• Computers and Concrete
• /
• 제30권5호
• /
• pp.339-355
• /
• 2022

The high cost of ultra-high-performance engineered cementitious composite (UHP-ECC) is currently a crucial issue, especially in terms of the polyethylene (PE) fibers use. In this paper, cheap calcium carbonate whiskers (CW) were evaluated on the feasibility of hybrid with PE fibers. Diverse combinations of PE fibers and CW were employed to investigate the multi-scale enhancement on the UHP-ECC performance. A probabilistic-based UHP-ECC tensile strain reliability analysis approach was utilized, which was in general agreement with the experimental results. Furthermore, a multi-dimensional integrated representation was conducted for the comprehensive assessment of UHP-ECC. Results illustrated that CW improved the compressive strength and energy dissipation capacity of UHP-ECC owing to the microscopic strengthening mechanism. CW and PE fiber further promoted the saturated cracking of composite by multi-scale crack arresting effect. In particular, PE1.75-CW0.5 specimen possessed the best overall performance. The ultimate cracking width of PE1.75-CW0.5 group had 98 ㎛, which was 46.18% lower compared to PE2-CW0 group, the 28d compressive strength were slightly improved, the tensile strain capacity was comparable to that of PE2-CW0 group. The results above demonstrated that combinations of PE fiber and CW could significantly enhance the comprehensive performance of UHP-ECC, which was beneficial for large-scale engineering applications.

• 한국추진공학회지
• /
• 제11권2호
• /
• pp.79-85
• /
• 2007

Polyethylene-GOX (PE-GOX) 조합의 추진제를 사용하는 하이브리드 모터의 성능 예측 모델을 제시하였다. 성능에 영향을 미치는 인자들에 대해 자세한 고찰이 이루어 졌으며, 연료의 후퇴율과 산화제 조절 밸브의 개폐 응답 특성을 고려한 비정상 지배방정식을 구성하고 연소 중 O/F(산화제/연료)비에 따라 변화하는 열역학 데이터를 고려한 4차 Runge-Kutta 수치기법으로 해를 구하여 실험결과와 비교하여 잘 일치함을 확인하였다. 또한 연소 중 그레인의 후퇴율과 O/F비등의 성능 변수들의 영향을 분석하였다.

• Composites Research
• /
• 제12권2호
• /
• pp.91-100
• /
• 1999

고상공정법(SSP)에 의한 고강도폴리에틸렌(HSPE) 섬유의 제조는 초고분자량 폴리에틸렌 분말의 압출과 연신으로 용매를 사용하지 않고 제조된다. 고상공정으로 제조된 고강도 PE 테이프사의 특성을 분석한 결과, 고강도 PE 테이프사는 여신비의 증가에 따라 인장강도가 증가하였고, 파단면에서 fibril 분리현상이 많이 생겼다. 고강도 PE 테이프사의 표면을 산소플리즈마로 처리하여, 표면에너지를 측정하였고, 수지와 계면결합력을 분석한 결과, 100W와 5분간의 플라즈마 처리에서 가장 높은 계면결합력을 나타내었다. 고강도 PE 테이프사 강화복합재료의 물성을 겔방사법으로 제조된 고강도 PE 섬유강화 복합재료의 물성과 비교하여 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.435-438
• /
• 1991

This work is aimed to clarify the effect of only crosslinking of polyethylene on the water tree propagation and thus the crosslinking of LDPE was made by use of $Co^{60}$ $\gamma$-ray irradiation at room temperature. For this purpose, before water tree testing under same test conditions, injection molded samples were made of LDPE using CNRS laboratory model and also some of them were irradiated under different dose rate for crosslinking. Afterwards, the aged specimens were put into microscopic investigation as a mean to compare their different morphological aspects by use of SEM for the fractured surface. The SEM observation points out that the untreed region in the irradiated PE shows the densed structure whereas that in the LDPE is not closely packed. Also in the water treed region of LDPE, the density and the dimension of voids are higher than those in irradiated PE. Based on our results, it seems that the difference in the PE structure could sufficiently contribute to cause the different water tree propagation of these materials.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.239-244
• /
• 2020

Polyethylene (PE) micro-fiber have been prepared at different hot air temperature (60, 80 and 100 ℃) and different pressure (20, 40, 60 and 80 kPa) by melt centrifugal spinning technique. The parameters of melting centrifugal spinning including polymer contents, rotational velocity, temperature of hot air and pressure were optimized for the fabrication process. The study showed that 8000 rpm rotational velocity, 80 ℃ heated hot air and 40 kPa air pressure are the best condition to obtain uniform and strong PE fiber. The prepared PE fibers were analyzed by field emission scanning electron microscope and universal testing machine and found that fibers with reduced diameter and improved tensile strength are obtained at hot air condition.

• Structural Engineering and Mechanics
• /
• 제74권5호
• /
• pp.601-609
• /
• 2020

In this article, the Strain Energy Density (SED) averaged over a well-defined control volume at a notch edge was applied in combination with the Equivalent Material Concept (EMC) to assess the fracture behaviors of some keyhole-notched specimens made of a High-Density Polyethylene (HDPE-PE80) material under mixed-mode loading conditions. An experimental program was performed and 54 new experimental data were totally provided. Additionally, different loading mode ratios were regarded by changing the inclination angles of the notches with respect to the applied load directions. The results obtained from the determined criteria were in good agreement with those of the experimental data.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2000년도 춘계학술대회 논문집
• /
• pp.139-141
• /
• 2000

Carboxylic acid group was introduced onto polyethylene (PE) film by the grafting of acrylic acid onto PE film irradiated with electron beam. The grafting Condition such as reaction temperature, additives, total irradiation dose, thickness of PE film, and monomer concentration was examined. The extent of grafting was found to increase with increasing reaction temperature and total irradiation dose. The grafting yield was much enhanced with the addition of both FeSO$_4$ 7H$_2$O and H$_2$SO$_4$.

• 공업화학
• /
• 제5권6호
• /
• pp.1036-1043
• /
• 1994

폴리에칠렌을 가교시키는 방법으로서 silane에 의한 가교를 행하였다. Silane 가교는 압출기를 이용하여 $200{\sim}210^{\circ}C$ 용융온도에서 반응압출시켜 vinyltrimethoxysilane(VTMOS)를 PE 주쇄에 그라프트시킨 후, 3가지 silane 가교조건($80^{\circ}C$ 온수가교, $80^{\circ}C$ air oven 가교, 상온대기방치 가교)으로써 물 또는 수분에 노출시켜 가교를 완성하였다. Silane 가교된 폴리에칠렌의 결정 용융온도(Tm)의 변화, 밀도의 변화, 가교의 속도 거동을 측정하여 수지의 silane 가교조건에 따른 열적특성 변화를 연구하였다. Silane 가교는 용융상태의 고온에서 가교시키는 과산화물 가교와는 달리 고체상태에서 가교가 일어나기 때문에 그 가교조건에 따라 결정용융온도, 결정도 및 결정성장, 가교속도, 밀도의 변화가 다르고 수지의 종류도 열적특성에 영향을 미침을 알았다. 상온대기방치 가교된 silane 가교 linear low density polyehylene(LLDPE)은 결정이 성장되면서 서서히 가교반응이 진행됨에 따라 DSC에서 2차 용융 피크가 생성되지 않았으며, 재결정화하면 결합된 가교 site의 결정화 방해현상에 의해 결정용융온도가 낮아지는 거동을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.115-119
• /
• 1995

Electrical conduction characteristics of Polyethylene/Ethylene vinyl acetate blends of varing vinyl acetate content(1% and 4%) were investigated at electric fields ranging from 10$\^$6/ to 10.$\^$8/ V/cm over the temperature range of 30 and 85$^{\circ}C$. It was obser-ved that the extent of current density was changed at the blends and the rate of change of current den-sity was slightly suppressed at high field range, but PE and EVA were not shown. The change of con-duction characteristics and a suppression in rate of change of current density were attributed to the VA content in PE.EVA blends.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1881-1887
• /
• 2011

In this work the recyclable new polyethylene(PE) and polypropylene(PP), which are thermoplastic, have been investigated as the eco-friendly insulating candidates to replace the cross-linked polyethylene (XLPE). The temperature dependence of conductivities of these materials has been measured and its effects on electric field and space charge distribution in polymeric insulated power cable under temperature gradient have been calculated. It is shown that the sensitivity of conductivity to temperature change has more critical influence to determine the electric field distribution in the power cable than the absolute value of conductivity does and it can be said that the temperature dependence is one of most important factors for the power cable design.