• 공업화학
• /
• 제5권5호
• /
• pp.786-794
• /
• 1994

폴리머-시멘트 모르타르의 강도와 내구성에 대하여 검토하였다. 폴리머-혼화제로서 styrene-butadiene rubber(SBR) 라텍스, ethylene-vinyl acetate(EVA) 에멀젼 및 polyacrylic ester(PAE) 에멀젼을 사용하고, 폴린머-시멘트 비를 다양하게 변화시켜(5, 10, 15, 20 wt%) 공시체를 제작하였다. 내구성의 평가시험으로는 동결융해시험, 내산성시험 및 내열성 시험을 수행하였다. 폴리머-시멘트 모르타르의 내동해성은 폴리머-시멘트비가 증가될수록 현저히 향상되었으나 내산성과 내열성은 저하되었다. SBR 폴리머-시멘트 모르타르의 강도(압축 및 휨강도)는 폴리머-시멘트비가 증가될수록 향상되었으나 EVA 및 PAE 폴리머-시멘트 모르타르는 폴리머-시멘트비 10wt%에서 최대치를 나타내었다.

• 마이크로전자및패키징학회지
• /
• 제23권3호
• /
• pp.15-20
• /
• 2016

In an effort to overcome the weakness of aerogel, polymer aerogels have been prepared by copolymerizing the different types of monomers through sol-gel process. Polymerizing the successive phase of a high internal phase emulsion, which has interconnected porous structure, porous polymer aerogel can be manufactured. In this paper, we use the styrene/divinylbenzene chain as a basic monomer structure, and additionally use 2-ethylhexyl methacrylate (2-EHMA) or 2-ethylhexyl acrylate (2-EHA) as monomers for distinguishing the visible mechanical properties of synthesized polymer aerogel. We can observe the different tendency of polymer aerogels by kinds of monomer or ratio. Flexibility and microstructure can be changed by the types of monomer. EHA polymer aerogel shows high flexibility and thin microstructure, and EHMA polymer aerogel shows high hardness and thick microstructure. EHA/EHMA polymer aerogel shows the intermediate nature between them. By utilizing the mechanical properties of three types of polymer aerogels to adequate situation or environment, polymer aerogels could be used as drug agent, ion exchange resin, oil filter and insulator, and so on.

• 한국세라믹학회지
• /
• 제12권4호
• /
• pp.9-18
• /
• 1975

Polymer emulsion was used as the admixture for the purpose of increasing the mechanical properties of cement mortar. The effect of polymer emulsion admixture on compressive strength and tensile strength and chemical resistance, relative humidity on compressive and tensile strength, sand particles on water absorption were studied. The results were as follows. 1. Polymer emulson modified mortar cured under 95% of realative humidity showed lower strength than the mortar cured at dry condition. 2. The maximum strength was attained at 10~20% of polystyrene and polyacrylic acid ester polymer-cement mortar. 3. The modified mortar (sand size rate (-9＋35)mech:(-35＋60)mech=4 : 1) was 1.5 times lower than the modified mortar (1 : 1) in water absorption. 4. Compared with the ordinary mortar, the modified mortar showed 2~3 times greater chemical resistance for 5% HCl or 5% H2SO4.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.374-374
• /
• 2006

Poly (N-isopropylacrylamide) (PNIPAAm) shows a lower critical solution temperature (LCST) at $32^{\circ}C$. Consequently, its thermosensitivity has extensively been investigated in coating materials as well as biomedical and agricultural industry. However, mechanical properties of the swollen gels are generally poor and reinforcement is often desired. A series of interpenetrating polymer networks (IPNs) and emulsion blends hydrogels of polyurethane (PU) and PNIPAAm were prepared in order to overcome the shortcomings of a normal PNIPAAm hydrogels. Regarding the mechanical reinforcement of swollen gel, a significant increase in compression and tensile properties has been obtained by incorporating PU.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.106-107
• /
• 2013

The purpose of this study is to characterize the bonding properties between reinforced bar and re-emulsion polymer cement mortar through the pull off test. The properties of polymer cement mortar before and after hardening were measured. Spiral reinforced steel bar was used to control the brittleness fracture of test specimens. In addition polymer content as experimental factors, the types of reinforced bar and corrosion were considered as well. Non linear FEM analysis was carried out to expect the behavior of bonding interface under the certain load.

• 폴리머
• /
• 제32권2호
• /
• pp.95-102
• /
• 2008

The $\alpha$,$omega$-diacrylate poly(dimethylsiloxane) (DA-PDMS) containing vinyl ester of versatic acid/vinyl acetate (Veova-10/VAc) was prepared by emulsion copolymerization of (DA-PDMS), Veova-10 (with VAc), and auxiliary agents at $85^{\circ}C$ in the presence of ammonium peroxodisulfate (APS) as an initiator. Sodium dodecyl sulfate (SDS) and nonylphenol ethylene oxide-40 units (NP-40) were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FT-IR). Thermal properties of the copolymers were studied by using thermogravimetric analysis(TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of variables such as temperature, agitation speed, surfactant kinds, molecular weights, initiator, and DA-PDMS concentrations on the properties of the silicone-containing Veova-10/VAc emulsions were examined. The calculation of monomer conversion versus time histories indicates that by increasing the DA-PDMS concentration the polymerization rate and the number of polymer particles decrease, respectively.

• Elastomers and Composites
• /
• 제43권4호
• /
• pp.221-229
• /
• 2008

전분을 매트리스 고분자로 하여 아크릴 모노머인 2-ethylhexylacrylate와 methyl methacrylate, acrylic acid를 그래프트 중합하였다. 중합은 라디칼 유화중합에 의하여 전분의 함량을 증가시키면서 수행되었다. 효소인 $\alpha$-amylase 가 전분 대비 0.174% 투입되었을 때 가장 안정한 중합물이 얻어졌으며 전분의 함량이 증가함에 따라 중합물의 유리전이온도가 상승하였다. 전분 함량의 증가에 따라 계내의 -OH기가 많아짐에 따라 중합물의 입자 크기와 점도가 증가하였다. Peel strength는 전분 함량이 증가할수록 -OH기 증가에 의해 중합물이 피착체 표면과의 친화력 상승이 일어나서 증가하였다. 반면 초기 점착력은 전분 함량이 증가할수록 유리전이온도의 증가에 따라 필름의 경도가 증가하면서 감소하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.262-262
• /
• 2006

Biodegradable and amphiphilic di-block and tri-block copolymers, prepared with monomethoxy poly ethylene glycol (MPEG) and ${\varepsilon}-caprolactone\;({\varepsilon}-CL)$, were used for the application of W1/O/W2 multi- emulsion capsules. The effects of topology and the ratio of hydrophilic moiety of PCL-based polymers on the encapsulation efficiency of the $W_{1}/O/W_{2}$ multi-emulsion capsules containing Ascorbic Acid-2-Glucoside (AA-2-G) were investigated. The ratio of PEG and PCL was 1:0.5, 1:0.75, 1:1, and 1:1.25. PEG-PCL block copolymers were added to the first step of the preparation of $W_{1}/O$ emulsions. The dispersion stability, the particle size, the morphology of the $W_{1}/O/W_{2}$ multi-emulsion capsules were observed using an on-line turbidity meter, dynamic light scattering (DLS), a confocal microscopy (with FITC) and an optical microscopy. Biodegradable behavior of the PEG-PCL block copolymers and release behavior of AA-2-G were also observed by Gel Permeation Chromatography (GPC) and High Performance Liquid Chromatography (HPLC).

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.58-66
• /
• 2001

Recently, polymer-modified mortar has been studied for proposed use on industrial floors as top coat with thin thickness, typically 5~15mm. The purpose of this study is to evaluate basic properties of self-leveling materials using polymer dispersions as kinds of SBR, PAE, St/BA with thin coat (under 3mm). Superplasticizer and thickener have been included in the mixes to reduce bleeding and drying shrinkage as well as to facilitate the workability required. The self-leveling materials using four types of polymer dispersion are prepared with polymer-cement ratio which respectively range from 50% and 75%, and tested for basic characteristics such as unit weight, air content, flow, consistency change and adhesion in tension. From the test results, the self-leveling materials using PAE emulsion at curing age of 28days are almost equal to those of conventional floor using urethane and epoxy resin. The adhesion in tension of self-leveling mortars using SBR latex and PAE emulsion at curing age of 3days is over 17 kgf/cm$^2$(1.67MPa). Consistency change is strongly dependent on the type of polymer dispersion. It is concluded that the self-leveling materials using polymer dispersions can be used in the same manner as conventional floor using thermosetting resin in practical applications, in the selection of polymer dispersions.

• Korea-Australia Rheology Journal
• /
• 제16권3호
• /
• pp.135-140
• /
• 2004

Morphological and rheological properties of the poly(methyl methacrylate) (PMMA) and polystyrene (PS) blends were studied by scanning electron microscopy (SEM) and advanced rheometric expansion system (ARES). From the SEM results, the PMMA-PS blends showed dispersed morphology and the particle size of the dispersed phase was quite small (0.1~0.6 $\mu\textrm{m}$ compared with other immiscible polymer blends. Values of the interfacial tension of the PMMA-PS blend were obtained from the Choi-Schowalter and the Palierne emulsion models using the storage modulus of the PMMA and PS, and found to be 1.0 and 2.0 mN/m, respectively. The interfacial tension between the PMMA and PS was also calculated from the Flory-Huggins polymer-polymer interaction parameter ($\chi$) and found to be from 0.98 to 1.86 mN/m depending on the molecular weight and composition. Comparing the values of the interfacial tension from the Flory-Huggins polymer-polymer interaction parameter and the values measured by oscillatory rheometer, it is suggested that the interfacial tension of the PMMA-PS blend obtained from the polymer-polymer interaction parameter are in good agreement with the values obtained by rheological measurements.