• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1050-1059
• /
• 2019

비결정성 영역에서의 유동단위의 고찰을 위하여 유동 파라메타와 결정크기로부터 폴리아미드 섬유고분자 물질의 자체확산, 홀 부피, 유동 열역학 파라메타 등을 계산하였다. 폴리아미드 섬유의 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하여 여러 온도의 공기, 증류수, 산, 염기 용액에서 실행하였다. REM 모델의 이론적인 응력완화 식에 응력완화 실험 결과를 적용하여 여러 가지 유동 파라메타를 계산하였다. 이들 시료의 유동 파라메타는 완화 스펙트럼, 자체확산, 점도 및 유동 활성화 에너지와 직접적인 연관을 갖는 것으로 규명되었다.

• Carbon letters
• /
• 제12권4호
• /
• pp.223-228
• /
• 2011

In this present work, the effect of additional heat-treatment (AHT) in the range from $1800^{\circ}C$ to $2400^{\circ}C$ on the chemical composition, morphology, microstructure, tensile properties, electrical resistivity, and thermal stability of commercial polyacrylonitrile (PAN)-based carbon fibers was explored by means of elemental analysis, electron microscopy, X-ray diffraction analysis, single fiber tensile testing, two-probe electrical resistivity testing, and thermogravimetric analysis (TGA). The characterization results were in agreement with each other. The results clearly demonstrated that AHTs up to $2400^{\circ}C$ played a significant role in further contributing not only to the enhancement of carbon content, fiber morphology, and tensile modulus, but also to the reduction of fiber diameter, inter-graphene layer distance, and electrical resistivity of "as-received" carbon fibers without AHT. The present study suggests that key properties of commercial PAN-based carbon fibers of an intermediate grade can be further improved by proprietarily adding heat-treatment without applying tension in a batch process.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1453-1461
• /
• 2015

In this article the non-linear behavior of the shear wall with low yield stress retrofitted with Glass Fiber Reinforced Polymer (GFRP) is investigated under pushover loading. The models used in this study are in ${\frac{1}{2}}$ scale of one story frame and simple steel plates with low yield stress filled the frame span. The models used were simulated and analyzed using finite elements method based on experimental data. After verification of the experimental model, various parameters of the model including the number of GFRP layers, fibers positioning in one or two sides of the wall, GFRP angles in respect to the wall and thickness of the steel plate were studied. The results have shown that adding the GFRP layers, the ultimate shear capacity is increased and the amount of energy absorbed is decreased. Besides, the results showed that using these fibers in low-thickness plates is effective and if the positioning angle of the fibers on the wall is diagonal, its behavior will improve.

• Composites Research
• /
• 제26권3호
• /
• pp.160-164
• /
• 2013

In this study, the effect of phosphoric acid (PA) as a fiber spinning aid on the strength increase of polyacrylonitrile (PAN) nano-fibers by using modified mechano-electrospinning technologies has been analyzed. The medium carbonization temperature of $800^{\circ}C$ has been selected for the future economic production of these new materials. The concentration of PAN in dimethyl sulfoxide (DMSO) was fixed as 5 wt%. The weight fraction of PA was selected as being 2%, 4%, 6%, and 8% in comparison to PAN. These solutions have been used to make the nanofibers. The mechano-electrospinning apparatus installed in KRICT was made by our own design. By using this apparatus the continous and highly aligned precursor nano-fibers have been obtained. The bundle of 50 well aligned nano diameter continuous fibers with the diametr of 10 microns with 6 wt% phosphoric acid for addition showed maximum mechanical properties of 1.6 GPa as tensile strength and 300 GPa as Young's modulus. The weight of final product can be increased 19%, which can improve the economical benefits for the application of these new materials.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.358-366
• /
• 2006

Thermotropic liquid crystal polymer (TLCP)-reinforced poly(butylene terephthalate) (PBT) composites were prepared by melt processing. The improvement in the mechanical properties and the processability of the PBT/TLCP composites was attributed to the reinforcing effect by TLCP phase and its well distribution in the PBT matrix. X-ray diffraction results demonstrated that a slow cooling process leads to the thicker lamellar structures and the formation of more regular crystallites in the composites. The incorporation of TLCP improves not only the tensile strength and flexural modulus but also the heat distortion temperature (HDT) of the PBT/TLCP composites. The HDT values of the composites were dependent on TLCP content. The improvement in the HDT values of the PBT/TLCP composites may be explained in terms with the increased flexural modulus, the development of more regular crystalline structures, and the enhancement of the ability of the composites to sustain the storage modulus by TLCP phase. In addition, the simple additivity rule makes it possible to predict the HDT values of the PBT/TLCP composites.

• 공업화학
• /
• 제3권1호
• /
• pp.81-87
• /
• 1992

폴리에틸렌에 아라미드단섬유를 보강시킨 복합재료를 roll mill을 사용하여 제조하였다. 섬유배향과 물리적 성질의 이방성을 주사전자현미경과 인장시험기로, 유변특성을 RDS 를 사용하여 측정하였다. 섬유의 배향은 roll 작업으로 어느 정도 이루어 졌으며, 섬유 loading 이 증가할수록 기계적강도의 이방성도 증가하였다. 섬유 loading 에 따른 복합점도의 상승은 저주파수 영역에서 뚜렷이 관찰되었으며, 특히 섬유 loading 이 작은 범위에서 현저하였다.

• Carbon letters
• /
• 제15권2호
• /
• pp.117-124
• /
• 2014

Conductive polymer composites (CPCs) consist of a polymeric matrix and a conductive filler, for example, carbon black, carbon fibers, graphite or carbon nanotubes (CNTs). The critical amount of the electrically conductive filler necessary to build up a continuous conductive network, and accordingly, to make the material conductive; is referred to as the percolation threshold. From technical and economical viewpoints, it is desirable to decrease the conductive-filler percolation-threshold as much as possible. In this study, we investigated the effect of polymer/conductive-filler interactions, as well as the processing and morphological development of low-percolation-threshold (${\Phi}c$) conductive-polymer composites. The aim of the study was to produce conductive composites containing less multi-walled CNTs (MWCNTs) than required for pure polypropylene (PP) through two approaches: one using various mixing methods and the other using immiscible polymer blends. Variants of the conductive PP composite filled with MWCNT was prepared by dry mixing, melt mixing, mechanofusion, and compression molding. The percolation threshold (${\Phi}c$) of the MWCNT-PP composites was most successfully lowered using the mechanofusion process than with any other mixing method (2-5 wt%). The mechanofusion process was found to enhance formation of a percolation network structure, and to ensure a more uniform state of dispersion in the CPCs. The immiscible-polymer blends were prepared by melt mixing (internal mixer) poly(vinylidene fluoride) (PVDF, PP/PVDF, volume ratio 1:1) filled with MWCNT.

• Composites Research
• /
• 제29권4호
• /
• pp.145-150
• /
• 2016

Polyvinylidene fluoride (PVDF)는 압전성을 나타내는 대표적인 고분자로 1960년대부터 많은 연구가 진행되어 왔다. PVDF는 반결정의 고분자로써 5가지의 결정 구조(${\alpha}$, ${\beta}$, ${\gamma}$, ${\delta}$, 그리고 ${\varepsilon}$형)로 구성되어 있다. ${\alpha}$형과 ${\delta}$형 결정은 전기적으로 반응하지 않는 무극성 결정구조이나 ${\beta}$형, ${\gamma}$형 그리고 ${\varepsilon}$형은 전기적으로 반응하는 극성 결정구조이다. 그 중에서도 ${\beta}$형 결정구조는 트랜스 형 분자 쇄가 평행으로 충진 된 형태로서 PVDF 단위체가 갖는 영구 쌍극자가 모두 한 방향으로 배열되어 있는 구조이기 때문에 자발 분극이 커지게 되고 압전성을 나타내게 된다. 일반적으로 ${\beta}$형 결정구조는 연신을 통한 ${\alpha}$형 결정구조의 변환을 통하여 얻을 수 있고, 연신 후 후처리 공정을 통해 그 양을 증가시킬 수 있다. 습식방사로 제조된 PVDF 섬유는 응고욕에서 극성 용매의 확산 메커니즘에 의해 ${\beta}$형 결정구조가 형성되는 장점을 가지고 있지만 극성 용매가 빠져나감과 동시에 섬유 고화가 진행되기 때문에 용매의 확산 경로가 섬유 내부 기공으로 남게 되는 단점을 가지고 있다. 이 기공은 폴링(Poling) 공정에서 전기장에 의한 분극을 방해하여 그 효과를 감소시키는 역할을 한다. 또한, PVDF 섬유가 압전 특성을 필요로 하는 응용분야에 사용되기 위해서는 섬유 가공 후에 전극이 반드시 부착되어야 하는데 섬유 형태로 제조된 PVDF에 전극을 형성하기는 매우 어렵다. 본 연구에서는 압전성을 갖는 PVDF 섬유를 습식 방사와 건식 방사의 혼합 공정으로 제조하여 기공 문제를 해결하였고, 전극이 섬유 내부에 삽입된 Core/Shell 형태의 PVDF 섬유를 제조하여 까다로운 전극형성 문제를 해결하였다.

• 폴리머
• /
• 제28권5호
• /
• pp.397-403
• /
• 2004

광개시제를 이용한 UV 조사방법으로 설폰화 PET-g-GMA 극세 이온 교환 섬유를 합성하고 이들의 구조 및 흡착 특성을 확인하였다. PET-g-GMA의 그라프트율은 UV 조사량, 조사시간 및 반응온도가 증가함에 따라 증가하였으며, 최적 합성조건은 UV조사량, 시간, 반응온도가 각각 450 W, 60 min, $40^{\circ}C$이었다. 한편 최대 설폰화율과 이온 교환 용량은 각각 8.12 mmol/g, 3.25 meq/g의 값을 나타내었다. 또한 설폰화 PET-g-GMA 극세 이온 교환 섬유의 인장강도는 반응전 PET 기재의 인장강도보다 그라프트 반응율이 증가함에 따라 약간 낮아지는 경향을 보였다. 설폰화 PET-g-GMA 극세 이온 교환 섬유의 칼슘 이온, 마그네슘 이온에 대한 흡착 시험 결과 마그네슘 이온이 칼슘 이온보다 흡착 파과 시간이 길었으며, 칼슘 이온, 마그네슘 혼합 용액에서 마그네슘의 흡착 파과 시간은 더욱 길어지는 경향을 보였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.199-202
• /
• 2002

Interfacial properties and electrical sensing for fiber fracture in carbon and SiC fibers/epoxy composites were investigated by the electrical resistance measurement and fragmentation test. As fiber-embedded angle increased, interfacial shear strength (IFSS) of two-type fiber composites decreased, and the elapsed time was long to the infinity in electrical resistivity. The initial slope of electrical resistivity increased rapidly to the infinity at higher angle, whereas electrical resistivity increased gradually at small angle. Furthermore, both fiber composites with small embedded angle showed a fully-developed stress whitening pattern, whereas both composites with higher embedded angle exhibited a less developed stress whitening pattern. As embedded angle decreased, the gap between the fragments increased and the debonded length was wider for both fiber composites. Electro-micromechanical technique can be a feasible nondestructive evaluation to measure interfacial sensing properties depending on the fiber-embedded angle in conductive fiber reinforced composites.