• 접착 및 계면
• /
• 제3권4호
• /
• pp.19-26
• /
• 2002

고무입자로 강인화된 폴리카보네이트의 강인화 메커니즘을 연구하기 위하여 synchrotron X-선을 이용한 소각 X-선 산란법을 이용하여 실시간으로 변형 과정에서의 폴리카보네이트 내의 micro-void의 생성과 성장과정을 조사하였다. 시료는 직경 $0.3{\mu}m$의 가교화된 아크릴 고무입자로 강인화된 폴리카보네이트이며 wedge test 방식으로 시료에 변형을 가하면서 X-선을 조사하여 산란빔의 세기 변화를 살펴보았다. 변형이 증가함에 따라 산란빔의 세기가 증가하며 이는 폴리카보네이트 매트릭스 내의 micro-void의 생성에 의한 것으로 추정된다. 이러한 micro-void는 폴리카보네이트 매트릭스 내부에 생선된 것으로서 이는 고무입자와 매트릭스간의 계면분리 현상이나 고무입자 내부의 cavitation에 의한 void는 아닌 것으로 추정된다. 이 micro-void는 큰 void들과는 달리 특정한 변형 정도에 이르러 일정한 크기를 갖고 생성되기 시작하며 변형 정도가 증가하여도 그 크기는 증가하지 않고 단지 그 양만이 계속적으로 증가함을 알 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제15권1호
• /
• pp.45-52
• /
• 1994

We present a theoretical study of the non-symmetrical A/BC polymeric system. The polymer blends consist of two phases, a pure polymeric phase A on one side and a mixture of polymers B as a compatibilizer and C on the other. The adsorption of homopolymer B to the interface improves the interfacial adhesion between two phases. By employing the functional integral techniques, we derive the mean-field equations and solve them numerically to obtain the interfacial properties including the concentration profiles in the limit of infinite molecular weight for the polymers. Thecalculations of the interfacial properties are performed for typical values of the Flory X parameters and the volume fraction of polymer B in the asymptotic mixture phase. The interfacial adsorption of polymer B and the degrees of the specific interaction between the polymers play an important role in modification of the interfacial properties.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.72-76
• /
• 2003

This paper deals with the stress singularity developed in a polymer layer that is coated to a concrete surface, due to temperature change. The boundary element method is employed to investigate the behavior of interface stresses. The polymeric layer is assumed to be a linear viscoelastic material, and is thermorheologically simple. The order of the singularity is obtained, numerically, for a given viscoelastic model. Numerical results exhibit the relaxation of interface stresses, and large gradients are observed in the vicinity of the free surface. Results show that the stress singularity factor is relaxed with time, while the order of the singularity increases with time for the viscoelastic model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.373-374
• /
• 2008

Insulating polymers and their composites have been widely used in various electric apparatus or cables. Recently, the effects of interfaces (metal/insulator or insulator/insulator interfaces) on electrical insulation have attracted much attention. However, interfacial phenomena in actual insulation systems and their physical backgrounds are not well understood yet. In this paper, the behaviour of charge carriers near the metal/polymer interface and its effects on conduction and breakdown phenomena are discussed. The metal/polymer interface strongly affects carrier injection, space charge formation and breakdown phenomena. Based on their experimental results, the physical backgrounds of the interfacial phenomena are explained.

• 접착 및 계면
• /
• 제5권3호
• /
• pp.29-36
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.569-574
• /
• 2014

Inverted bulk hetero-junction polymer solar cells (iPSC) composed of P3HT/PC61BM blends on the ZnO modified with benzoic acid derivatives-based self-assembled monolayers (SAM) are fabricated. Compared with the device using the pristine ZnO, the devices with ZnO surface modified SAMs derived from benzoic acid such as 4-(diphenylamino)benzoic acid (DPA-BA) and 4-(9H-carbazol-9-yl)benzoic acid (Cz-BA) as an electron transporting layer show improved the performances. It is mainly attributed to the favorable interface dipole at the interface between ZnO and the active layer, the eective passivation of the ZnO surface traps, decrease of the work function and facilitating transport of electron from PCBM to ITO electrode. The power conversion eciency (PCE) of iPSCs based on DPA-BA and Cz-BA treated ZnO reaches 2.78 and 2.88%, respectively, while the PCE of the device based on untreated ZnO is 2.49%. The open circuit voltage values ($V_{oc}$) of the devices with bare ZnO and SAM treated ZnO are not much different. Whereas, higher the fill factor (FF) and lower the series resistance ($R_s$) are obtained in the devices with SAMs modification.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.21-26
• /
• 1988

Composition with O-3 connectivity were fabricated from PZT and phenolic resin powders. These composites were investigated for dielectric and pizoelectric properties with PZT-polymer interface porosity variation. The interface porosity dependence of dielectric and piezoelectric properties was especially discussed by porosity factors. The interface porosity dependence of piezoelectric constant was larger than that of dielectric constant. It was considered that the interface pore plays the role of a stress buffer. Thus the local stress applied on PZT particles in the composite was remarkably diminish.

• 접착 및 계면
• /
• 제6권4호
• /
• pp.12-17
• /
• 2005

Natural fiber/phenolic biocomposites with chopped henequen fibers treated at various levels of electron beam irradiation (EBI) were made by means of a matched-die compression molding method. The interfacial property was explored in terms of interfacial shear strength measured by a single fiber microbonding test. The thermal properties were studied in terms of storage modulus, tan ${\delta}$, thermal expansion and thermal stability measured by dynamic mechanical analysis, thermomechanical analysis and thermogravimetric analysis, respectively. The result showed that the interfacial and thermal properties depend on the treatment level of EBI done to the henequen fiber surfaces. The present result also demonstrates that 10 kGy EBI is most preferable to physically modify the henequen fiber surfaces and then to improve the interfacial property of the biocomposite, supporting earlier results studied with henequen/poly (butylene succinate) and henequen/unsaturated polyester biocomposites.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1415-1418
• /
• 2007

Electronic and structural properties of the interfaces formed by pentacene deposited on a polymer-based dielectrics are investigated by electron spectroscopy, atomic force microscopy, and water contact angle measurement. There is strong influence of surface treatment of the polymer dielectrics on the energy level alignment and the surface topography upon the pentacene deposition.

• 접착 및 계면
• /
• 제4권2호
• /
• pp.10-20
• /
• 2003

This paper is relative to the electroless deposition of nickel or copper films on polyimide and polytetrafluoroethylene substrates. First, it is presented an original approach of the electroless process which consists in grafting nitrogenated functionalities on the polymer surfaces via plasma or VUV-assisted treatments operating in a nitrogen-based atmosphere ($NH_3$, $N_2$), and then in catalysing the grafted surfaces in an aqueous tin-free, Pd(+2)-based solution. Adhesion of the Pd(+2) catalytic species on polymer surfaces is explained by the formation of strong covalent bonds between these species and the grafted nitrogenated groups. Second, it is show how a fragmentation test performed in conjunction with electrical measurements can be used to characterize the practical adhesion of the electroless coatings deposited on flexible polymer substrates, and to evidence the influence of some experimental parameters (plasma treatment time and nature of the gas phase).