• 한국의류학회지
• /
• 제25권1호
• /
• pp.154-161
• /
• 2001

We have treated polyester fabric with $CF_4,\;C_2F_6,\;SF_6\;and\;C_3F_6$ glow discharge plasmas to develop functional fabrics which preserve moisture transportation and water proofing nature. Modified properties were evaluated by water vapor permeation rate and breakthrough water pressure. The change of surface morphology was observed by SEM. Fiber interstice of the plasma treated fabric was calculated as $0.32{\mu}{\textrm}{m}$, and this value was sufficiently ideal as water repellent material. The moisture transportation of ${CF_4}-treated$ fabric was good as much as untreated fabric, and those of $C_2$F(sub)6-treated, SF(sub)6-treated fabrics were reduced by 1~3%, and that of ${C_3F_6}-treated$ fabric was reduced by 15%. The best treatment condition were 0.06 torr 120 seconds in $CF_4$, 0.05 torr 30 seconds in $SF_6$, 0.08~0.15 torr 90 seconds in $SF_6$ and 0.1 torr 45 seconds in $C_3F_6$ respectively. The grade of moisture transportation effect was $CF_4>C_2F_6>SF_6>>C_3F_6$, and water proofing effect was $C_2F_6{\approx}CF_4>C_3F_6>SF_6$. It was observed by SEM that the thin film was formed on the surface of the treated substrate by the fluorocarbon plasma treatment.

• 공업화학
• /
• 제1권2호
• /
• pp.133-139
• /
• 1990

서로 다른 스페이서기를 가지는 메타아크릴레이트 실란을 합성하여, 유리섬유 표면위에서 이들의 흡착거동 및 배향에 관한 FI-IR을 이용하여 연구하였다. 유리섬유/불포화 폴리에스테르 복합재료의 기계적 물성은 유리섬유 표면을 처리한 실란 카플링제의 스페이서기에 의해 크게 영향을 받았다. 실리카 표면에서의 실란 카플링제의 등온 흡착율은 메타아크릴레이트 실란의 메틸렌 스페이서기가 증가함에 따라 감소하였다. 긴 스페이서기를 가지는 실란 분자는 흡착 매체 표면에 활궁처럼 휜상태로 흡착하였다. 유리섬유/불포화 폴리에스테르 복합재료의 고온 습윤 강도를 증진시키기 위해 실란카플링제의 분자 구조와 기계적 물성과의 상관 관계에 대해서도 연구가 병행되었다.

• 폴리머
• /
• 제36권5호
• /
• pp.662-667
• /
• 2012

평판 디스플레이에 사용되는 PET 필름의 광학적 특성을 알아보기 위하여 필름 표면 굴절률, 필름 표면조도 및 필름 내부입자가 광투과율에 미치는 영향을 알아 보았다. 필름표면에 굴절률이 낮은 코팅층을 형성함에 따라 필름의 광투과율이 향상되었고, 최대의 광투과율을 가지는 코팅두께가 있음을 확인하였다. 표면 거칠기의 영향에 대해서는 표면조도를 나타내는 Ra를 입사 파장의 1/4 이하로 조절한 경우 광손실이 발생되지 않았다. 필름 내 무기입자는 입사된 광의 흡수 및 산란을 발생시켜 광손실을 증가시켰다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.448-451
• /
• 2007

DuPont Teijin $Films^{TM}$ (DTF) have developed engineered substrates specifically for the flexible electronics market. $Teonex^{(R)}$ Q65, $Melinex^{(R)}$ ST506 and ST504 are biaxially oriented crystalline polyesters with the option of planarised surfaces. These films are emerging as competitive materials for the base substrate in OLED displays and active matrix backplanes. Given the demanding dimensional reproducibility requirements in the display applications, it is critical to control the several factors that can influence the film distortion in order to achieve the ultimate performance. This paper will discuss the impact of thermal stress, mechanical stress and the processing environment on dimensional reproducibility of polyester film and give examples of how this impacts on the film in device manufacture.

• Journal of Microbiology and Biotechnology
• /
• 제3권2호
• /
• pp.123-128
• /
• 1993

The polyesters (polyhydroxyalkanoates; PHAs) production capability in a two-step cultivation of Alcaligenes eutrophus H16(ATCC 17699) was investigated by using various organic carbon sources. The carbon sources used included linear $C_2~C_10$ monocarboxylic acids, $C_3~C_10$ dicarboxylic acids, crotonic acid, and several linear vicinal and $\omega$-diols. The polyesters synthesized were characterized by 500 MHz $^1 H-NMR$ spectroscopy, intrinsic viscosity$[\eta]$ measurement in chloroform and differential scanning calorimetry (DSC). The PHAs synthesis data showed that the use of C-odd ($C_3, C_5, and C_7$) monocarboxylic acids resulted in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(P(3HB-co-3HV) (3HV content ranging 40 to 70 mol%) while the use of $C_9$ substrate gave the copolyester containing only 4 mol% of 3HV. All culture products obtained on $C_3$~C$_{10}$ dicarboxylic acids gave exclusively P(3HB). 500 MHz $^1 H-NMR$ analysis showed that all polyesters synthesized generally contained 1~2 mol% 3HV even for the unrelated substrates such as the carboxylic acids with even number of carbon. When $\alpha, \omega$-diols with even number of carbon were used as substrates, 4-hydroxybutyrate(4HB) was inserted into the polyester chain composed of P(3HB-co-4HB). Vicinal diols were generally not utilized by the bacterium for polyester production.n.

• 한국대기환경학회지
• /
• 제18권5호
• /
• pp.383-391
• /
• 2002

Six types of ozone passive samplers were fabricated with three different filter substrates and two colorants, and tested for their feasibility on atmospheric monitoring. These passive samplers are based on a colorant which fades (indigo carmine and ChromAir (K&M environmental Inc.)) or produces color (mixture of 3-methyl-2-benzothiazolinone acetone azine and 2-phenylphenol colorant) upon reaction with ozone, whose concentration can be determined by reflectance measurement of the color change. Three filters, namely Whatman No.1 paper, SG81 chromatography paper and Silica Gel coated on polyester (TLC Plates), were prepared and coated with two colorants. The response of these passive samplers in ozone chamber were tested and compared with ChromAir (K&M environmental Inc.) passive sampler. The response of Silica Gel filter impregnated with indigo carmine was the best at the constant concentration exposure.

• 한국미생물·생명공학회지
• /
• 제19권1호
• /
• pp.94-99
• /
• 1991

- The further study for the identification of the previously reported pink-pigmented facultative methylotrophic bacterium (PPFM) GL-10 was carried out. The PPFM GL-10 was Gram nagative, rod, and motile by a single polarly inserted flagellum. The colonies were smooth, pink, circular, along with convex with entire margin. The isolate could utilize C1 compounds and a variety of multicarbon substrates as sole carbon and energy source. The isolate was obligately aerobic, and exhibited both catalase and oxidase activities. The deoxyribonucleic acid base composition was 65-67 mol% guanine plus cytosine. The isolate was mostly identical with Methylobacterium extorquens and named Methylobacterium sp. strain GL-10. Methylobacterium GL-10 accumulated a copolyester of 3-hydroxybutyrate and 3-hydroxyvalerate (poly-3HB/3 HV) when grown in nitrogen-free culture media containing sodium propionate as substrate at the second polyester accumulation stage. The composition of copolyester, as determined from $^1h$ NMR spectra, was 23 mol% of 3-hydroxyvalerate (3HV).

• Macromolecular Research
• /
• 제16권7호
• /
• pp.651-658
• /
• 2008

Poly(butylene succiate) (PBS), poly(butylene succinate-co-L-lactate) (PBSL), and poly(butylene succinate-co-6-hydroxycaproate) (PBSCL) polymers were degraded by lipase $PS^{(R)}$, and the enzymatic degradation mechanism of PBS was analyzed in detail. The enzymatic degradation of PBS gave 4-hydroxybutyl succinate (4HBS) as the main product. An exo-type hydrolysis mechanism was proposed based on this observation. The terminal chain of PBS had conformational similarity to ordinary tri- and diglycerides and could be incorporated as a substrate in the active site of this lipase. The surface adsorption of the lipase was much larger on PBS and its copolymer films than on the other polyester films because the lipase adhered quite strongly to the polymer terminal through a specific adsorption mechanism. Kinetic analysis showed that the total number of surface adsorption points per unit area of PBSL and PBSCL copolymers was larger than that of the PBS homopolymer.

• 전자공학회논문지
• /
• 제53권8호
• /
• pp.119-126
• /
• 2016

본 논문에서는 의복용 무선전력전송 시스템을 구축을 위한 평면형 직물공진기를 제안하고, 공진기에 사용된 의복용 직물기판의 재질별 특성을 분석하였다. 평면형 직물공진기는 공진주파수가 1-10 MHz가 되도록 직물기판 위에 전도성 물질로 루프 및 코일을 평면 설계하였다. 의복용으로 많이 사용되고 있는 폴리에스테르 섬유와 면을 직물기판으로 사용하였으며, 평면 루프와 코일은 동테이프(copper tape)와 실버페이스트(silver paste)로 설계하였다. 자기공진형 무선전력전송 시스템에 적용된 직물의 재질별 특성을 분석하기 위해 송신부와 수신부를 대칭으로 설계하였다. 실험 결과, 낮은 유전상수 및 비교적 두꺼운 두께를 가진 직물기판과 표면저항이 작은 도체성 재질의 패턴(루프 및 코일)으로 제작되었을 때, 의복용 무선전력전송 시스템이 높은 전송효율을 보였다. 본 연구를 통해 제안된 평면형 직물 공진기는 무선전력전송 기술의 영역을 의복용으로 넓힐 수 있는 가능성을 보여주었다.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.