K was decreased and the tan ${\delta}$ was increased with the particle size of ceramics. Also, the dielectric properties of the composites were dependent on the multilayer structures with different arrangements. Several theoretical models have been employed to predict the effective dielectric properties of the composites. The frequency dependence of dielectric properties and the temperature coefficient of resonant frequency (TCF) of the composites were also discussed.

• 청정기술
• /
• 제27권1호
• /
• pp.24-32
• /
• 2021

미연 탄소(unburned carbon, UC)는 대두유를 포수제로 사용하여 부유선별공정을 통해 최대 85.8 wt%까지 비산재로부터 성공적으로 회수되었다. CM (ceramic microsphere)은 부유선별공정 다음 공정인 하이드로 사이클론 분리공정으로부터 18 wt%의 수율을 얻을 수 있었고 회수한 UC와 CM을 각각 고무증량재와 플라스틱(polypropylene) 충진재의 대체재로 사용하여 산업재로 활용 가능성을 조사하였다. 입자가 큰 UC는 볼밀을 사용하여 평균입경 10.2 ㎛로 작게 분쇄하였다. 분쇄된 UC를 점토 대신에 고무증량재로 사용하였을 때 인장강도와 신율이 다소 낮게 나와 고무제품의 표준조건을 만족시키지는 못하였다. 따라서 표준조건을 충족시키기 위해 UC는 고무와 보다 긴밀한 결합이 필요하였고, 이를 위한 표면 에너지를 향상시키는 추가적인 처리가 필요하였다. CM은 평균입경이 5 ㎛의 구형입자로 관찰되었으며, 입자의 표면을 페놀수지, 폴리올, 스테아린산, 올레인산으로 개질하였다. 표면 개질된 CM은 PP (polypropylene) 충진재로 사용되었다. 표면 개질된 CM을 사용한 제품은 흐름성은 양호하였으나 결합력 부족으로 충격강도 및 굴곡강도는 향상되지 못하였다. 그러나 표면 개질된 CM에 유기물과 무기물의 대표적 컬플링제인 실란 1 wt%을 추가적으로 혼합함으로써 충격강도 및 굴곡강도가 크게 향상되는 효과를 얻을 수 있었다.