• 전기화학회지
• /
• 제10권4호
• /
• pp.252-256
• /
• 2007

A series of spherical porous carbons were prepared via resorcinol-formaldehyde (RF) sol-gel polymerization in the presence of cationic surfactant (CTAB, cetyltrimethylammonium bromide), wherein the carbon sphere size was controlled by varying the CTAB introduction time after a pre-determined period of addition reaction (termed as "pre-curing"). The sphere size gradually decreases with an increase in the pre-curing time within the range of 30-150 nm. The carbons possess two types of pores; one inside carbon spheres (intra-particle pores) and the other at the interstitial sites made by carbon spheres (inter-particle pores). Of the two, the surface exposed on the former was dominant to determine the electric double-layer capacitor (EDLC) performance of porous carbons. As the intra-particle pores were generated inside RF gel spheres by gasification, the pore diameter was similar for all these carbons, thereby the pore length turned out to be a decisive factor controlling the EDLC performance. The charge-discharge voltage profiles and complex capacitance analysis consistently illustrate that the smaller-sized RF carbons deliver a better rate capability, which must be the direct result of facilitated ion penetration into shorter pores.

• 접착 및 계면
• /
• 제12권1호
• /
• pp.1-10
• /
• 2011

자동화된 반응 열량계를 이용하여 중합비율을 관찰하면서 blockiness가 다른 PVOH를 이용하여 VAE 에멀젼을 합성하였다. 입자 분포도를 관찰 결과 단량체와 물과 비율에 따른 일정한 그라프트율은 없었다. 초기 단량체-물의 비율이 낮은 곳에서 겔 효과가 관찰되었다. 또한 입자 분포는 넓고 이중 피크가 관찰되었다. 지속적으로 제한적으로 응징집되면서 입자성장이 이루어지는 것이 관찰되었다. 이것은 제한적인 응집현상과 사슬이 PVOH로 그라프팅되어 발생한 결과로 판단된다.

• Membrane and Water Treatment
• /
• 제13권2호
• /
• pp.105-110
• /
• 2022

Al₂O₃ positively charged nanofiltration composite membrane was successfully prepared with aluminate coupling agent (ACA) as modifier, sodium bisulfite (NaHSO₃) and potassium persulfate (K₂S₂O₈) as initiator and methacryloyloxyethyl trimethylammonium chloride (DMC) as crosslinking monomer. The surface of the membrane before grafting and after polymerization were characterized by SEM and FT-IR. Three factor and three-level orthogonal experiments were designed to explore the optimal conditions for membrane preparation, and the optimal group was successfully prepared. The filtration experiments of different salt solutions were carried out, and the retention molecular weight was determined by polyethylene glycol (PEG). The results showed that the polymerization temperature had the greatest effect on the rejection rate, followed by the reaction time, and the concentration of DMC had the least effect on the rejection rate. The rejection rates of CaCl₂, MgSO₄, NaCl and Na₂SO₄ in the optimal group were 83.8%, 81.3%, 28.1% and 23.6% (average value), respectively. The molecule weight cut-off of 90% (MWCO) of the optimal group was about 460, which belongs to nanofiltration membrane.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.10-14
• /
• 2011

Emulsion polymerization was carried out using RMA like MMA, EMA, BMA and Styrene(St.) as monomer for core-shell latex preparation. It was synthesized at $80^{\circ}C$ in the presence of anionic surfactant SLS. FT-IR, TGA and DSC analysis are used to confirm synthesized core-shell emulsion latexes and to investigate the thermal characteristics of them. From analysis of TGA and DSC, the differences of the decomposition rate and the activation energy are not so large. It considers that the pendent group is not affect of the thermal characteristics and stability on core-shell latexes, which is synthesized with RMA and Styrene.

• 공업화학
• /
• 제9권2호
• /
• pp.300-305
• /
• 1998

세 종류의 모노머로 구성된 삼모노머중합의 동력학을 입자성장이 끝난 interval II 동안 pseudo-homopolymerization (PHP) 방법에 의하여 연구하였다. 삼모노머중합의 Smith-Ewart 확장식과 순간중합조성식을 단일유화중합의 해당식과 유사하게 나타낼 수 있었다. 입자당 평균라디칼수와 순간중합조성을 라텍스입자내의 모노머조성을 변화시킴으로써 입자당 자유라디칼수가 한 개 이하인 계에서 예측하였다. 모델계산의 예로서 Styrene-Methyl methacrylate-Acrylonitrile(SMA)계의 속도상수들을 사용하였다.

• 한국응용과학기술학회지
• /
• 제17권3호
• /
• pp.192-197
• /
• 2000

Rosin moeity-containing monomer was prepared by the reaction of abietic acid with 2-hydroxyethyl methacrylate in tetrahydrofuran(THF) using diethyl azodicarboxylate as a catalyst. This new monomer was photo-polymerized to give thin films in the presence of a radical type initiator. The rate of photo-polymerization and amount of cured polymer were determined using the residual yield method. A thermogravimetric analysis of the cured polymer showed that the film was stable up to 170oC, at which point the polymer film has lost 10 wt % of its weight.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.198-198
• /
• 2006

We have identified sodium benzanilide (Na-BA), sodium diphenyl amine (Na-DPA) and sodium deoxibenzoin (Na-DB) as very efficient initiators for the living anionic polymerization of HIC. It has a slow propagation rate with the additive function of chain end protection, offering in the process a perfect control over MW and MWD. The well-defined amphiphilic coil-rod, coil-rod-coil, and rod-coil-rod block-copolymers of PHIC and P2VP with controlled architecture have been synthesized for the first time with ${\sim}100\;%$ yields. The resulting block copolymers showed lamellar film, donuts, solid and hollow micelles, by simply varying the solvents and the block compositions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1624-1626
• /
• 1996

PoIyimide thin films fabricated at substrate temperature $20^{\circ}C$, $40^{\circ}C$and $70^{\circ}C$ by vapor deposition polymerization method were confirmed by FT-IR spectra. It is found that deposition rate decreas according as increasing substrate temperature. Defusion depth of evaporation Al at which thin films be used for an insulating films between layers of semiconductor were about $300{\AA}$.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권5호
• /
• pp.391-395
• /
• 2006

Microcapsules containing fragrant oils as a core material were prepared by in situ polymerization, using melamine-formaldehyde prepolymer as the wall material. The several parameters, such as stirring times, stirring rates, emulsifier types, emulsifier concentrations, and the viscosity of the core materials, affect the characteristics of the microcapsules. These parameters were investigated by the analyses of microcapsule size, particle size distribution, and morphology. The average microcapsule size decreased with an increase in stirring time, stirring rate, emulsifier concentration, and viscosity of the core material. It was also found that poly(vinyl alcohol) as a protective colloid could enhance the stability of the melamine-formaldehyde microcapsules.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1419-1421
• /
• 2002

Plasma polymerization of thiophene was carried out in a vacuum reactor with capacitively coupled electrode. This paper describes the dependence of molecular structure and electrical properties on the polymerization conditions such as plasma energy, mass flow rate and pressure. The plasma polymerized thiophene films were chracterized by FT-IR spectroscopy and SEM. The IR analysis revealed the thiophene rings are broken by the discharge energy.