• Fibers and Polymers
• /
• 제2권2호
• /
• pp.81-85
• /
• 2001

The effects of rate of phase separation to ester interchange reactions and the repulsive pair interaction energy on the phase behavior in a phase-separated immiscible polyester blend are investigated using a Monte Carlo simulation method. The time evolution of structure factor and the degree of randomness are monitored as a function of homogenization time. When the phase separation is dominant over ester interchange reactions, the domain size slowly increases with homogenization time. However, when the pair interaction becomes less repulsive, the domain size does not significantly change with homogenization time. On the other hand, when ester interchange reactions are dominant over the phase separation, the homogenization proceeds without a change in the domain size. The higher the extent of phase separation, the lower the increasing rate of the DR. However, when the phase separation is sufficiently dominant, the effect of the extent of phase separation on the increasing rate of the degree of randomness become less significant.

• The International Journal of Costume Culture
• /
• 제6권2호
• /
• pp.134-146
• /
• 2003

Polyester of linear homopolymer poly(ethylene terephthalate)(PET) was chemically modified through the formation of branched copolymer to improve the undesirable properties of fiber. Photo-induced graft copolymerization of the acrylic monomers acrylic acid (AA) and methyl acrylate (MA) in the liquid and vapor phase, respectively, onto N,N-dimetylformamide (DMF)-pretreated PET fibers was carried out. The effect of various synthesis conditions and DMF pretreatment of the PET on the graft yield was investigated. Grafting mechanism was analysed. The grafting was promoted by increasing DMF pretreatment temperature and amount of DMF retention in the fiber. The increasing biacetyl and monomer flow time, and irradiation time enhanced the grafting up to a certain amount and thereafter it decreased.

• The International Journal of Costume Culture
• /
• 제5권2호
• /
• pp.53-65
• /
• 2002

Morphology of polyester fiber was physically modified by solvent treatment. PET fiber was treated with N,N-dimethylformamide (DMF) at 100, 120, $140^{circ}C$ for 10 minutes without tension. The structural changes in the morphology of DMF-induced modified PET fiber were FTIR and SEM analysis. Also dyeing behavior of DMF-treated polyester fibers with various disperse dyes was studied to detect changes of amorphous area in fine structure. DMF treatment resulted in increases in total void content, degree of crystallinity, trans isomer content, chain folding, segmental mobility and molecular packing, but it resulted in decreases in amorphous orientation, intermolecular forces and individual void size through longitudinal shrinkage, lateral welling and removal of oligomers. Void-size distribution could be estimated from the dye uptake with various sizes of disperse dyes. In contrast to the large increases in dye uptake with small dye molecules, there is no and little dye uptake with the bulkiest dye, which means that void size is bigger or smaller than the volume of each dye. Diffusion rates of dye molecules showed increases. This dyeing study revealed that the disperse dyeing is very effective method for characterizing the internal morphology of polyester fiber.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.26-33
• /
• 2004

Two reactive disperse dyes having $\alpha$-bromoacrylamide or acrylamide group were synthesized and their dyeing properties were compared with a disperse dye. Dyeing properties of reactive disperse dyes were strongly influenced by the chemical structure of reactive group. The amount of absorbed reactive disperse dye containing $\alpha$-bromoacrylamide group on polyester fiber was less than the disperse dye, and that on nylon fiber was much higher. When polyester and nylon fiber were simultaneously dyed in a dye pot, nylon fiber absorbed the reactive disperse dye more than polyester fiber. The reactive disperse dye having acrylamide group could reduces difference in color depth to a large extent, but the application of carrier or variation of dyebath pH were not sufficient for giving the same color depth to both fibers. The N/P union fabric could be dyed with the reactive disperse dye and its wash fastness were good to excellent.

• 한국염색가공학회지
• /
• 제11권3호
• /
• pp.1-8
• /
• 1999

Polyester ultrarmcrofiber(UMF, fiber fineness : 0.05d) and the other three kinds of polyester fibers(0.52, 1.04 and 2.08d) were dyed with two disperse dyes, C.1. Disperse Red 60 and Blue 56. Dyeing rates and absorption isotherms of these dyes have been measured at 100, 115 and $130^\circ{C}$ in water system. The dye bath was maintained at pH 5.0 with acetic acid(0.1mo1/1) /sodium acetate(0.1mo1/1) buffers and a liquor ratio of 1000：1. The absorption isotherms from two disperse dyes are nearly linear up to the saturation values, which increase with the temperature of dyeing. Dye uptake decreased with the fiber fineness in lower temperature $100^\circ{C})$, whereas increased in higher temperature$(130^\circ{C})$. A comparatively greater quantity of dye is necessary to dye ultrarmcrofiber fabrics than conventional fabrics. Disperse Blue 56 having a good build-up property is agreed to Fothergill's equation, which is inversely varied with the fiber fineness by the quantity of dye necessary to obtain a given shade.

• 한국의류산업학회지
• /
• 제8권3호
• /
• pp.357-362
• /
• 2006

This study is to evaluate the objective sensibility of the commercial lining fabrics. Five kinds of the linings were collected by adding taffetas with four kinds of fibers (polyester, nylon, rayon, and acetate) to one polyester stretch fabric. The six basic mechanical and hand properties were studied by using KES-FB system (Kawabata Evaluation System). The result of measuring the mechanical properties shows that polyester has high bending rigidity (B), that polyester-stretch has a high value of linearity of load-extension curve (LT), tensile energy (WT), tensile resilience (RT), and coefficient of friction (MIU) and a low value of bending rigidity(B), shear property, and geometrical roughness (SMD). The nylon has a high value of bending rigidity (B), shear property, and compression resilience (RC). The rayon has a high value of coefficient of friction (MIU) and linearity of compression-thickness curve (LC) and a low value of shear property, and the acetate has a low value of shear property. The result of hand value shows that polyester, nylon, and acetate are a high value of KOSHI (stiffness), NUMERI (smoothness), and FUKURAM (fullness & softness), and they feel stiff and massive, that rayon has a low value of NUMERI and FUKURAMI. The total result of hand value shows that polyester taffeta and polyester stretch fabric are about the same as the best material for the lining of a woman's dress for spring and summer, and the next thing is acetate, but nylon and rayon are somewhat inferior materials. This provides a fundamental data for the comfortable clothing production of a higher value-added product through the study on the mechanical and hand properties of the lining as well as the right side of fabrics.

• 한국의류학회지
• /
• 제6권1호
• /
• pp.67-72
• /
• 1982

이 해설문에서는 최근 수년간 개발된 합성섬유에의 Comfort 가공 : Polyester 섬유의 촉감 개선, 소수성섬유에 있어서 친수성을 향상시키기 위한 화학적인 처리, 대전방지가공, 오염방지가공, 그리고 유연제에 대한 것을 문헌조사를 통해 소개하고 있다.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.352-357
• /
• 2006

The cotton fabrics were pretreated by sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino) benzenesulfonate (DBDCBS) at alkaline condition ofroom temperature and then dyed with four disperse dyes having amino groups (C.I. Disperse Yellow 9, C.I. Disperse Red 11, C.I. Disperse Blue 56 and C.I. Disperse Violet 1) at acidic condition of high temperature. A novel hetero-bifunctional bridge compound, DBDCBS, has two reactive groups such as dichloro-striazinyl group and ${\alpha},\;{\beta}$-dibromopropionylamido group. The first has reactivity towards hydroxy group of cellulosic fiber and the second shows reactivity towards amino groups of disperse dye containing amino groups. The results indicate that it is possible to dye polyester/cotton blend at one-bath dyeing using one kind of disperse dye containing amino groups. Therefore, two kinds of dyeing methods such as two-bath process one-bath dyeing and one-bath process one-bath dyeing were investigated and their dyeabilities were compared. The differences between these two methods were negligibly small so that perfect one-bath one-step dyeing of polyester/cotton blend by one kind of disperse dye was achieved.

• 한국의류산업학회지
• /
• 제3권3호
• /
• pp.277-282
• /
• 2001

The effect of chitosan on antibacterial activities of cotton, wool and polyester fibers was investigated by shake flask method. Chitosan was treated in 0.1%, 1% and 2% $NaBO_3$ solution to reduce the molecular weight in 4 steps, wadding of cotton, wool and polyester were treated in 0.1%, 0.3% and 0.5% of chitosan solution which were dissolved in 2% acetic acid aqueous solution. The antibacterial activities of the fiber wadding treated and untreated by chitosan against Escherichia coli, Proteus vulgaris and Stephylococcus aureus were measured by shake flask method. On the untreated waddings, cotton showed better antibacterial activities than wool, but on the treated ones, wool showed better than cotton. The antibacterial activity of polyester was better than that of cotton or wool which preserved before and after the chitosan treatment against the three kinds of bacteria. When the chitosan treated cotton waddings was retreated in NaOH aqueous solution, their bacterial activities decreased. After laundering, the antibacterial activities of the treated cotton and wool waddings kept good, but that of the treated polyester reduced by almost half.

• 산업융합연구
• /
• 제21권2호
• /
• pp.93-101
• /
• 2023

본 연구에서는 칼과 가위 및 화학약품에 의한 물리·화학적 섬유 손상을 분석하여 손상의 원인 파악을 위한 기술 데이터 자료로써 활용하고자 하였다. 칼 4종류 및 가위 5종류와 4종류의 화학약품(황산, 염산, 수산화나트륨, 수산화칼륨)을 이용하여 면(Cotton), 울(Wool), 폴리에스터(Polyester), 레이온(Rayon), T/C(Polyester 50%, Cotton 50%), T/W(Polyester 50%, Wool 50%)에 물리·화학적 손상을 생성하여 공구와 화학약품에 따른 손상을 분석하였다. 칼과 가위에 의한 관통 손상은 칼의 날 부분이 관통한 경우 공통으로 "V" 유형의 손상이 나타났으며, 칼의 등 부분이 관통한 칼의 경우 "T", "ㅁ", 갈고리, "ㄷ" 유형의 손상이 나타났다. 또한, 가위의 경우 모두 "Y" 유형의 손상이 공통으로 나타났다. 화학약품에 의한 섬유 손상은 유류 흔적, 부식, 분해, 수축, 변색 등 다양한 손상이 나타났으며, 화학약품과 섬유의 종류에 따라 나타나는 손상에 차이를 보였다. 섬유의 물리적 손상은 공구의 형태적 특성에 따라 나타나는 특징에 차이를 보였으며, 화학적 손상은 화학약품과 섬유의 종류에 따른 특징 차이를 보임을 확인하였다.